Posted 2 months ago
Building Automation Systems Installation Technician
@ GoodWork.ca
York, Ontario
Overview
GoodWork.ca is posting a full-time, permanent Building Automation Systems (BAS) Installation Technician role with Watershed Technologies Inc. in North York, ON, on site at GTA client locations. The hire mounts and wires BAS controllers, panels and field devices and readies installed systems for commissioning. The posting states $37.00 per hour for 40 hours per week, with mileage reimbursement, on-site parking, paid time off and tools provided.
Responsibilities:
- Install BAS controllers, panels, sensors and field devices per drawings
- Pull, route, label and terminate low-voltage control wiring
- Perform point-to-point wiring verification and loop testing
- Install BACnet MS/TP and BACnet/IP field bus connections
- Retrofit and replace obsolete controllers and field devices
Requirements summary:
- College diploma or degree in electrical, electronics, automation or controls
- 2 to 3 years hands-on BAS or low-voltage installation experience
- Ability to read electrical drawings and control schematics
- WHMIS 2015 and Working at Heights certification
- Valid Ontario driver's licence and own transportation
- 309A Certificate of Qualification is an asset
Tools & skills
Source and dates
Source type not verified · apify-linkedin
- Employer posting date
- 2026-09-07
- First seen by our source
- 2026-11-14
- Source record updated
- 2026-11-14
These dates describe the source record, not a live verification that the employer is still hiring. Check the original posting.
Job details
| Seniority | Mid level |
| Department | Maintenance & repair |
| Experience | 2+ years |
| Hours per week | 40 |
| Schedule | day |
| Travel | air: none · ground: moderate |
| Work setting | Client sites, Plant or factory |
| Position | Sitting and standing |
| Physical demands | physical moderate · computer low |
| Licences & certifications | WHMIS 2015, Working at Heights, Certificate of Qualification 309A |
| Driver’s licence | required, own vehicle |
| Encouraged to apply | Newcomers to Canada, Students & youth, Indigenous peoples, People with disabilities, Older workers |
| Education | College diploma (required) |
| Fields of study | electrical systems, electronics, automation, instrumentation, building controls |
| Perks mentioned | Generous paid time off, Transit support |
Summary and details written by AI from the posting; the employer’s posting is the authority.
GoodWork.ca
| Field | Value |
|---|---|
| Open jobs on Jobsy | 26 |
Job Opportunity
Position: Building Automation Systems (BAS) Installation Technician
Company: Watershed Technologies Inc.
Location: North York, ON (on site, GTA client locations)
Full-time, permanent | $37.00/hour | 40 hours/week
Watershed Technologies Inc. is a building automation and energy analytics firm serving multi-residential and institutional buildings across the Greater Toronto Area. We are hiring a BAS Installation Technician to carry out the field installation of building automation systems — mounting and wiring controllers, panels and field devices, and turning drawings into working installed systems ready for commissioning.
This is a hands-on installation role. Programming, graphics development and sequence commissioning are handled by our controls and commissioning team.
What You'll Do
Install and mount building automation system (BAS) controllers, control panels, enclosures, sensors, actuators, valves, dampers and relays at client sites in accordance with drawings and specifications
Pull, route, label and terminate low-voltage control wiring and communication cabling between controllers, field devices and control panels
Lay out and install control panel backboards, device mounting hardware, raceway and cable management for BAS field equipment
Install and terminate field devices including temperature, pressure, flow, humidity and air quality sensors, differential pressure switches, current sensors and end switches
Read and interpret electrical drawings, wiring diagrams, control schematics, riser diagrams, equipment manuals and installation specifications to determine device locations and wiring routes
Perform point-to-point wiring verification, continuity checks and loop testing on installed circuits using appropriate electrical and electronic testing equipment prior to energizing
Install and terminate BACnet MS/TP and BACnet/IP field bus connections and verify physical network continuity and termination
Retrofit and replace obsolete controllers, sensors and field devices on existing systems, including safe removal and disposal of legacy control equipment
Coordinate installation activities with licensed electrical contractors, mechanical trades, site staff and project teams, and identify scope requiring regulated electrical installation or modification work
Identify defective or damaged control components during installation and replace, adjust or recommend replacement as required
Perform preventive maintenance, physical inspection and hardware replacement on installed BAS field equipment
Support the commissioning team by confirming installed points respond correctly and by correcting wiring, mounting and termination deficiencies identified during start-up
Complete installation records, as-built drawing markups, point-to-point checkout sheets, material and equipment lists, deficiency corrections and work orders
What You Bring
College diploma or university degree in an engineering or technical field related to electrical systems, electronics, automation, instrumentation or building controls
2–3 years of hands-on installation experience with building automation, HVAC controls, low-voltage systems or electrical field work
Ability to read and interpret electrical drawings, wiring diagrams and control schematics
Experience with low-voltage wiring, terminations and field device installation
Comfort working at heights, on ladders, and in mechanical rooms and confined spaces
WHMIS 2015 certification; Working at Heights (or willingness to obtain)
Valid Ontario driver's licence and own transportation
Certificate of Qualification (309A) is considered an asset
What We Offer
$37.00 per hour, 40 hours per week
Mileage reimbursement, on-site parking, paid time off
Tools and equipment provided
Varied installation and retrofit work across boilers, chillers, air handling and make-up air systems
We welcome applications from all qualified candidates, including newcomers to Canada, youth and recent graduates, Indigenous applicants, persons with disabilities, and mature workers.
To apply: [email protected]
Please mention you saw this at GoodWork.ca.
Journal
Only you can see this. Kept on this device, and in your account when you sign in.