“assembly tools” jobs in Canada – Page 3

No matching filters. Try another name.

Results

• 16h

  Weld Robot Operator

  Brant, ON

  TI

  Tigercat Industries

  Candidates need prior manual welding and welding robot operation experience. They must read blueprints, select welding parameters on a computer system and repair welds to a high finish.

  robotic welding equipment, overhead crane, jib crane, measuring tools

  16h

  Electrical Wire Harness Assembler

  Brant, ON

  TI

  Tigercat Industries

  Candidates need good hand dexterity, attention to detail, and the ability to read electrical drawings and schematics. Basic math, mechanical aptitude with hand and power tools, and the ability to tell coloured wires apart are also required.

  hand tools, power tools, crimp press, wire twister, wire stripper, routing board

  17h

  Mechanical Assembler

  Brant, ON

  TI

  Tigercat Industries

  Candidates need hands-on mechanical skill with hand and power tools and experience with recreational vehicles, small engines, landscaping equipment or trades training. Reading blueprints is an asset, and candidates must be physically able to lift, climb, kneel and bend.

  Hand tools, Power tools, Pneumatic tools, Overhead crane, Jib crane, Lifting devices

  17h

  Mechanical Assembler

  Cambridge, ON

  TI

  Tigercat Industries

  Candidates need mechanical aptitude, the ability to read blueprints and assembly drawings, and good manual dexterity. Experience with gears, engines and hydraulics is preferred, and related trades or small engine experience is considered.

  hand tools, power tools, pneumatic tools, jib crane

  17h

  Machine Operator

  Brant, ON

  TI

  Tigercat Industries

  Tigercat Industries needs candidates with previous manufacturing or hands-on experience who are comfortable with physically demanding work around grease and oil. Strong attention to detail, clear communication and machine operation knowledge are needed. Experience with hand or power tools is an asset.

  wire cutting machine, wire braiding machine, hand tools, power tools

  17h

  General Labour

  Brant, ON

  TI

  Tigercat Industries

  Tigercat Industries needs candidates with previous manufacturing or hands-on work experience who can handle physically demanding tasks with grease and oil exposure. Experience with hand or power tools is an asset, along with attention to detail and the ability to work with minimal supervision.

  Scrapers, Grinders, Overhead crane, Jib crane, Hand tools, Power tools

  17h

  Heavy Duty Equipment Mechanic

  Brant, ON

  TI

  Tigercat Industries

  Candidates need previous experience maintaining and repairing heavy-duty mobile equipment, and proven skills with hydraulic, engine, electrical and electronic systems. Diagnostic and troubleshooting ability and good teamwork and communication are essential.

  hand tools, power tools, pneumatic tools, overhead crane, jib crane, diagnostic equipment

• 16h

  Mechanical Drafter, Sealing & Design

  Edmonton, AB

  $34.13–$56.41/hrFull Time

  SL

  Silent-Aire Limited Partnership

  Candidates need a diploma or certificate in mechanical design, drafting or a related field, plus extensive hands-on experience with Autodesk Inventor and PTC Creo. They also need strong skills in GD&T, fabrication drawings, and design for manufacturing and assembly.

  Autodesk Inventor, PTC Creo

• 16h

  Financial Analyst

  Oakville, ON

  $74k–$124k/yrHybridFull Time

  

  Ford BlueOvalCity\/TEVC

  5+ YOECandidates need a bachelor's degree in commerce, finance, accounting or a related field, and at least 5 years of budgeting and forecasting experience. They must understand financial reporting and control processes and use Microsoft Excel, Word and PowerPoint at an advanced level.

  Microsoft Excel, Microsoft Word, Microsoft PowerPoint, Power BI, Microsoft Copilot, ChatGPT

• 16h

  Repair & Maintenance Technician - Liner Hangers

  Clairmont, AB

  Full Time

  

  Weatherford: Weatherford International plc (Nasdaq: WFRD) is a leading global energy services company.

  4+ YOECandidates need 4-6+ years of Oil & Gas repair and maintenance experience, a high school diploma or equivalent, strong troubleshooting ability, computer skills in Microsoft Office, and the ability to work from technical manuals with minimal supervision.

  Micrometers, Calipers, Lifting equipment, Advanced hand tools, Microsoft Office, WO Time tracking system

• 16h

  Mechanic

  Vancouver, BC

  $52.66/hr

  

  Lantic Inc.: is a proudly Canadian-owned company specializing in sugar and natural sweetener solutions.

  Candidates need a BCTQ Machinist or Mechanic/Millwright Red Seal certification or equivalent Canadian journeyperson certification with Interprovincial Red Seal, plus experience working safely with industrial equipment. Food industry experience is an asset but not essential.

  Blueprints, Manufacturers' manuals

  16h

  Mechanic

  Vancouver, BC

  $52.66/hr

  

  Lantic Inc.: is a proudly Canadian-owned company specializing in sugar and natural sweetener solutions.

  Candidates need a BCTQ Machinist or Mechanic/Millwright Red Seal certification or equivalent Canadian journeyperson certification, plus experience with safe working practices on industrial equipment. Good communication skills, the ability to work independently and in a team, and a strong attendance record are required. Food industry experience is an asset.

  Blueprints

• 16h

  Construction- Framing

  Niagara Falls, ON

  Full Time, Contract

  

  Express Employment Professionals: The Express franchise brand is an industry-leading, international staffing company with franchise locations across the U.S., Canada, South Africa,…

  Candidates need hands-on residential and commercial framing experience, plus blueprint reading and safe tool and equipment use. They should know construction safety and material handling, and be able to do physically demanding work to deadlines.

  hand tools, power tools, construction equipment

• 16h

  Plumbing Apprentices - Kamloops

  Kamloops, BC

  $28.19–$46.13/hrOn-siteFull Time

  

  Pitt Meadows Plumbing & Mechanical Systems

  Candidates need strong communication and teamwork skills, mechanical aptitude, and the ability to lift 50 lbs and work at heights up to 25 feet. They must be legally entitled to work in Canada and fully vaccinated as required by the client.

  hand tools, power tools, workshop equipment, scissor lifts, ladders, scaffolding

• 16h

  Licensed Diesel Truck Technician/Mechanic I

  Mississauga, ON

  Full Time

  

  Penske: Penske Truck Leasing is a Penske Transportation Solutions company headquartered in Reading, Pennsylvania.

  5+ YOECandidates need 5+ years of tractor trailer maintenance experience and a Red Seal or 310T provincial licence. They also need a class D or class 3 licence with air brake certification, or the ability to obtain it within 6 months, and strong tool proficiency.

  hand tools, power tools, pneumatic wrenches, welding equipment, hydraulic jacks, hoists

  16h

  Licensed Diesel Truck Technician/Mechanic I

  Mississauga, ON

  Full Time

  

  Penske: Penske Truck Leasing is a Penske Transportation Solutions company headquartered in Reading, Pennsylvania.

  5+ YOEPenske needs an experienced, licensed truck technician with 5+ years of tractor-trailer maintenance experience and a Red Seal or 310T licence. Candidates also need a Class D or Class 3 driver's licence with air brake certification, or the ability to get it within 6 months, plus strong tool and diagnostic skills.

  hand tools, power tools, pneumatic wrenches, welding equipment, hydraulic jacks, hoists

• 17h

  (CAN) OMNI Customer Fulfillment Associate

  Cold Lake, AB

  Full Time

  WC

  Wal-Mart Canada Corp

  Candidates need to be at least 16 years old and able to work a flexible schedule, including evenings, weekends and holidays. The role also needs the ability to stand for long periods, lift up to 20 lbs (occasionally 50 lbs), and handle a fast-paced workload.

  17h

  (CAN) OMNI Customer Fulfillment Associate PT

  Salmon Arm, BC

  Part Time

  WC

  Wal-Mart Canada Corp

  Wal-Mart Canada needs candidates aged 16 or older who can work a flexible schedule, lift up to 20 lbs (occasionally 50 lbs), and stand for long periods. Candidates should be able to handle a fast-paced workload accurately.

  17h

  (CAN) Préposé au traitement des commandes OMNI

  Québec, QC

  Full Time

  WC

  Wal-Mart Canada Corp

  Candidates need to be at least 16 years old and comfortable working a fast-paced, flexible schedule. Strong attention to detail, physical stamina for lifting and standing, and friendly customer interaction are important.

• 17h

  Production Cell Lead

  Alberta

  Full Time

  

  Durabuilt Windows & Doors: Durabuilt Windows & Doors has been recognized as the #1 ENERGY STAR® certified window and door manufacturer in Canada - a distinction earned through…

  3+ YOECandidates need 3+ years of manufacturing experience, daily production planning skills, and basic lean manufacturing knowledge. Window, door, glass or construction experience is an asset, along with a high school diploma or GED and a clear criminal background check.

  Machinery

• 17h

  Agronomy Intern

  Dundalk, ON

  

  Midwest co-operative services

  Candidates need current enrollment in an agriculture or related college or university program and a valid driver's licence. They should show interest in crops and hands-on fieldwork, comfort with basic technology including GPS, strong teamwork and communication skills, and flexibility during the busy season.

  GPS, MiField, Agronomy software, Phone apps, Spreaders

• 17h

  Sheet Metal Worker

  Grimsby, ON

  $22.50–$28.50/hrFull Time

  

  ATCO

  Candidates need experience as a sheet metal worker or apprentice and knowledge of sheet metal fabrication tools and techniques. They must read technical drawings, lift 55 lbs, and show strong attention to detail and manual dexterity. Modular or prefabricated construction experience is an asset.

  shears, press brake, roller, hand tools, power tools

• 17h

  In Store Bakery - Decorator Cake Full-time

  Parksville, BC

  

  Thrifty Foods

  Candidates need at least three months of experience, partial high school education, and the ability to work independently in a fast-paced environment.

• 17h

  Fabricator (Calgary, AB)

  Alberta

  Full Time

  

  Wolseley Canada Inc.

  Candidates need mechanical aptitude, strong attention to detail, and the ability to read measurements and basic specifications. Fabrication, manufacturing or construction experience and tool use are assets, along with the physical ability to lift and handle materials all shift.

  Hand tools, Power tools, Fabrication equipment

14 companies