“Flight Operations Manual” jobs in Canada – Page 14

No matching filters. Try another name.

Results

• 1mo

  Licensed AME E (ACA) – B737 / ATR

  Yellowknife, NT

  $38.52–$53.29/hrFull Time

  

  Canadian North: Canadian North is also the premier provider of air charter services for large resource sector clients requiring dependable, efficient and economical…

  4+ YOECandidates need a valid Transport Canada AME E licence, an approved aircraft maintenance engineering diploma, and at least 4 years of relevant maintenance experience. They also need a Canadian driver's licence, an AVOP with D/DA rating, and a Restricted Area Identity Card.

  Aircraft tools and equipment, Technical publications, Work orders, Service Bulletins

  1mo

  Licensed AME M2 (ACA) – B737 / ATR

  Edmonton, AB

  $38.52–$53.29/hrFull Time

  

  Canadian North: Canadian North is also the premier provider of air charter services for large resource sector clients requiring dependable, efficient and economical…

  4+ YOECandidates need a valid Transport Canada AME M2 licence, an approved aircraft maintenance diploma, at least 4 years of aircraft maintenance experience, and a Canadian driver's licence. An AVOP with D/DA rating and a Restricted Area Identity Card are required, and Boeing 737 or ATR experience is an asset.

  Aircraft maintenance manuals, Work order systems, Service Bulletins, Engineering instructions

  1mo

  Licensed AME M2 (ACA) – B737 / ATR

  Iqaluit, NU

  $38.52–$53.29/hrFull Time

  

  Canadian North: Canadian North is also the premier provider of air charter services for large resource sector clients requiring dependable, efficient and economical…

  4+ YOECandidates need a valid Transport Canada AME M2 licence, an approved aircraft maintenance diploma and at least 4 years of aircraft maintenance experience. They also need a Canadian driver's licence, the ability to obtain an AVOP and a Restricted Area Identity Card, and strong troubleshooting and teamwork skills.

  Boeing 737

• 1mo

  Optometrist (Full-Time) – FYidoctors – Fort McMurray, AB

  Fort McMurray, AB

  Full Time

  AO

  All Optometrists

  Candidates need a licensed optometry background and the ability to work with a diverse patient base. Experience with ophthalmic diagnostic equipment is an asset.

  Optomap, Corneal topographer, Visual field (Matrix), Autorefractor, Manual and automated lensometers, iLux

• 1mo

  Optometrist (Full-Time) – FYidoctors – Fort McMurray, AB

  Fort McMurray, AB

  Full Time

  

  FYidoctors: Doctor-led, professionally managed, and patient focused, FYidoctors is Canada’s largest eye care provider, headquartered in Calgary, AB.

  Candidates need to be licensed optometrists able to work a full-time schedule across the clinic's Monday to Saturday hours. The posting emphasizes collaboration, patient care and interest in growing specialty services.

  Optomap, Corneal Topographer, Visual Field (Matrix), Autorefractor, Manual and Automated Lensometers, iLux

• 1mo

  Quality Control Lead, Assay Lab

  British Columbia

  Full Time

  

  SKEENA GOLD + SILVER: Skeena is a Canadian mining exploration and development company focused on revitalizing the Eskay Creek and Snip Projects, two past-producing mines…

  5+ YOECandidates need a chemistry degree or technical diploma plus 5 to 7 years in a mining or commercial exploration assay lab. Required skills include fire assay, wet chemistry, LIMS, ISO 17025 and WHMIS, along with a record of building safety culture.

  LIMS, Microsoft Office, ICP-OES, LECO, Eltra C/S

• 1mo

  Vice President, PMO

  Vaughan, ON

  

  Wyse Meter Solutions Inc

  8+ YOEWyse Meter Solutions needs a candidate with 8-10+ years of project or program management experience, including leading a PMO or portfolio function. A degree in business, engineering, computer science or project management is required, along with hands-on experience with tools such as Jira and Confluence.

  Jira, Confluence, MS Project, Atlassian toolset

• 1mo

  Class 3 Operator

  Fort McMurray, AB

  $41.44/hrFull Time

  CH

  Clean Harbors: Clean Harbors is North America’s leading provider of environmental and industrial services.

  1+ YOECandidates need a Class 1 or 3 licence with 18-speed manual transmission experience and at least one year of oilsands or industrial work. They must hold valid First Aid, H2S Alive and CSO certificates before site arrival.

  hydrovac, vac truck, combo truck

• 1mo

  Aircraft Maintenance Technician

  Cold Lake, AB

  Full Time

  

  Top Aces (TAI): Top Aces provides advanced adversary air (ADAIR) and joint terminal attack controller (JTAC) technology and training to the world’s leading armed…

  Candidates need a Transport Canada accepted or accredited aircraft maintenance training course, the ability to work independently and troubleshoot, and English and French communication. Commercial or military aircraft experience is an asset, and line maintenance experience is preferred. A Level 2 Canadian Government clearance and access to the Controlled Goods Program are required.

  Perform aircraft maintenance, Work independently, Troubleshoot, Health and safety, Regulatory compliance, Personal protective equipment

  1mo

  Aircraft Maintenance Technician

  La Baie, QC

  Full Time

  

  Top Aces (TAI): Top Aces provides advanced adversary air (ADAIR) and joint terminal attack controller (JTAC) technology and training to the world’s leading armed…

  Candidates need a Transport Canada accepted or accredited aircraft maintenance training course and the ability to work independently. Experience on commercial or military aircraft is an asset, and bilingual English and French communication is required.

  Aircraft maintenance tools and equipment

  1mo

  Alpha Jet Pilot

  Canada

  Full Time

  

  Top Aces (TAI): Top Aces provides advanced adversary air (ADAIR) and joint terminal attack controller (JTAC) technology and training to the world’s leading armed…

  3+ YOECandidates need an Airline Transport or Commercial Pilot licence, an instrument rating, a valid category 1 medical, and at least 2,000 hours as pilot-in-command in fighter aircraft. Operational experience, English communication and a Level II clearance are also required.

  Alpha Jet, towed target system

  1mo

  Aircraft Engine Technician

  La Baie, QC

  Full Time

  

  Top Aces (TAI): Top Aces provides advanced adversary air (ADAIR) and joint terminal attack controller (JTAC) technology and training to the world’s leading armed…

  Candidates need a professional aeronautics diploma or proven similar experience, with mechanics or aircraft engine maintenance experience preferred. They must read manuals in English, speak French, pass Controlled Goods and Secret clearances and work flexible shifts.

  Inspection, Troubleshooting, Painting, Order supplies, Quality assurance procedures, Work independently

  1mo

  Technical Standards and Training Instructor

  La Baie, QC

  Full Time

  

  Top Aces (TAI): Top Aces provides advanced adversary air (ADAIR) and joint terminal attack controller (JTAC) technology and training to the world’s leading armed…

  8+ YOECandidates need at least 8 years of experience with Top Aces, knowledge of aircraft maintenance software and manuals, and strong communication skills. Controlled Goods and Level 2 Secret clearances are required, and an AME licence and flight line experience are assets.

  RAMCO, SharePoint, Absorb, Microsoft Office, ground support equipment

  1mo

  Aircraft Maintenance Technician

  Goffs, NS

  Full Time

  

  Top Aces (TAI): Top Aces provides advanced adversary air (ADAIR) and joint terminal attack controller (JTAC) technology and training to the world’s leading armed…

  Candidates need a Transport Canada accepted aircraft maintenance course or accredited equivalent, and can work independently with strong troubleshooting and problem-solving skills. Commercial or military aircraft experience and Line Maintenance experience are assets, and a Level II security clearance is required.

  aircraft maintenance tools

  1mo

  Lead AI and Automation

  Dorval, QC

  Full Time

  

  Top Aces (TAI): Top Aces provides advanced adversary air (ADAIR) and joint terminal attack controller (JTAC) technology and training to the world’s leading armed…

  8+ YOECandidates need experience leading AI, automation or digital transformation programs, with knowledge of enterprise architecture, data governance and security. Strong judgment on responsible AI, regulated environments and stakeholder change management is expected.

  Ramco MRO, ERP systems

  1mo

  Technical Publications Author

  Dorval, QC

  Full Time

  

  Top Aces (TAI): Top Aces provides advanced adversary air (ADAIR) and joint terminal attack controller (JTAC) technology and training to the world’s leading armed…

  Candidates need broad knowledge of technical manual structure, including ATA and WUC organization, IPB/IPC and aircraft maintenance manuals, plus aircraft configuration management and airworthiness concepts. Strong Microsoft Office and document production skills, attention to detail, and fluent English are required; French or German is an asset.

  Microsoft Word, Microsoft Office, Adobe, SharePoint

• 1mo

  Aviation Maintenance Analyst II

  Montréal, QC

  Full Time

  DB

  Default Brand

  2+ YOECandidates need 2+ years in aviation maintenance, manufacturing or a related technical field, plus a BS or equivalent and an A&P licence or equivalent. They must read technical manuals and regulations, manage several projects at once, and communicate clearly with customers and colleagues.

  CAMP maintenance tracking application

• 1mo

  Optometrist (Full-Time) – FYidoctors – Fort McMurray, AB

  Fort McMurray, AB

  Full Time

  

  solis optics

  Candidates need to be licensed optometrists who can work with modern eye-testing technology and build patient care in a collaborative team.

  Optomap, Corneal Topographer, Visual Field (Matrix), Autorefractor, Manual and Automated Lensometers, iLux

• 1mo

  Part Time T56 Engine Mechanic (Comox, BC) - Temporary

  Winnipeg, MB

  Part Time

  

  StandardAero

  Candidates need previous aircraft mechanic experience in an aerospace setting and T56 turboprop engine experience. Lifting up to 50 pounds and standing for long periods are required, and a licence or aviation training such as AME, CAMC, A&P or AMT is desirable.

  hand tools, power tools, precision measuring equipment, production management computer system

  1mo

  Manual Machinist (SACS)

  Winnipeg, MB

  Full Time

  

  StandardAero

  5+ YOECandidates need at least Level 3 machining from an apprenticeship or equivalent training, plus 5 or more years of manual machining experience. They must read blueprints well, use precision measuring tools, solve problems mathematically, lift up to 50 pounds and stand for long periods.

  lathe, calipers, micrometers, gauges, hand tools

  1mo

  Manual Machinist

  Winnipeg, MB

  Full Time

  

  StandardAero

  2+ YOECandidates need at least two years of hands-on manual machining experience, strong mechanical aptitude and precision, and skill reading blueprints and using measuring tools. They must be able to lift 50 pounds and stand for long periods.

  calipers, micrometers, gauges, conventional machines, hand tools

  1mo

  CNC Machinist

  Winnipeg, MB

  Full Time

  

  StandardAero

  2+ YOECandidates need 2+ years of CNC experience or a machinist apprenticeship, plus permanent full-time work authorization in Canada. Strong blueprint reading, precision measuring skills and the ability to lift 50 pounds are required.

  calipers, micrometers, gauges, hand tools, production management computer systems

• 1mo

  Driller’s Helper - Canadian Citizens and Residents Only

  Canada

  Full Time

  

  Hy-Tech Drilling

  Candidates need to be Canadian citizens or residents legally authorized to work in Canada, with a valid Canadian driver's licence and the ability to pass a physical demands assessment. Experience is an asset but formal training is not required, and a mechanical mindset and strong work ethic are key.

  drill rods, hydraulic systems, supply pumps, drilling rigs

• 1mo

  Mechanic (Heavy Duty Equipment) - Voisey's Bay

  Newfoundland and Labrador

  On-siteFull Time

  

  The Redpath Group: Established in 1962, The Redpath Group is an experienced, full-service solutions provider to the global underground mining industry.

  3+ YOECandidates need at least 3 years as a mechanic in mining, construction or a similar industry, or a journeyperson certificate. They must read schematics and service manuals and diagnose diesel engines and powertrain and brake systems.

  Engine/powertrain diagnostic software, Handheld diagnostic tools, Parts and service manuals

12 companies