“Perform live” jobs in Canada – Page 4

No matching filters. Try another name.

Results

• 2h

  Substation Engineering Consultant 2 - Grid

  Ontario

  Full Time

  

  Sargent & Lundy: Founded in 1891, the firm is a global leader in power, energy, and decarbonization with expertise in grid modernization, renewable energy, energy…

  10+ YOECandidates need an engineering degree, 10 or more years of high voltage utility design or management experience, and knowledge of NEC, NESC, NEMA, IEC, IEEE and ANSI standards. Strong written and verbal communication and proposal-writing experience are required, and a P.Eng or PE and PMP are valued.

  2h

  Lead Substation Engineer 1 - Grid

  Ontario

  Full Time

  

  Sargent & Lundy: Founded in 1891, the firm is a global leader in power, energy, and decarbonization with expertise in grid modernization, renewable energy, energy…

  10+ YOECandidates need a Bachelor of Science in Engineering and 10 or more years of high voltage substation protection and control experience. A PE or P.Eng licence, relay design software skills and strong written and verbal communication are required.

  SKM, ETAP, ASPEN, CDEGS, SEL, ABB

  2h

  Senior Substation Electrical Engineer 1 - Grid

  Ontario

  Full Time

  

  Sargent & Lundy: Founded in 1891, the firm is a global leader in power, energy, and decarbonization with expertise in grid modernization, renewable energy, energy…

  5+ YOECandidates need a Bachelor of Science in Engineering and 5 or more years designing medium voltage power systems. Strong project tracking, communication, drawing review and MS Office skills are required, and a PE or P.Eng licence is preferred.

  AutoCAD, MS Office

  2h

  Transmission Line Engineer 2 - Grid

  Ontario

  Full Time

  

  Sargent & Lundy: Founded in 1891, the firm is a global leader in power, energy, and decarbonization with expertise in grid modernization, renewable energy, energy…

  1+ YOECandidates need a degree from a CEAB-accredited program or a US ABET-accredited program, plus at least one year of transmission line experience. Proficiency with PLS-CADD and PLS-POLE and strong written and verbal communication are required.

  PLS-CADD, PLS-POLE, MS Office, AutoCAD, Microstation, ArcGIS

• 3h

  Electrical Engineer, Senior/Intermediate - Solar & BESS

  Mississauga, ON +4

  

  Tetra Tech: With 25,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science® to address the entire water…

  7+ YOECandidates need a Bachelor's in Electrical Engineering, 7+ years of power or renewable energy experience, and strong knowledge of solar PV, BESS, substations, and protection systems. A P.Eng. or PE designation (or eligibility for it) and proficiency with ETAP, CYME, PVsyst and related tools are required.

  ETAP, CYME, PVsyst, PVCase, AutoCAD, Revit

  3h

  Intermediate Mechanical Engineer - Hydro

  Vancouver, BC +4

  

  Tetra Tech: With 25,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science® to address the entire water…

  6+ YOECandidates need a mechanical engineering degree and a P.Eng. in Canada, plus about 6 to 10 years of progressive engineering experience. Hydropower or water resources project experience with turbines, penstocks, gates and hydraulic steel structures is required, along with knowledge of CSA and ASME codes.

  Procurement, Mechanical systems, Mechanical engineering, Documentation, Design principles, Inspection

  3h

  Electrical Designer

  Mississauga, ON +4

  

  Tetra Tech: With 25,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science® to address the entire water…

  3+ YOECandidates need a diploma from an accredited electrical, civil or mechanical technology program with OACETT certification and at least 3 years of design or drafting experience. Proficiency in AutoCAD or Microstation and knowledge of the Canadian Safety Code are required.

  AutoCAD, Microstation, MS Office Suite

  3h

  Civil Designer

  Mississauga, ON +4

  

  Tetra Tech: With 25,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science® to address the entire water…

  3+ YOECandidates need a diploma in civil engineering technology, at least 3 years of design or drafting experience, and experience with civil design. The Certified Engineering Technologist designation is preferred, along with strong problem-solving and communication skills.

  Health and safety, Civil engineering, C.E.T., Problem solving, Communication skills, Technical writing

  3h

  Civil Technologist

  Mississauga, ON +4

  

  Tetra Tech: With 25,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science® to address the entire water…

  3+ YOECandidates need a diploma in civil engineering technology and at least 3 years of design or drafting experience in consulting or energy. The Certified Engineering Technologist (CET) designation is preferred, along with strong attention to detail, problem-solving and communication skills.

  Health and safety, Civil engineering, C.E.T., Problem solving, Communication skills, Technical writing

  3h

  Senior Structural Technologist

  Mississauga, ON +4

  

  Tetra Tech: With 25,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science® to address the entire water…

  10+ YOECandidates need a diploma in civil or structural engineering technology and 10+ years of structural design experience in power, hydro, energy or industrial sectors. Strong skills in AutoCAD, Civil 3D and Revit, project leadership and clear communication are required; CET designation is preferred.

  AutoCAD, Civil 3D, Revit

  3h

  Structural Designer

  Mississauga, ON +4

  

  Tetra Tech: With 25,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science® to address the entire water…

  3+ YOECandidates need a diploma in civil or structural engineering technology and at least 3 years of design or drafting experience in consulting or energy. A CET designation is preferred, along with strong communication and problem-solving skills.

  Structural engineering, Design drawings, Health and safety, C.E.T., Problem solving, Communication skills

  3h

  Senior Project Controller

  Mississauga, ON +4

  

  Tetra Tech: With 25,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science® to address the entire water…

  10+ YOECandidates need a university degree in finance, mathematics, accounting or engineering, or equivalent experience, plus 10+ years in project controls. They must be advanced in MS Project, Primavera P6, Excel and Access, and work well with multidisciplinary teams.

  MS Project, Primavera P6, MS Access, Excel, Word

  3h

  Structural Technologist

  Mississauga, ON +4

  

  Tetra Tech: With 25,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science® to address the entire water…

  3+ YOECandidates need a diploma in civil or structural engineering technology and at least 3 years of design or drafting experience in consulting or energy. The CET designation is preferred, along with strong attention to detail, problem-solving and clear communication.

  Structural engineering, Design drawings, Health and safety, C.E.T., Problem solving, Communication skills

  3h

  Intermediate / Senior Project Engineer - Hydro

  Mississauga, ON +4

  

  Tetra Tech: With 25,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science® to address the entire water…

  7+ YOECandidates need a bachelor's engineering degree, a P.Eng. or eligibility to register, and about 7 years of progressive experience, ideally in hydropower, dams or water resources. They also need strong coordination, tendering and communication skills.

  Procurement, Documentation, Change management, Health and safety, P.Eng., Quality assurance procedures

  3h

  Structural Engineer

  Calgary, AB +4

  

  Tetra Tech: With 25,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science® to address the entire water…

  1+ YOECandidates need 1-6 years of structural engineering experience, including steel and foundation design for substations, transmission lines and industrial buildings, plus a bachelor's degree in civil or structural engineering. Strong design software skills and attention to detail are required.

  AutoCAD, MathCAD, STAAD, S-Frame, RISA, LPILE

  3h

  Senior P&C Engineer

  Mississauga, ON +4

  

  Tetra Tech: With 25,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science® to address the entire water…

  4+ YOECandidates need a bachelor's or master's in electrical engineering, a P.Eng. or PE registration, and 4+ years of protection and control experience on transmission, distribution, HVDC or renewable projects. Strong knowledge of protective relays, SCADA, IEC 61850 and SEL, GE or Siemens relays is required.

  ETAP, ASPEN, CYME, EasyPower, SKM, PSCAD

  3h

  Senior Structural Engineer

  Mississauga, ON +4

  

  Tetra Tech: With 25,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science® to address the entire water…

  10+ YOECandidates need 10+ years of structural engineering experience in steel and foundation design for power and industrial projects, a civil or structural bachelor's degree and a Canadian P.Eng. licence. Strong leadership, communication, and analysis skills and proficiency with structural analysis and transmission design software are also needed.

  AutoCAD, MathCAD, MS Office, STAAD, SFrame, RISA

  3h

  Senior Civil Engineer (Hydro)

  Calgary, AB +4

  

  Tetra Tech: With 25,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science® to address the entire water…

  6+ YOECandidates need a Civil Engineering bachelor's degree, Professional Engineer registration in Canada or the US, and 6+ years of consulting engineering experience. Strong hydrotechnical, modeling and communication skills are also required.

  Hydrotechnical modeling software, Microsoft 365, Microsoft Teams, SharePoint, Excel

  3h

  Senior Electrical Engineer

  Mississauga, ON +4

  

  Tetra Tech: With 25,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science® to address the entire water…

  10+ YOECandidates need a university degree in Electrical Engineering, over 10 years of electrical engineering experience, and strong knowledge of utility substation and distribution design. A Professional Engineer registration in Canada or the United States is preferred, along with experience in renewable energy, HVDC and 3D design software.

  3D design software

  3h

  Intermediate Mechanical Engineer - Hydro

  Mississauga, ON +4

  

  Tetra Tech: With 25,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science® to address the entire water…

  6+ YOECandidates need a mechanical engineering degree and a P.Eng. in Canada, plus about 6 to 10 years of progressive engineering experience. Hydropower or water resources project experience with turbines, penstocks, gates and hydraulic steel structures is required, along with knowledge of CSA and ASME codes.

  Procurement, Mechanical systems, Mechanical engineering, Documentation, Design principles, Inspection

  3h

  Senior Substation Engineer

  Mississauga, ON +4

  

  Tetra Tech: With 25,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science® to address the entire water…

  12+ YOECandidates need a university degree in electrical engineering, over 12 years of substation and medium and high voltage design experience, and a registered Professional Engineer licence in the US or Canada. Strong communication skills and experience with protection, control and metering systems are required.

  3D design software

  3h

  Structural Engineer (Subject Matter Expert)

  Mississauga, ON +4

  

  Tetra Tech: With 25,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science® to address the entire water…

  20+ YOECandidates need a civil engineering degree with a structural specialization, a P.Eng. or PE licence, and at least 20 years of progressive structural experience, ideally in consulting. Strong expertise in power infrastructure design, codes such as CSA, AISC, ACI and ASCE, and structural analysis software is required.

  STAAD.Pro, RISA, SAP2000, PLS-TOWER, LPile, MFAD

  3h

  Senior Civil Technologist

  Mississauga, ON +4

  

  Tetra Tech: With 25,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science® to address the entire water…

  10+ YOECandidates need a civil engineering technology diploma and 10+ years of civil design experience in power, hydro, energy or industrial work. Strong skills in AutoCAD, Civil 3D and Revit, plus leadership and clear communication, are required. CET designation is preferred.

  AutoCAD, Civil 3D, Revit

  3h

  Intermediate / Senior Project Engineer - Hydro

  Vancouver, BC +4

  

  Tetra Tech: With 25,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science® to address the entire water…

  7+ YOECandidates need a bachelor's engineering degree, a P.Eng. or eligibility to register, and about 7 years of progressive experience, ideally in hydropower, dams or water resources. They also need strong coordination, tendering and communication skills.

  Procurement, Documentation, Change management, Health and safety, P.Eng., Quality assurance procedures

2 companies