Apply now

Posted 23 days ago

Process Engineer (pre-FEED/FEED)

@ PSL

Airdrie, Alberta

Full-time5+ years experience
Apply now
SIGNALS

Overview

PSL is hiring a Process Engineer (pre-FEED/FEED) on a full-time basis, with contract or employee arrangements both under consideration. The role covers heavy oil projects for domestic and international clients, from FEED studies to turnkey EPFC projects, with travel for startup and commissioning and mentoring of junior engineers. A P.Eng. registered with APEGA (or eligible) and 5+ years of heavy oil processing experience are required.

Responsibilities:

  • Lead heavy oil process projects from FEED to turnkey EPFC
  • Mentor and check work of junior engineers
  • Coordinate with multidisciplinary engineering and design teams
  • Oversee fabrication and assembly in Airdrie facility
  • Support startup and commissioning, including travel

Requirements summary:

  • Bachelor's in chemical engineering from an accredited university
  • P.Eng. registered or eligible with APEGA
  • 5+ years heavy oil processing, including SAGD and water treating
  • Experience with HYSYS and other process simulation software
  • Strong communication skills
  • EPC or fabricator experience is an asset

Tools & skills

Source and dates

Employer career site / ATS feed · ultipro

Employer posting date
2026-10-14
First seen by our source
2026-10-14
Source record updated
2026-10-14

These dates describe the source record, not a live verification that the employer is still hiring. Check the original posting.

Job details

SenioritySenior
DepartmentEngineering
Experience5+ years
Hours per week40 (estimated)
Travelair: moderate
Work settingOffice, Plant or factory, Client sites
PositionSitting and standing
Physical demandsphysical low · computer high
LanguagesEnglish
Licences & certificationsProfessional Engineer (P.Eng.) registered with APEGA
EducationBachelor’s degree (required)
Fields of studyChemical engineering

Summary and details written by AI from the posting; the employer’s posting is the authority.

FieldValue
HeadquartersParis
Open jobs on Jobsy72
Job description

This position is open for consideration of contract or an employee position
• Work on a variety of heavy oil projects for domestic and international clients. The scope of the projects will vary
from FEED studies, modular packages and full turnkey EPFC projects.
• Acquire in-depth technical expertise in heavy oil processing
• Lead and mentor junior engineers, including delegation, checking, and authentication of professional work products.
• Become a critical decision maker while working with a multidisciplinary team of engineering and design leads
• Develop and build relationships with clients
• Gain practical experience by overseeing the fabrication and assembly of your projects in the Propak, Airdrie
facilities.
• Travel domestically and internationally for startup and commissioning support
• Receive mentorship from senior process engineers, supervisors, and managers to support your technical
development and role as a lead process engineer

Qualifications:
• Bachelor’s degree in chemical engineering from an accredited university
• Professional Engineer registered and in good standing with Alberta Professional Engineers, and Geoscientists of
Alberta (APEGA) or eligible for membership.
• 5+ years of experience in heavy oil processing with specific experience in SAGD, wellpads, and water treating
required.
• Experience designing alternative processes in Glycol Dehydration, Sweetening, Mechanical Refrigeration, Oil
Processing, Oil Refining and Compression is considered an asset.
• EPC and/or Fabricator experience
• Excellent communications skills required to interact with client and internal team members
• Experience working with HYSYS and other engineering software (BR&E ProMax, VMGSim Symmetry, Flarenet)
• Experience in sizing process equipment is an asset (separators, treaters, FWKO, heat exchangers, PSVs, flare
systems, control valves, pumps, reciprocating, rotary screw, and centrifugal compressors)
• Experience with typical process deliverables (PFD, HMB, P&ID, Line List, Design Basis Memorandum, Cause &
Effect Diagrams, Control Narratives, Datasheets, Hydraulics, Line Sizing)

Keywords: Modular or Modularization Acid Gas Amine Ariel Distributor Brazed Aluminum Heat Exchanger (BAHX) Bryan Research and Engineering (BRE or BR&E) Cause and Effect Diagram or “Shutdown Key” (C&E, SDK) Centrifugal Compressor Centrifugal Pump Contract Control Narrative Controls Cryogenic Deep cut Dehydration Dewpoint Direct Fired Heater Efficiency Engineering, Procurement, and Construction (EPC EPF EPFC) Engineers and Geoscientists of British Columbia (EGBC) Ethane Exchanger Design and Rating Expander-Compressor Fabricator Flare Flarenet Fractionation or Distillation Gas Subcooled Process (GSP) Heat Medium Heat recovery Hot Oil hydrocarbon Hydrogen Sulphide or Sulfide HYSYS International Joule-Thomson (J-T JT) Liquified Petroleum Gas (LPG) Manufacturing Methane Molecular Sieve Natural Gas Liquids (NGL) Natural Gas Processing Oil & Gas Oilfield Equipment Original Equipment Manufacturer (OEM) Plate Fin Heat Exchanger Pressure Relief System Pressure Safety Valve (PSV) Pressure Vessel Process Engineering Process Intensification Process Optimization Process Selection Professional Engineer (P.Eng.) ProMax Propane Recovery Reciprocating Compressor Recycle Split Vapor (RVS) Salary Seperator Shell and Tube Heat Exchanger Single Column Overhead Recycle Start-up and Commissioning Sweetening the Association of Professional Engineers and Geoscientists of Alberta (APEGA) Treating Tri ethylene Glycol (TEG) Troubleshoot Turbo-Expander UltraTEF Utilities VMGSim or Symmetry Y Grade Turnkey or Turn-Key Control Valve Filtration Process Flow Diagram (PFD) Mechanical Flowsheet (MFS) Process and Instrument Diagram (P&ID) Material Selection Diagram (MSD) Heat and Material Balance or Mass Balance (H&MB or HMB) Design Basis Memorandum Datasheets API-521 API-520 ASME B31.3 API-610, API-682 Stream Assisted Gravity Drainage (SAGD) Central Processing Facility Greenfield Brownfield Quotation (RFQ) Cost Estimate Lead Column or Tower Mass Transfer

Similar jobs

  • Process Engineer

    Medicine Hat, AB
    Full Time

    CF Chemicals LTD

    5+ YOECandidates need a Bachelor's in Chemical Engineering, eligibility for P.Eng registration with APEGA, and 5 to 10 years of process engineering experience. Skills in Aspen HYSYS or Aspen Plus, knowledge of API and ASME codes, and strong troubleshooting and communication are needed.

    Aspen HYSYS, Aspen Plus, Aspen EDR

  • Senior Process Engineer, Advanced Fuels and Chemicals

    Calgary, AB

    BBA

    BBA needs a senior engineer with process engineering experience in oil and gas, advanced fuels or chemicals, and proven skill in client-facing business development. Candidates should be able to lead multidisciplinary projects and run hazard studies.

    Process simulation software

  • Senior Process Engineer - Uranium Processing Specialist

    Saskatoon, SK +3
    $157k–$192k/yrHybridFull Time

    Wood

    15+ YOECandidates need a metallurgical or chemical engineering degree, at least 15 years in mineral processing or hydrometallurgy including 10 years on uranium projects in consulting, and P.Eng. registration or eligibility in Canada. Strong communication, modelling software skills and lawful work authorization in Canada are also required.

    METSIM, SysCAD, AspenPlus

  • Process Engineer

    Calgary, AB
    On-siteFull Time

    Bantrel Co.: Bantrel is an engineering, procurement, construction and construction management (EPCM) services company.

    5+ YOECandidates need a chemical engineering degree or equivalent, P.Eng. registration or eligibility with APEGA, and 5 to 9 years of process design experience. Strong written and verbal communication skills and teamwork on multidisciplinary projects are also required.

    Process engineering, Design process, Communication skills, Work independently, Emission standards, Chemical engineering

    Senior Process Engineer

    Calgary, AB
    On-siteFull Time

    Bantrel Co.: Bantrel is an engineering, procurement, construction and construction management (EPCM) services company.

    10+ YOECandidates need a Chemical Engineering degree or equivalent, a P.Eng. registration with APEGA, and 10 to 15 years of progressive engineering experience in industrial process plants. Strong communication skills for working with internal teams and external clients are also required.

    P&ID, pumps, compressors, flare systems, heat exchangers, distillation columns

  • Intermediate Process Engineer

    Calgary, AB
    $43–$59/hrFull Time

    Kent

    7+ YOECandidates need a Bachelor's degree in chemical or process engineering, P.Eng. registration with APEGA or PEO, and relevant process engineering experience on industrial or energy projects. Strong skills in process simulation, calculations, and written and oral English are also needed.

    Aspen HYSYS, Aspen Plus

    Senior Process Engineer

    Calgary, AB
    Full Time

    Kent

    12+ YOECandidates need a Bachelor's degree in chemical or process engineering, APEGA Professional Engineer registration and significant process experience on industrial or energy projects. Strong skills in process simulation, process safety reviews and clear English communication are also required.

    Aspen HYSYS, Aspen Plus

  • Process Engineer

    Calgary, AB

    Colas

    10+ YOECandidates need a chemical engineering degree, a P.Eng, and 10-15 years of oil and gas experience. Strong process design, equipment sizing, project management and communication skills are required.

    Microsoft Project, Microsoft Excel, Microsoft Word, Microsoft Access, AutoCAD

Locations & environments

Locations

All of CanadaRemote · Hybrid · On-site · Field

Pro tip: add remote jobs to widen your search.

Exclude locations

Workplace type

Company jobs in these results

These are this company’s jobs loaded in your current search. The company may have more openings.