First seen by our source: 2 days ago
Open Role (5 Positions): Industrial Automation and CSV Engineer - Ontario, Canada (Cambridge)
@ VTI Life Sciences
Ontario
Overview
VTI Life Sciences is hiring up to five contract Senior Automation Validation Engineers for a project on automated and robotic medical-device assembly equipment in Cambridge, Ontario. The work covers hands-on validation and testing of PLC and SCADA controlled systems, including Software V&V, FAT and SAT protocols. The contract runs October 26, 2026 through January or February 2027, about 14 billable weeks, with possible extension.
Responsibilities:
- Write, review and execute Software V&V, FAT and SAT protocols
- Test PLC logic, interlocks, alarms and recovery conditions
- Verify device assembly and equipment functional testing
- Confirm part traceability and data integrity
- Document results, discrepancies and deviations
Requirements summary:
- Six years of PLC and SCADA automation experience
- Four years of validation in a regulated manufacturing environment
- Hands-on Rockwell Automation and FactoryTalk View experience
- Knowledge of the software V&V lifecycle
- Ability to read PLC logic and electrical drawings
Tools & skills
Source and dates
Source type not verified · apify-linkedin
- Employer posting date
- Not provided
- First seen by our source
- 2026-11-15
- Source record updated
- 2026-11-15
These dates describe the source record, not a live verification that the employer is still hiring. Check the original posting.
Job details
| Seniority | Senior |
| Department | Quality assurance |
| Experience | 6+ years |
| Travel | air: none · ground: none |
| Work setting | Plant or factory, Laboratory |
| Position | Sitting and standing |
| Physical demands | physical low · computer high |
| Languages | English |
Summary and details written by AI from the posting; the employer’s posting is the authority.
VTI Life Sciences
Saved company profile
Historical company information from a saved The Jobs API profile (LinkedIn/Crunchbase fields). It is not live-verified; figures may have changed. Missing values remain unknown.
VTI is a consulting firm specializing in automation and CQV services to biotech, pharmaceutical, and med device clients.
Full company description
VTI Life Sciences is an ISO 9001:2000 Certified Company with the experience, expertise, and commitment to provide the superior service required to meet all of your validation and compliance needs. We offer a full spectrum of services including: computer validation, cleaning validation, process validation, clean room certification, temperature mapping, process equipment and facility qualification, and much more. Dedication to quality, personalized support and the success of your projects are the foundation of our company. VTI Life Sciences has offices located in San Diego, San Francisco, Boston, and China.
- LinkedIn followers
- 6,120
- People associated on LinkedIn
- 53
- Reported office locations
- 10815 Rancho Bernardo Road, Suite 120, San Diego, California 92127, US
- 10815 Rancho Bernardo Road, Suite 120, San Diego, CA 92127, US
- 10815 Rancho Bernardo Road, Suite 120, San Diego, CA 92127, US
- 10815 Rancho Bernardo Road, Suite 120, San Diego, CA 92127, US
- 10815 Rancho Bernardo Road, Suite 120, San Diego, CA 92127, US
- Other recorded names
- VTI Life Sciences
- Specialties
- Computer Validation
- Commissioning & Qualification (C&Q)
- Cleaning & Process Validation
- Project Management
- Automation & Control Systems
- IT Services
- Calibration
- Process Equipment & Facility Qualification
- Quality & Regulatory Services
- and Temperature Mapping
- Profile identifies a recruitment agency
- No
- Reported total investment
- 0
Currency and observation date were not supplied; this is not a current valuation or a funding round.
VTI Life Sciences is an ISO 9001:2000 Certified Company with the experience, expertise, and commitment to provide the superior service required to meet all of your validation and compliance needs. We offer a full spectrum of services including: computer validation, cleaning validation, process validation, clean room certification, temperature mapping, process equipment and facility qualification, and much more…
| Field | Value |
|---|---|
| Industry | Biotechnology |
| Company size | 51-200 employees |
| Headquarters | San Diego, California |
| Organization type | Privately Held |
| Year founded | 1996 |
| Specialties | Computer ValidationCommissioning & Qualification (C&Q)Cleaning & Process ValidationProject ManagementAutomation & Control SystemsIT ServicesCalibrationProcess Equipment & Facility QualificationQuality & Regulatory Servicesand Temperature Mapping |
| Open jobs on Jobsy | 1 |
| View page |
Engagement: Contract, with possibility of extension
Anticipated term: October 26, 2026 through January / February 2027
Duration: Approximately 14 billable weeks, allowing for two non-billable weeks during the winter holidays
Position Summary
We are seeking experienced Senior Automation Validation Engineers to support our project involving automated and robotic medical-device assembly equipment.
The successful candidates will provide hands-on validation and testing support for PLC and SCADA controlled manufacturing systems. This role requires strong knowledge of medical device assembly, industrial controls, automation architecture familiarity, equipment functionality, computerized system validation, data integrity, and regulated manufacturing practices.
Candidates must be local to the Cambridge, Ontario area or willing to temporarily relocate for the duration of the assignment. Routine travel expenses are not anticipated.
Key Responsibilities
• Edit, review, dryrun, and execute Software V&V, FAT and SAT protocols for Automated Machinery equipment.
• Plan and perform software verification and validation activities throughout the system lifecycle.
• Test PLC logic, equipment sequences, interlocks, alarms, error codes, system messages, and recovery conditions.
• Execute feature, unit, integration, functional, and User Acceptance Testing.
• Challenge sensors, actuators, electrical controls, safety devices, vision systems, and robotic equipment.
• Verify device assembly processes and equipment-based functional testing.
• Confirm part traceability, electronic records, database transactions, and system data flows.
• Assess data integrity controls in accordance with regulated-industry expectations.
• Review PLC and SCADA configurations, automation architecture, control, and electrical documentation.
• Document test results, discrepancies, objective evidence, and deviations with a high level of accuracy.
• Collaborate and establish excellent rapport and communication with equipment suppliers, controls engineers, quality, manufacturing, and project stakeholders.
• Support troubleshooting, deviation resolution, corrective actions, and protocol closeout.
Required Qualifications
• Minimum of six years of experience working with PLC and SCADA controlled industrial automation or assembly equipment.
• Minimum of four years of experience working in validation in a regulated manufacturing environment.
• Demonstrated expertise reviewing, editing, authoring and executing Software V&V, FAT, SAT protocols.
• Strong understanding of the software verification and validation lifecycle.
• Knowledge of PLC programming concepts and industrial automation architecture.
• Hands-on experience with working with the Rockwell Automation suite and FactoryTalk View.
• Experience testing equipment alarms, error codes, interlocks, system messages, and abnormal operating conditions.
• Working knowledge of electrical panels, controls, sensors, actuators, vision systems, and robotic machinery.
• Experience with databases, electronic records, part-traceability systems, and data-integrity principles.
• Ability to interpret PLC logic, electrical drawings, functional specifications, and equipment design documentation.
• Strong technical writing, troubleshooting, and cross-functional communication skills.
Strongly Preferred
• Medical-device assembly or manufacturing experience.
• Experience validating automated or robotic medical-device assembly lines.
• Experience with Ignition SCADA environments.
• Familiarity with GxP practices, computerized system validation, and applicable medical-device quality requirements.
• Experience validating vision inspection, device functional testing, serialization, or part-traceability systems.
Assignment Requirements
• Must be available to work onsite in Cambridge, Ontario.
• Candidates must already be local or willing to relocate temporarily to avoid recurring travel expenses.
• Two weeks of non-billable time are anticipated during the winter holiday period.
- • Strong performers may be considered for an extension beyond the initial project stage.
Journal
Only you can see this. Kept on this device, and in your account when you sign in.