“Panel saws” jobs in Canada – Page 3

No matching filters. Try another name.

Results

• 1mo

  Manufacturing Production Associate

  Victoria, BC

  $20–$25/hr

  

  BAUCO Access Panel Solutions Inc: As a manufacturer of quality access panels, BAUCO Access Panel Solutions assists architects, developers, and contractors in solving service access…

  Candidates need good mechanical aptitude, attention to detail, basic hand tool experience and the ability to do repetitive physical work. No prior experience is required, but experience in manufacturing, construction or fabrication is a bonus.

  Table saw, Chop saw, Drywall screw gun, Power tools, Hand tools

• 1mo

  Manufacturing Positions

  Saskatoon, SK

  

  SUPERIOR CABINETS

  Candidates need a high school diploma or higher and the physical fitness to lift components and raw materials up to 50 lbs. They must work well in a fast-paced environment, show consistent attendance and a safety-conscious attitude.

  CNC machinery, panel saw, router, edge bander, vertical drill, automated sanding machine

• 1mo

  Carpenter - Revelstoke

  Canada

  Full Time

  

  Paradigm Building Solutions Ltd

  3+ YOECandidates need three to five years of carpentry or related construction experience, with strong framing skills and the ability to read drawings. Panelized construction experience, Fall Protection certification and a valid driver's licence are assets, and Red Seal is not required.

  hand tools, power tools, saws, crane

  1mo

  Carpenter

  Revelstoke, BC +3

  Full Time

  

  Paradigm Building Solutions Ltd

  3+ YOECandidates need three to five years of carpentry or related construction experience, strong framing skills and the ability to read blueprints. Panelized construction, crane-assisted erection, Red Seal or Journeyperson certification and Fall Protection are assets, and a valid driver's licence is preferred.

  hand tools, power tools, saws, crane

• 1mo

  Production Labourer

  Langley, BC

  Full Time

  

  Formations Inc.

  Candidates need a high school diploma, the ability to lift 50 lbs repeatedly, basic math and computer skills, and prior manufacturing experience. A forklift certification and attention to detail are also required.

  forklift, CNC router, panel press, beam saw, thermofoil press, glue spray booth

• 1mo

  Junior Electrical Engineering

  Woodbridge, ON

  Full Time

  PI

  Pliteq Inc

  1+ YOECandidates need one to five years of electrical and mechanical troubleshooting in manufacturing, an engineering degree or diploma from a Canadian institution, and P.Eng. or EIT status. Strong PLC programming skills and CAD experience are also needed.

  PLC (Allen-Bradley), AutoCAD, SolidWorks, ERP, lathe, milling machine

• 1mo

  Operator

  Grand Falls, NB

  Full Time

  P

  Pexco

  Candidates need to be comfortable with basic measuring tools such as calipers and micrometers, and to work carefully to tight tolerances. They must follow job instructions, operate a forklift and saws safely, and work both alone and in a team.

  Skive machine, Epicor, Forklift, Shear saw, Cut-off saw, Band saw

  1mo

  Operator

  Grand Falls, NB

  Full Time

  P

  Pexco

  5+ YOECandidates need 5+ years of lathe operation experience and job shop experience. They must lift 60 lbs and be willing to cross-train. PC skills are helpful and working knowledge of ERP systems is preferred.

  Hydraulic ram press, Sintering oven, Forklift, Shear saw, Cut-off saw, Band saw

• 1mo

  CAD Draftsperson

  Calgary, AB

  Full Time

  TF

  Teknion - Family of Brands

  5+ YOECandidates need post-secondary education in mechanical engineering technology, industrial design or drafting, and at least five years of SolidWorks, AutoCAD 2D and 3D, and detailing experience. Knowledge of manufacturing processes and the ability to read engineering drawings and BOMs are also needed.

  AutoCAD, SolidWorks, Construct 15 (Imos), Insight, CNC machines, Microsoft Office

• 1mo

  Opérateur(trice) de Scie Horizontale / Beam Saw

  Montréal, QC

  On-siteFull Time

  IV

  International Visual Corporation

  Expérience avec une scie horizontale ou équipement de coupe industriel; Capacité à lire des plans et listes de coupe; Bonnes aptitudes en mathématiques et prise de mesures

  beam saw, horizontal panel saw, forklift

• 1mo

  Warehouse Framer / Drywaller

  Surrey, BC

  On-siteFull Time

  

  RWC Systems

  RWC Systems needs candidates with prior framing, drywall, carpentry or general construction experience, and the ability to read drawings and use measuring tools accurately. Candidates must use hand and power tools safely, communicate in English, and wear CSA approved steel-toed boots.

  impact drill, screw gun, power saw, measuring tools, tablet, forklift

• 1mo

  Cabinet Maker/Installer

  Sherwood Park, AB

  On-siteFull Time

  

  Salvi Homes

  3+ YOESalvi Group needs at least 3 years of similar experience and 2 years installing residential cabinets and millwork. Candidates need a Class 5 licence with a clean abstract, a current Criminal Record Check, the ability to read installation drawings, and mechanical knowledge of tools and machines.

  CNC nesting machine, doweling machine, case clamps, sliding table saw, jointer, planer

• 1mo

  Boat Interior Jr Woodworker - Full Time

  Campbell River, BC

  $24–$30/hrOn-siteFull Time

  

  EagleCraft Boats Inc.

  1+ YOECandidates need 1-3 years of residential construction or cabinet-building experience and hands-on use of basic woodworking tools. Marine interior woodworking experience is preferred, along with a positive attitude, willingness to learn and good communication.

  Tape measure, Hand drill, Sander, Table saw

• 1mo

  Saw Operator

  Brampton, ON

  $20–$24/hrFull Time

  VB

  Vertex Building Science Solutions Inc.

  Roofmart needs candidates who can read technical drawings, work at a fast pace in a production warehouse, and lift 80 to 100 lbs. A valid forklift licence is required, with training provided; carpentry, trade or table saw experience is an asset.

  sliding panel saw, table saw, forklift

• 1mo

  Site Framer

  Calgary, AB

  On-siteFull Time

  

  Promise Robotics

  2+ YOECandidates need a high school diploma or equivalent and 2-5 years of residential framing experience. Journeyman Carpenter certification, AutoCAD or Revit skills, knowledge of building codes and the ability to lift up to 50 pounds are also needed.

  saws, drills, nail guns, framer's squares, measuring tapes, AutoCAD

  1mo

  Senior Site Framer

  Calgary, AB

  On-siteFull Time

  

  Promise Robotics

  5+ YOECandidates need at least 5 years of residential framing experience, including leading framing teams, plus a high school diploma or equivalent. Knowledge of building codes, blueprints and health and safety rules is required, and Journeyman Carpenter certification and AutoCAD or Revit skills are assets.

  saws, drills, nail guns, framer's squares, measuring tapes, AutoCAD

  1mo

  Production Framer

  Edmonton, AB

  On-siteFull Time

  

  Promise Robotics

  2+ YOECandidates need at least 2 years of residential framing experience and a high school diploma or equivalent. Knowledge of building codes, blueprint reading and imperial and metric measurements is required, with Journeyman Carpenter certification and AutoCAD or Revit as assets.

  Saws, Drills, Nail guns, Framer's squares, Measuring tapes, AutoCAD

  1mo

  Production Framer

  Calgary, AB

  On-siteFull Time

  

  Promise Robotics

  2+ YOECandidates need at least 2 years of framing experience and a high school diploma or equivalent. Promise Robotics prefers residential construction knowledge, a journeyman carpenter certification, and the ability to read blueprints and use hand and power tools.

  AutoCAD, Revit, saws, drills, nail guns, framer's squares

13 companies