“Brake controllers” jobs in Canada – Page 15

No matching filters. Try another name.

Results

• 1mo

  Aircraft Maintenance Engineer, ACA

  Edmonton, AB

  Full Time

  C

  Courtney1

  Candidates need a valid Transport Canada AME M2 licence and experience or a type rating on B757, B767 or B777 aircraft. They must be able to lift 50 lbs, work at heights, and show strong problem-solving and communication skills.

  measuring instruments, test equipment, MS Word, MS Excel

  1mo

  Aircraft Maintenance Engineer, ACA

  Hamilton, ON

  Full Time

  C

  Courtney1

  Candidates need a valid Transport Canada AME M2 licence and experience or a type rating on B757, B767 or B777 aircraft. They must be able to lift 50 lbs, work at heights, and show strong problem-solving and communication skills.

  measuring instruments, test equipment, MS Word, MS Excel

  1mo

  Aircraft Maintenance Engineer, ACA

  Hamilton, ON

  Full Time

  C

  Courtney1

  Candidates need a valid Transport Canada AME M2 licence and experience or a type rating on B757, B767 or B777 aircraft. They must be able to lift 50 lbs, work at heights, and show strong problem-solving and communication skills.

  measuring instruments, test equipment, MS Word, MS Excel

  1mo

  Apprentice, Ground Service Equipment

  Winnipeg, MB

  Full Time

  C

  Courtney1

  Candidates need a high school diploma, interest in enrolling in a 310S or 310T automotive apprenticeship, and basic mechanical and troubleshooting skills. A valid provincial driver's licence and the ability to obtain airside airport permits, plus lifting up to 50 lbs and working at heights, are required.

  forklift, high lift, hand tools, measuring instruments, basic testing equipment

  1mo

  Aircraft Maintenance Engineer, ACA

  Vancouver, BC

  Full Time

  C

  Courtney1

  Candidates need a valid Transport Canada AME M2 licence and experience or a type rating on B757, B767 or B777 aircraft. They must be able to lift 50 lbs, work at heights, and show strong problem-solving and communication skills.

  measuring instruments, test equipment, MS Word, MS Excel

  1mo

  Mechanic, Ground Service Equipment

  Winnipeg, MB

  Full Time

  C

  Courtney1

  Candidates need post-secondary education, a valid provincial driver's licence and the ability to get a Restricted Area Identity Card and an Airside Vehicle Operator's Permit. Automotive service technician credentials such as Red Seal are preferred, along with a personal toolbox and tools.

  high lift, hand tools, measuring instruments, test equipment, MS Word, MS Excel

• 1mo

  Heavy Duty Mechanic

  Calgary, AB

  Full Time

  

  WinSport

  3+ YOECandidates need a Red Seal or equivalent heavy equipment technician certification and 3 to 5 years of snow cat or snow grooming vehicle maintenance. WinSport also wants knowledge of hydrostatic drives, hydraulics, diesel engines, air brakes and two- and four-stroke engines, plus a valid driver's licence.

  Computerized diagnostic tools, Welding equipment, Hand and power tools

• 1mo

  Apprentice Technician

  Richmond Hill, ON

  

  PAG Direct

  Candidates need a valid driver's licence with a recent drivers abstract and previous experience changing, balancing and mounting tires. Dealership or general service experience, basic computer skills, and the ability to lift up to 25 lbs and stand for long periods are also expected.

  diagnostic tools, manufacturer software

  1mo

  Automotive Service Technician Apprentice

  Richmond Hill, ON

  $36.92/hr

  

  PAG Direct

  1+ YOECandidates need a trades certificate or diploma, or equivalent experience, and one to two years of relevant automotive experience. Strong English, attention to detail and professionalism in a fast-paced service environment are needed.

  diagnostic tools, manufacturer software

• 1mo

  Water & Wastewater Operator I

  Westbank, BC

  Full Time

  

  Westbank First Nation

  Westbank First Nation needs candidates with EOCP Level 1 water distribution and wastewater collection certificates, a Class 5 BC driver's licence and first aid training. Basic computer, SCADA and mechanical skills are also expected.

  SCADA, Excel, Word, AutoCAD, field test kits, WFN laptop

  1mo

  Water & Wastewater Operator II

  Westbank, BC

  Full Time

  

  Westbank First Nation

  1+ YOECandidates need one year of recent experience at a Class 2 or higher facility and EOCP Level 2 water distribution and treatment certificates. They also need a Level 1 wastewater collection certificate, a Class 5 BC driver's licence and a criminal record check accepted by WFN.

  SCADA, Word, Excel, power tools, valves and gates

  1mo

  Water & Wastewater Operator III

  Westbank, BC

  Full Time

  

  Westbank First Nation

  Candidates need EOCP water distribution and treatment certificates, a wastewater collection certificate, a Class 5 BC driver's licence and several safety certificates. Experience with SCADA and a criminal record check acceptable to WFN are also required.

  SCADA, water treatment equipment, plan reading tools, spreadsheets

• 1mo

  Journeyperson, HET

  Fort McMurray, AB

  

  McKay Metis Group

  Candidates need a trade certificate and a valid driver's licence, with a CVIP licence an asset. Experience diagnosing and repairing heavy-duty equipment, drivetrains and air brake systems is expected.

  computerized test equipment, engine diagnostic equipment, calibration devices

• 1mo

  Licensed Automotive Technician - Vans Centre

  Oakville, ON

  

  HSC Holdings Inc

  4+ YOECandidates need four years of direct automotive repair experience, a valid Ontario G licence, a clean driver's abstract, a Technicians Licence and Ontario College of Trades membership. Strong diagnostic skills, clear communication and the ability to drive manual transmission vehicles are also required.

  Diagnostic computers, Electronic diagnostic equipment, Compression gauges, Hand tools, Power tools

• 1mo

  Mécanicien automobile // Mechanic

  Montréal, QC

  $30–$40/hrFull Time

  EI

  EBlock Inc.

  5+ YOEAu moins cinq ans d'expérience ou formation en technologie automobile; Expérience des systèmes hybrides et électriques; Capacité à interpréter des manuels d'entretien complexes

  ADAS calibration equipment, Mobile diagnostic apps

• 1mo

  Fab Machine Operator - Day Shift

  Edmonton, AB

  Full Time

  

  Powell

  1+ YOECandidates need a high school diploma and the ability to read shop drawings and learn CNC programming. Experience in metal fabrication, a sheet metal trade certification and familiarity with turret, press brake, plasma or laser equipment are assets.

  Turret punch, Press brake, Microsoft Office, MES

• 1mo

  Senior Millwright

  Barrie, ON

  Full Time

  ?

  Our award-winning products offer a best-in-class experience for all customers’ home comfort needs; The warmth and experience that Napoleon product brings to the homes of our customers transcends borders, language, and…

  Millwright, Troubleshooting, CNC, PLC, Robotics, Technical drawings

• 1mo

  Senior Millwright

  Barrie, ON

  Full Time

  ?

  Our award-winning products offer a best-in-class experience for all customers’ home comfort needs; The warmth and experience that Napoleon product brings to the homes of our customers transcends borders, language, and…

  Millwright, Troubleshooting, CNC, PLC, Robotics, Technical drawings

• 1mo

  Equipment Operator

  Innisfail, AB

  Full Time

  

  Mainroad: The Mainroad Group is a 100% Employee-owned Canadian company with a head office based in Surrey, British Columbia and branch offices located in…

  Candidates need a high school diploma, a Class 3 or 1 licence with air brake endorsement and a clean abstract, and prior equipment operating and physical labour experience. They must be comfortable with heavy work, shift and weekend availability and extreme weather.

  heavy equipment, plow

  1mo

  Equipment Operator

  Camrose, AB

  Full Time

  

  Mainroad: The Mainroad Group is a 100% Employee-owned Canadian company with a head office based in Surrey, British Columbia and branch offices located in…

  3+ YOECandidates need a high school diploma, a Class 3 licence with air brake endorsement and a clean driver's abstract, plus three years of related work and highway or snow equipment experience. They must be able to do heavy physical labour in extreme weather and work as part of a team.

  CMA, Work as a team, Process improvement, Cleaning

  1mo

  Highway Maintenance Worker (Seasonal/Casual)

  Nanaimo, BC

  Full Time

  

  Mainroad: The Mainroad Group is a 100% Employee-owned Canadian company with a head office based in Surrey, British Columbia and branch offices located in…

  Candidates need a valid Class 1 or Class 3 licence with an air brake endorsement and a clean driver's abstract. Construction or highway maintenance experience is an asset, along with mechanical aptitude, teamwork and a strong commitment to safety.

  sanding truck, plow truck, salting truck

  1mo

  Equipment Operator

  Vermilion, AB

  Full Time

  

  Mainroad: The Mainroad Group is a 100% Employee-owned Canadian company with a head office based in Surrey, British Columbia and branch offices located in…

  3+ YOECandidates need a high school diploma, a Class 3 licence with air brake endorsement and a clean driver's abstract, plus three years of related experience. Experience with highway maintenance or snow removal equipment, knowledge of the Motor Vehicle Act, and willingness to work in extreme weather are required.

  highway maintenance equipment, snow plow, heavy equipment

  1mo

  Highway Maintenance Worker (Seasonal/Casual)

  Gold River, BC

  Full Time

  

  Mainroad: The Mainroad Group is a 100% Employee-owned Canadian company with a head office based in Surrey, British Columbia and branch offices located in…

  Mainroad needs candidates with a valid Class 1 or Class 3 licence with air brake endorsement and a clean driver's abstract. Mechanical aptitude, teamwork, strong communication and a commitment to safety are essential, and prior construction or highway maintenance experience is an asset.

  sanding truck, salting truck, snow plow

• 1mo

  Licensed Millwrights - Days/Afternoons

  Woodstock, ON

  

  Vuteq Canada Inc.

  2+ YOECandidates need a valid Maintenance Millwright 443A certificate of qualification and at least two years of practical experience. Knowledge of hydraulics, pneumatics and electricity is an asset, along with WHMIS training and a valid driver's licence.

  Lathes, Milling machines, Precision measuring tools, Hand and power tools

11 companies