Experienced Technician, Environmental
London, ON +2WSP
3+ YOE3+ MgmtCandidates need at least three years supervising drilling and remediation contractors, a diploma in environmental sciences, a valid driver's licence, and strong health and safety knowledge. They must also be willing to travel and work with little supervision.
ESRI What if?, Health and safety, Hazard assessment, Work efficiently, Program management, Conduct field work
Environmental Project Manager
Saskatoon, SK +1WSP
8+ YOECandidates need a bachelor's degree in science or engineering and at least 8 years of contaminated site assessment experience. They need strong financial and budget management skills, soil and groundwater sampling experience, and knowledge of Saskatchewan environmental regulations. A professional designation and oil and gas experience are assets.
ESRI What if?, Environmental assessment, Program management, Prepare technical reports, Time management, Communication skills
Electrical Engineer - Heritage Buildings
Ottawa, ON +1WSP
12+ YOECandidates need an Ontario Professional Engineer licence and at least 12 years of complex building electrical design experience, ideally on heritage projects. They need working knowledge of the Canadian Electrical Code, Ontario Building Code, LEED v4.0 and CAN/ULC life safety standards, and Enhanced Reliability clearance.
MS Office
Junior Geotechnical Engineer-in-Training
Terrace, BCWSP
Candidates need a civil, geological or geotechnical engineering degree and EIT registration or eligibility with a Canadian engineering association. They also need a valid Canadian driver's licence, a clean driver's abstract, MS Office skills, early hands-on geotechnical experience, and willingness to travel and work in the field.
MS Office
Intermediate Communications Design Specialist
Toronto, ONWSP
5+ YOECandidates need 5 to 10 years designing complex communications systems on large transit projects, plus an engineering degree (P.Eng. highly desirable). Strong knowledge of IP networking, rail communications and systems engineering is required, and rail cybersecurity credentials are an asset.
BIM
Electrical Engineer - Aviation
Ontario +1WSP
4+ YOECandidates need a bachelor's degree in electrical engineering, a P.Eng. licence in Ontario or eligibility for it, and 4 to 7 years of electrical design and construction experience. Airfield electrical or large infrastructure work, aviation standards knowledge and design tools such as AutoCAD, MicroStation or Revit are needed.
AutoCAD, MicroStation, Revit
Senior Principal Mine Waste Engineer
Mississauga, ON +1WSP
15+ YOECandidates need a Bachelor's or Master's in a relevant engineering discipline, a P.Eng. with eligibility to practice in Ontario, and 15+ years of progressive tailings, mine waste or dam safety experience. Experience as Engineer of Record or Independent Technical Reviewer and leading multidisciplinary teams is required.
ESRI What if?, Leadership, Waste management, Coaching, Risk management, Regulatory compliance
Senior Highway Designer, Engineer
Thunder Bay, ON +1WSP
10+ YOECandidates need a civil engineering degree or diploma, 10 to 20+ years of highway or roadway design experience (MTO projects preferred), and a P.Eng or engineering technologist designation. Design-build or P3 experience, knowledge of Ontario environmental standards, and leadership skills are also required.
OpenRoads, AutoCAD, MicroStation, Civil 3D, Microsoft Project, MTO CPS
Senior Bridge Engineer
Ottawa, ON +1WSP
7+ YOECandidates need a civil engineering degree, a PEO Professional Engineer licence and 7-12 years of structural and bridge design experience in Canada. Strong knowledge of Canadian design codes, structural analysis software and bridge inspection and rehabilitation is essential.
structural analysis software
Principal Resource Geologist
Toronto, ON +1WSP
15+ YOECandidates need 15+ years of resource geology experience, a relevant geology or geological engineering degree, and P.Geo. registration in Canada or the ability to obtain it quickly. Strong skills in mineral resource estimation, geostatistics, Leapfrog, Datamine and Vulcan, and the ability to act as a Qualified Person are expected.
Leapfrog, Datamine, Vulcan, Supervisor, Isatis
Lead Geomorphologist
Calgary, AB +4WSP
10+ YOECandidates need a master's degree or advanced education in Physical Geography, Earth Science or a related field, and Professional Geoscientist registration (or eligibility within 6 months) in BC, AB, SK or NWT. At least 10 years of consulting experience, deep knowledge of fluvial, coastal and hillslope processes, and proven leadership are required.
ESRI What if?, Strategic planning, Earth science, P.Geo., Leadership, Problem solving
Drainage Engineer / EIT / Designer
Calgary, ABWSP
3+ YOECandidates need a civil engineering degree and P.Eng. eligibility, 3 to 6 years of stormwater design experience, hands-on Civil 3D or MicroStation skills, and PCSWMM experience. Strong communication and problem-solving skills in a collaborative consulting setting are also required.
Civil 3D, MicroStation, PCSWMM, XPSWMM, InfoDrainage, InfoWorks ICM
Electrical Stations Engineer
Trail, BCWSP
8+ YOECandidates need a bachelor's degree in electrical engineering, an EGBC Professional Engineering designation, and 8+ years of substation or utility engineering experience. Proficiency with AutoCAD, Primavera, ETAP and similar tools is expected.
AutoCAD, Primavera, SharePoint, MS Office, CDGES, CymeTCC
Electrical Engineer-in-Training, Buildings
Victoria, BCWSP
Candidates need an accredited electrical engineering bachelor's degree and EIT registration or eligibility. They need an understanding of building electrical design, communication skills, and a Reliability Security Clearance held or obtainable.
AutoCAD, Revit
Senior Bridge Structural Engineer
Burlington, ON +1WSP
5+ YOECandidates need a Civil Engineering degree, a Professional Engineer licence in Ontario, and 5-10 years of structural and bridge design experience in Canada. Strong knowledge of CHBDC and AREMA codes, bridge analysis software, and clear written and verbal communication is essential.
Structural analysis software
Engineer, Bridges and Civil Structures
Burlington, ON +1WSP
1+ YOECandidates need a civil engineering degree, Professional Engineer registration in Ontario and 1 to 5 years of structural and bridge design experience in Canada. Working knowledge of structural analysis software, current Canadian design codes, bridge inspection and rehabilitation, and strong report writing and communication skills are required.
Structural analysis software
Senior Design Technician, Bridges
Edmonton, ABWSP
Candidates need a diploma in structural, civil or transportation engineering technology and AutoCAD skills in a design setting. Exposure to bridge structures, field inspection work and clear technical writing are also expected, with Civil 3D, Revit and TEC BIM certification as assets.
AutoCAD, MicroStation, Civil 3D, Revit
Senior Instrumentation & Controls Engineer, Resources
Greater Sudbury, ON +1WSP
12+ YOECandidates need at least 12 years of electrical engineering design experience in heavy industry, a related engineering degree, and a P.Eng. designation. Strong PLC, DCS and SCADA expertise and experience with P&IDs, loop diagrams and commissioning are required.
PLC, DCS, SCADA
Senior Design Technician
Etobicoke, ON +1WSP
10+ YOECandidates need a diploma in civil engineering technology or a related field, and drafting experience, ideally in structural infrastructure. Working knowledge of AutoCAD and Civil 3D, basic civil design concepts, and strong attention to detail are required.
AutoCAD, Civil 3D
Electrical BIM Revit Modeler
Thornhill, ONWSP
5+ YOEWSP needs candidates with 5+ years of experience in electrical or lighting design, CAD and Revit BIM modelling, plus ACC use. Strong knowledge of power distribution, fire alarm and lighting controls is required, along with Revit, Navisworks and AutoCAD proficiency.
Revit, Navisworks, AutoCAD, Dynamo, Civil 3D, Bentley MicroStation
Senior Mining Engineer
Calgary, AB +1WSP
10+ YOECandidates need a Mining Engineering degree, a Professional Engineer designation or eligibility, and 10 to 15+ years of open pit mine planning experience. Advanced Deswik skills and experience leading PEA, PFS and FS studies are required.
Deswik, Vulcan, MineScape, ArcGIS
Lead Instrumentation & Control Engineer, Resources
Greater Sudbury, ON +1WSP
18+ YOEWSP needs candidates with at least 18 years of electrical engineering design experience in heavy industry, a related engineering degree, and a Professional Engineer (P.Eng.) designation. Strong PLC, DCS and SCADA expertise, plus experience with commissioning and safety systems, are required.
PLC, DCS, SCADA
Lead Electrical Engineer, Resources
Greater Sudbury, ON +1WSP
18+ YOEWSP needs at least 18 years of electrical design experience in heavy industry, a Professional Engineer (P.Eng.) licence, and knowledge of CSA, ANSI and IEEE standards. Candidates should be proficient in power system modelling tools, have led and mentored engineers, and hold a valid driver's licence.
ETAP, EasyPower
Senior Electrical Engineer, Resources
Greater Sudbury, ON +1WSP
12+ YOECandidates need at least 12 years of electrical design experience on heavy industrial facilities and a P.Eng. registration. They must know CSA, ANSI and IEEE standards, be skilled in power system modelling tools, and hold a valid driver's licence.
ETAP, EasyPower