“Electrical testing equipment” jobs in Canada – Page 16

No matching filters. Try another name.

Results

• 2d

  Automotive Service Technician

  Surrey, BC

  $38–$50/hr

  

  The Jim Pattison Auto Group

  Candidates need previous automotive technician experience, a Red Seal certification or working toward it, and a valid BC driver's licence with a satisfactory driver's abstract. Strong diagnostic skills and the ability to drive manual and automatic vehicles are also required.

  Air tools, Hoists, Diagnostic equipment

  2d

  Automotive Service Technician - North Vancouver

  North Vancouver, BC

  

  The Jim Pattison Auto Group

  Candidates need previous automotive technician experience, with dealership experience highly preferred, and a Red Seal certification or be in the process of challenging it. A valid BC driver's licence with a satisfactory driver's abstract is required, along with strong diagnostic skills, the ability to lift up to 60 pounds and stand for long periods.

  diagnostic equipment, hoists, air tools

• 2d

  Advanced Care Paramedic

  Alberta

  Full Time

  

  Alberta Health Services

  Candidates need a non-restricted Alberta College of Paramedics registration as an Advanced Care Paramedic, current BCLS CPR certification, and a valid Class 4 Alberta Operator's Licence with a clean five-year driver abstract. Physical fitness for heavy lifting and awkward positions is required.

  ambulance, advanced life support airway adjuncts, electrical therapy equipment, non-emergent transport vehicles

  2d

  Advanced Care Paramedic - Metro

  Edmonton, AB

  Full Time

  

  Alberta Health Services

  Candidates need active Alberta College of Paramedics registration as an Advanced Care Paramedic, current BCLS CPR, and a valid Class 4 Alberta driver's licence with a clean driver abstract. Physical fitness for heavy lifting and demanding conditions is required, and the F.A.R.E. test applies to applicants without a current clinical position.

  Ambulance, Advanced life support airway adjuncts, Non-emergent transport vehicles

  2d

  Advanced Care Paramedic

  Beaverlodge, AB

  Full Time

  

  Alberta Health Services

  Candidates need a non-restricted Alberta College of Paramedics Advanced Care Paramedic registration, current BCLS CPR and a valid Class 4 licence with a clean driver abstract. Previous EMS experience is preferred, along with the F.A.R.E. test for applicants without a current clinical position.

  ambulance, advanced life support airway adjuncts, non-emergent transport vehicles

  2d

  Advanced Care Paramedic

  Fort Macleod, AB

  

  Alberta Health Services

  Candidates need non-restricted Alberta College of Paramedics registration as an Advanced Care Paramedic, current BCLS CPR, and a Class 4 driver's licence with a clean driver abstract. Applicants without a current clinical position must complete the F.A.R.E. physical test.

  ambulance, advanced life support airway adjuncts, electrical therapy equipment

  2d

  Advanced Care Paramedic

  Slave Lake, AB

  Full Time

  

  Alberta Health Services

  Candidates need a non-restricted Alberta College of Paramedics registration as an Advanced Care Paramedic, current BCLS CPR certification, and a valid Class 4 Alberta Operator's Licence with a clean five-year driver abstract. Applicants without a current clinical position must pass the F.A.R.E. physical test.

  ambulance, advanced life support equipment, airway adjuncts

• 2d

  Electrical Engineer (Controls and Infrastructure)

  Richmond, BC

  $100k–$140k/yrHybridFull Time

  GF

  General Fusion Inc.

  5+ YOECandidates need a bachelor's degree in electrical engineering, P.Eng. registration or eligibility with EGBC, and 5+ years of hands-on experience taking control panels from schematic to commissioning. Strong PLC programming skills in IEC 61131-3 and knowledge of the Canadian Electrical Code are also required.

  Beckhoff TwinCAT, multimeter, insulation resistance tester, oscilloscope, AutoCAD Electrical, EPLAN

  2d

  Mechanical Engineer

  Richmond, BC

  $95k–$115k/yrHybridFull Time

  GF

  General Fusion Inc.

  5+ YOEGeneral Fusion needs candidates with a mechanical engineering or engineering physics degree and at least 5 years of post-graduate mechanical design experience. Candidates need hands-on skills, GD&T and materials knowledge, and comfort with changing requirements and tight deadlines.

  SolidWorks, SolidWorks PDM

• 2d

  Reliability Engineering

  Oakville, ON

  NN

  Natus Neuro

  7+ YOECandidates need a bachelor's degree in an engineering discipline and 7+ years of product reliability experience on complex hardware and software products. They need strong knowledge of reliability standards and methods such as Weibull analysis and accelerated testing.

  Oscilloscope, Logic analyzer, Data acquisition system, Spectrum analyzer, Function generator, Jama

• 2d

  Controls Engineer

  Vancouver, BC

  Full Time

  O

  OC

  5+ YOECandidates need a mechanical, electrical, controls, or computer engineering credential, 5+ years in HVAC controls or building automation, and experience programming DDC systems. Strong troubleshooting, organization, communication, and a valid driver's licence are also required.

  Tridium, Siemens, Honeywell, JCI, Distech, BACnet

• 2d

  Technicien(ne) biomédical(e) sur le terrain

  Montréal, QC

  Full Time

  TS

  The Stevens Company

  Candidates need a biomedical or electronics engineering technology diploma, experience repairing electronic and mechanical equipment, and the ability to read blueprints and schematics. Strong problem-solving, communication and customer service skills are also needed, along with a valid Quebec class 5 licence and the ability to lift up to 23 kg.

  Instruments de mesure et d'étalonnage, Système de gestion de maintenance, Documentation technique des fabricants

• 2d

  Director of Engineering

  Toronto, ON

  Full Time

  MN

  Matchtech North America

  10+ YOE5+ MgmtCandidates need 10+ years of railway signalling and train control experience, including 5+ years in senior leadership. They need ETCS, CBTC and North American legacy signalling expertise, knowledge of CENELEC, AREMA, CROR and Transport Canada standards, and a degree in an engineering discipline. A P.Eng. is preferred.

  Microsoft Office, engineering software

• 2d

  Field Service Representative (FSR)

  Victoria, BC

  Contract

  

  Insight Global: Insight Global is an international talent and consulting company that delivers business outcomes in an ever-changing world.

  6+ YOECandidates need either an electrical engineering bachelor's degree with 6+ years of relevant experience or a certified communications/electronics technician with 8+ years of hands-on experience. Strong electrical troubleshooting, wiring, soldering and test equipment skills, plus a valid driver's licence and a passport, are required.

  multimeter, oscilloscope, multifunction process calibrator, hand tools, power tools

• 2d

  Electrical & Security Design Engineer

  Burnaby, BC

  Full Time

  R

  Raise

  8+ YOECandidates need at least 8 years of progressive electrical, P&C or physical security design experience, an EGBC P.Eng. or P.Geo. with a Permit to Practice, and hands-on skills in layouts, schematics, cable selection and commissioning. A Class 5 driver's licence and strong English communication are also required.

  CAD systems, Microsoft Word, Microsoft Excel, Microsoft PowerPoint

• 2d

  Gas Fitter (G1 Licensed)

  Westmount, QC

  Full Time

  II

  I8IS - Infiniti Software Solutions

  3+ YOECandidates need a valid Ontario G1 Gas Technician Certificate and 3-5 years of commercial or industrial gas equipment experience. They must read mechanical drawings and know Ontario gas codes and TSSA safety requirements.

  combustion analyzers, pressure testing equipment, leak detection equipment

• 2d

  Junior HIL Engineer EIT

  North Vancouver, BC

  Full Time

  EI

  EdgeTunePower Inc.

  Candidates need a bachelor's degree in electrical engineering or a related field, a grasp of three-phase power systems and controls, and experience with at least one simulation tool such as RSCAD, PSCAD, MATLAB/Simulink, Typhoon HIL, or OPAL-RT. Basic Python or scripting skills and eligibility for EIT registration are also required.

  RSCAD, RTDS, PSCAD, MATLAB/Simulink, Typhoon HIL, OPAL-RT

• 2d

  Electrical Drafter / Designer

  Ontario

  Full Time

  AC

  Amaris Consulting | Part of Mantu

  5+ YOECandidates need an engineering degree and about 5 to 10 years of industrial electrical design experience. Strong hands-on AutoCAD Electrical 2023 skills, knowledge of PLCs, HMI, SCADA and low-voltage distribution, and local work authorization are required.

  AutoCAD Electrical, Autodesk Vault, AutoCAD

• 2d

  Technical Support Manager - HVAC & Heat Pumps (Bilingual French/ English)

  Montréal, QC

  Full Time

  

  Summit Search Group: Summit Search Group is a leading national recruitment firm committed to helping great employers find smart, motivated people to advance both the…

  5+ YOECandidates need at least 5 years of residential or commercial HVAC technical experience, strong hands-on troubleshooting in refrigeration and electrical controls, and fluent written and spoken French and English. Experience with heat pumps, RTUs and VRF systems, supporting contractors, and delivering training is strongly preferred.

• 2d

  Electrician

  Toronto, ON

  Full Time

  NE

  Norel Electric

  Candidates need a valid Electrician licence or journeyperson certification and knowledge of Ontario electrical codes. Commercial project experience, blueprint reading and strong safety habits are required, along with the ability to handle lifting and climbing.

  Hand tools, Test equipment

• 2d

  Pre-Delivery Inspection (PDI) Technician

  Toronto, ON

  Full Time

  SN

  Sinoboom North America

  Candidates need a diploma or degree in heavy equipment mechanics, hydraulics or electrical technology, or equivalent trade experience. A forklift certification or the ability to obtain one and knowledge of DC circuits, hydraulics and schematics are required; MEWP or heavy machinery experience is strongly preferred.

  forklift, hydraulic test equipment, service management system

• 2d

  Marine Technician

  Vancouver, BC

  Full Time

  DB

  Deep Blue Marine Inc (DPBE)

  Candidates need hands-on experience with private boats or yachts, engine and marine electrical work, and diagnosing repairs. Physical fitness for lifting and confined spaces, plus good communication and attention to safety, are required.

• 2d

  Laboratory Scientist – Advanced Nanomaterials & Composites

  Pickering, ON

  Full Time

  VE

  Volta Energy Inc.

  3+ YOECandidates need a bachelor's degree in materials science, chemistry, chemical engineering, nanotechnology or a related field, plus at least three years of hands-on lab or R&D experience with advanced materials. They must design experiments independently, troubleshoot, and follow strong laboratory safety practices.

  SEM, Raman spectroscopy, FTIR, TGA, XRD, GC

• 2d

  Ingénieur électrique / Electrical Engineer

  Val-d'Or, QC

  Full Time

  FC

  Fresnillo Canada Inc

  Candidates need a bachelor's degree in electrical engineering and membership in the Ordre des ingénieurs du Québec. Experience in mining or industrial electrical systems, strong analytical and project management skills, and fluency in French with working English are required.

  electrical network design and analysis tools

18 companies