“Manufacturing simulation tools” jobs in Canada – Page 13

No matching filters. Try another name.

Results

• 29d

  Configuration Specialist, Bombardier Experimental

  Quebec

  

  Bombardier: Headquartered in Greater Montréal, Québec, Bombardier operates aerostructure, assembly and completion facilities in Canada, the United States and…

  10+ YOECandidates need a university or technical degree, at least ten years of aerospace configuration management experience, and knowledge of aerospace regulations and ground test rigs. Bilingual French and English communication, advanced Microsoft Office skills, and eligibility for the Canadian Controlled Goods Program are also required.

  Microsoft Excel, Microsoft PowerPoint, Product databases

  29d

  Intern, Stress Engineering - Final Assembly Line (Winter 2027)

  Mississauga, ON

  $17.95–$31/hr

  

  Bombardier: Headquartered in Greater Montréal, Québec, Bombardier operates aerostructure, assembly and completion facilities in Canada, the United States and…

  Bombardier needs current students with an engineering background who can support stress analysis and FEA work. Candidates should be comfortable with stress analysis software such as NASTRAN or HyperWorks.

  NASTRAN

  29d

  Professional Sr, Engineering Electromagnetic Compatibility (EMC)

  Dorval, QC

  

  Bombardier: Headquartered in Greater Montréal, Québec, Bombardier operates aerostructure, assembly and completion facilities in Canada, the United States and…

  8+ YOECandidates need a degree in electrical engineering, engineering sciences or physics and at least eight years of EMC experience. Bombardier also requires four years of aerospace system certification work and knowledge of RTCA/DO-160 and airworthiness rules.

  electromagnetic simulation tools

  29d

  Professional Senior Engineering, Electromagnetic Compatibility (EMC)

  Dorval, QC

  

  Bombardier: Headquartered in Greater Montréal, Québec, Bombardier operates aerostructure, assembly and completion facilities in Canada, the United States and…

  8+ YOECandidates need a degree in electrical engineering, engineering sciences or physics, at least eight years of EMC experience and four years of aerospace EMC certification work. Knowledge of RTCA/DO-160, SAE ARPs and aviation regulations is required, and French is an asset.

  electromagnetic simulation tools

• 29d

  Firmware Engineer – SerDes PHY (all levels)

  Toronto, ON

  On-site

  QC

  Qualcomm Canada ULC

  6+ YOECandidates need an engineering or computer science degree and 4 to 6+ years of software engineering experience, depending on degree level. They also need at least 3 years of programming experience in languages such as C, C++, Java or Python.

  JTAG debuggers, git, Verilog, SystemVerilog

• 29d

  Mechanical Calculation - Crash Engineer

  Saint-Bruno, QC

  

  Alstom

  Candidates need a master's degree in mechanical engineering or equivalent, with structural design or mechanical analysis focus. Strong finite element analysis skills with tools like Altair HyperWorks or ANSYS, plus French and professional English, are required.

  Altair HyperWorks, ANSYS

• 29d

  Air System Integrator

  Montréal, QC

  

  Capgemini

  5+ YOECandidates need a bachelor's in aerospace, mechanical engineering or a related field, plus 5+ years of aeronautical systems engineering or integration experience. Knowledge of aerospace standards, certification practices and requirements management tools is needed.

  CAD, simulation tools, requirements management tools, systems modeling tools, configuration management tools

• 29d

  Senior Power Electronics Engineer

  Vancouver, BC

  $125k–$155k/yrFull Time

  

  Delta-Q Technologies

  10+ YOECandidates need an electrical engineering education and 10 years of hands-on power electronics experience with commercially released products. They must know converter topologies, control loop stability, power semiconductors, magnetics and EMI/EMC requirements.

  LTspice, PLECS, PSIM, MATLAB, Simulink

• 29d

  Manufacturing Engineer

  Burnaby, BC

  Full Time

  

  Panelmatic

  3+ YOECandidates need a bachelor's degree in an engineering field and 3 to 7 years of experience in switchgear, electrical or industrial equipment manufacturing. Lean or Six Sigma knowledge, CAD skills, strong communication and familiarity with ISO 9001, CSA or UL standards are required.

  CAD software, Manufacturing simulation tools

• 29d

  Hardware Engineering Co-op

  Concord, ON

  Full Time

  D

  Danaher

  Candidates need to be students working toward a BS in Mechanical, Electrical or Systems engineering with a minimum GPA of 3.0. Previous co-op experience, medical device or product development experience, and CAD skills such as SolidWorks are an asset.

  SolidWorks

• 29d

  Analog/mixed-signal IC Developer - Acacia (Hybrid)

  Kanata, ON +1

  Full Time

  

  Cisco

  8+ YOECandidates need a bachelor's with 8 years, a master's with 6, or a PhD with 3 years of related experience, plus hands-on design, simulation and measurement of high-speed ICs in at least three areas such as SerDes, PLLs, output drivers, clock distribution, amplifiers and equalization.

  Cadence Virtuoso, Spectre, Calibre, EMX, Matlab

  29d

  Senior Mixed-Signal Designer - Acacia (Hybrid)

  Kanata, ON

  Full Time

  

  Cisco

  5+ YOECandidates need a degree plus 5 to 12 years of related experience, depending on the degree level, and experience designing, simulating and measuring high-speed ICs across at least three of: SerDes, output drivers, PLLs, clock distribution, op-amps/PGAs or equalization. Experience with FinFET, layout and design tools is preferred.

  Cadence Virtuoso, Spectre/APS/SpectreX, Calibre, EMX, Matlab

  29d

  Principal Analog/mixed-signal IC Developer - Acacia (Hybrid)

  Kanata, ON

  Full Time

  

  Cisco

  7+ YOECandidates need a Bachelor's with 15 years, a Master's with 10 years, or a PhD with 7 years of related experience. They must have high-speed IC design experience in at least three areas and have led a high-performance circuit team.

  Cadence Virtuoso, Calibre, EMX, Matlab

  29d

  Senior Analog/mixed-signal IC Designer - Acacia (Hybrid)

  Kanata, ON

  Full Time

  

  Cisco

  12+ YOECisco candidates need 12+ years of experience with a BSEE, 8+ with an MS, or 5+ with a PhD. Experience in high-speed IC design in at least three areas such as SerDes, PLLs, output drivers, equalization and amplifiers is required.

  Cadence Virtuoso, Spectre, Calibre, EMX, Matlab

  29d

  Senior Analog/mixed-signal IC Developer - Acacia - (Hybrid)

  Kanata, ON +1

  Full Time

  

  Cisco

  12+ YOECandidates need a BSEE with 12+ years of experience, or an equivalent MS or PhD background, plus hands-on design, simulation and measurement of high-speed ICs in at least three areas such as serial links, PLLs, drivers and data converters. Experience with FinFET technology, high-speed layout and Cadence Virtuoso is a plus.

  Cadence Virtuoso, Spectre, SpectreX, APS, Matlab, EMX

• 29d

  Senior Electrical Engineer

  Oakville, ON

  $110k–$140k/yrFull Time

  

  VitalBio

  10+ YOECandidates need an electrical engineering degree with 10+ years of experience (or a master's with 8+ years), strong PCB design skills in Altium Designer, and knowledge of power, signal integrity and EMC. Hands-on experience bringing compliance-tested hardware to market is also required.

  Altium Designer, Oscilloscope, Function generator, DC power supply

• 29d

  Software Manager, MachineLogic / Gestionnaire, génie logiciel (MachineLogic)

  Montréal, QC

  Full Time

  

  Vention

  8+ YOE2+ Mgmt8+ années d'expérience en développement logiciel; 2+ années en gestion ou leadership technique d'une équipe; Expérience avec les systèmes basés sur les LLM ou agents

  Python, TypeScript, MachineMotion, Fanuc CRX

  29d

  VP Product — Software Platform / VP Produit — Plateforme Logicielle

  Montréal, QC

  Full Time

  

  Vention

  12+ YOE12 ans et plus d'expérience en leadership produit ou technologique; Gestion de plusieurs équipes produit; Solide compréhension de l'architecture logicielle, des API et des systèmes embarqués

  Robotics, Embedded systems, Lead a team, Procurement, Leadership, Prioritization

  29d

  Physical AI Research Scientist / Chercheur(-euse) scientifique - IA physique

  Montréal, QC

  Full Time

  

  Vention

  Master's or PhD, or equivalent industry experience, in CS, robotics or ML; Deep expertise in learning from demonstration or reinforcement learning; Hands-on deployment of learned policies on physical robotic arms

  MuJoCo, Isaac Sim, robotic arm

  29d

  Account Executive / Chargé(e) de comptes

  Montréal, QC

  Full Time

  

  Vention

  2+ YOE2 ans et plus d'expérience en vente B2B complexe; Expérience en automatisation industrielle, robotique ou technologie; Capacité de découverte consultative et de présentation

  Salesforce, ZoomInfo, Salesloft, 3D MachineBuilder, MachineLogic

• 29d

  Robotics Technician

  Barrie, ON

  

  JENOPTIK AG

  5+ YOECandidates need a college diploma in robotics or a related field, or equivalent industry experience, plus working knowledge of robot programming and AutoCAD and SolidWorks. Senior candidates need 8+ years of practical experience and knowledge of PLCs, networks and safety standards.

  Fanuc, ABB, Motoman, Nachi, Panasonic, Kuka

• 29d

  Senior Process Engineer

  Vancouver, BC

  FM

  Freeport McMoRan: (FCX) is a leading international metals company with headquarters in Phoenix, Arizona.

  5+ YOEFreeport McMoRan needs candidates with a chemical, metallurgical or process engineering degree and at least 5 years of mineral processing or capital project experience, or a master's degree with 3 years. A P.Eng. or PE is preferred, along with process simulation experience.

  METSIM, HSC, JKSimMet, JKSimFloat

• 29d

  ASIC Verification Engineer (7745)

  Ottawa, ON

  T

  TSMC

  5+ YOECandidates need a master's or PhD in electrical or computer engineering and 5-10 years of digital verification experience. They should be strong in SystemVerilog, UVM, assertions, Unix/Linux and EDA tools such as VCS or Incisive.

  Synopsys VCS, Cadence Incisive, UVM, Unix/Linux

• 29d

  Senior Traction Power Engineering Manager

  Mississauga, ON

  H

  Hatch

  10+ YOECandidates need a Bachelor's or Master's in electrical engineering or a related discipline, a Professional Engineer licence or the ability to get one within 6 months, and ten years in rail electrification with three in Canada. Hatch also requires DC and AC traction power design experience, both third rail and overhead catenary, and five years of multidisciplinary project experience.

  AutoCAD, MicroStation, Civil 3D, Revit

14 companies