Body Technician- Commercial

Fleet Street is a specialized commercial collision and repair facility focused on keeping vehicles and businesses moving. Built to support fleet operators, Fleet Street delivers fast, reliable collision, glass, and mechanical repairs designed to minimize downtime and get vehicles safely back on the road. Backed by experienced technicians, advanced equipment, and streamlined repair processes, the team is driven by efficiency, accountability, and quality workmanship. As demand for commercial fleet services evolves, Fleet Street continues to grow a skilled workforce committed to safety, speed, and doing the job right.

Position Title: Body Technician

Position reports to: Location Manager

Position Summary: The apprenticeship program at Kirmac includes 4 distinct levels of development and experience, eventually leading to an individual earning his/her Red Seal Certification as an Autobody Technician. Each position level focuses on the various stages of Kirmac’s Accelerated Repair System (KARS). A willingness to learn and develop the necessary skills required for efficient and quality repairs are a key requirement for success in this role.

Key Responsibilities and Accountabilities:

Level 1 - activities include:

1. Damage Analysis System (DA) – Ability to perform the following activities:

1. Understanding and following the mapping on repairs
2. Maintaining a clean parts cart & tagging it with an RO#.
3. Bagging & tagging all parts, hardware and fasteners during disassembly.
4. Disassembly of parts from Domestic, Import and European vehicles to assist the repair and paint process.
5. Identifying and mapping visible and hidden damage during disassembly.
6. Efficiently remove and install parts and hardware on all types of vehicles.

1. Glass – activities include:

1. Repairing Rock Chips.
2. Replacement of ”bolt-in” glass on all types of vehicles

1. Panel Replacement – activities include the ability, efficiency and quality of the following:

1. New and recycled door replacement
2. Trunk, hatch and tailgate replacement
3. Fender replacement
4. Hood replacement
5. Bumper replacement
6. Bolt-on radiator support replacement
7. Test fitting parts prior to paint

1. Sheet Metal Repair – activities include:

1. Performing sheet metal repairs < 4 Hours.

1. Mechanical – activities include:

1. 1. A/C discharge & recharge
   2. A/C condenser replacement
   3. Radiator replacement
   4. Replacement of miscellaneous mechanical parts commonly damaged in collisions (air intake, exhaust/muffler, electrical pigtails)

1. Quality Control – activities include:

1. Ensuring each stage of the repair is completed to Kirmac’s standards for quality.
2. Completing the Quality Checklist after each repair stage.

1. Other – activities and abilities include:

1. Ability to use & understand a work order.
2. Understanding the advantages and disadvantage of Repair Vs. Replace.
3. Ability to solve problems before asking for assistance.

Level 2 – In addition to successfully performing Level 1 activities, Level 2 activities include:

1. Sheet Metal Repair – Ability to perform the following activities:

1. Perform sheet metal repair of 4-8 hours.

1. Structural Repair – Ability to perform the following activities:

1. Ability to use pulling equipment (Car-O-Liner, Wedge Clamp, etc).
2. Frame repair of < 4 Hours

1. Panel Replacement – activities include the ability, efficiency and quality of the following:

1. Door skin replacement
2. End panel replacement

1. Mechanical – activities include the ability, efficiency and quality of the following:

1. Front suspension components and assemble replacement
2. Rear suspension components and assemble replacement
3. Axle shaft replacement

Level 3 – In addition to successfully performing activities identified under Levels 1 & 2, Level 3 activities include:

1. Sheet Metal Repair – Ability to perform the following activities:

1. Sheet Metal Repair of 8-12 Hours

1. Structural Repair – Ability to perform the following activities:

1. Understand and use a 3D measuring system and vehicle specs (Car-O-Liner, Wedge Clamp, etc) to assist with repairs
2. Frame repair of 4-8 Hours

1. Panel Replacement – activities include the ability, efficiency and quality of repairing / replacing the following:

1. "B" pillar / Center post
2. "C" Pillar / Dog leg
3. Rocker panel
4. Welded radiator support

Level 4 – In addition to successfully performing activities identified under Levels 1, 2 & 3, Level 4 activities include:

1. Aluminum & Sheet Metal Repair – Ability to perform the following activities:

1. Sheet Metal Repair of 12+ Hours
2. Aluminum repair (select locations)

1. Structural Repair – Ability to perform the following activities:

1. Frame repair greater than 8 hours

1. Panel Replacement – activities include the ability, efficiency and Quality of repairing / replacing the following:

1. "A" pillar / Hinge pillar
2. Quarter panel replacement
3. Roof skin
4. Rear floor section

Red Seal Certification – Successful completion of the Inter-provincial Red Seal program and achieving a designation as a Motor Vehicle Body Repairer.

Qualifications:

• Eligible to work in Canada.
• Valid Canadian driver’s license.

• Red Seal Certification – Motor Vehicle Repair required.
• Minimum 4 years of experience in an automotive collision repair industry.
• Competency on colour matching is required.

• Thoroughness in accomplishing a task through concern for all areas involved, situation and/or work-related problem as a means of achieving optimal efficiency and effectiveness in performing job duties.

• Ability to provide leadership by fostering learning or development of others based on operation needs and future objectives.

• Proven ability to work effectively with diverse personalities in a tactful, decisive, and resourceful manner.
• Capability to achieve efficient, timely, quality results by directing efforts on expected outcomes while providing exemplary client service within expected timeframes.

Working Conditions:

• Works indoors and outdoors.
• Will work near moving mechanical parts.
• Required to wear PPE occasionally such as respiratory equipment, steel toe boots, gloves & protective eyewear.
• Standing for prolonged periods of time.
• Occasional and indirect exposure to hazardous materials while walking the shop grounds.
• Required to drive customer cars when moving them around the shop.
• Intermittent exposure to loud noises when in the shop.

Physical Requirements:

• Ability to safely and successfully perform essential job functions outlined above, including meeting qualitative and/or quantitative productivity standards.

• Ability to lift 30 – 75 lbs.

Direct Reports:

• Indirect report: Body Apprentices

We want people who want to have an impact.

Kirmac is building an inclusive company culture where anyone, regardless of age, race, gender, sexual orientation, or disability, is recognized and rewarded for their contributions. Our Learning & Development Program allows every team member to learn new skills and expand their expertise. If you want to work someplace where you can grow, and your ideas can have an impact, we want to hear from you!

Ready to make an impact? Apply with your resume today!

We thank all applicants for their interest, however, only those selected for an interview will be contacted.