“schematics” jobs in Canada – Page 3

No matching filters. Try another name.

Results

• 12h

  Electromechanical Technician

  Montréal, QC

  Full Time

  CI

  Calian in Space & Technology

  Candidates need a DEC/DCS, DEP/DVS or technical certificate in a related field, plus hands-on mechanical aptitude and experience in mechanical or electro-mechanical assembly. Basic electrical wiring knowledge, the ability to read engineering drawings, and eligibility for the Controlled Goods Program are required.

  Forklift, Genie lift, Man lift, Hand and power tools

• 12h

  Instrumentation & Controls Systems Engineer

  Mississauga, ON

  Full Time

  C

  CBRE

  5+ YOECandidates need a bachelor's degree in an engineering discipline and at least 5 years of experience in instrumentation or controls. They need strong knowledge of PLC, SCADA, HMI and building automation systems, industrial protocols, and reading P&IDs and control drawings. Currently authorized to work in Canada without visa sponsorship is required.

  PLC, SCADA, HMI, Building Automation Systems, Microsoft Excel, Microsoft Word

• 12h

  Senior Electronics Design Engineer – Embedded Systems

  St. Catharines, ON

  Full Time

  TS

  TalentSphere Staffing Solutions

  7+ YOECandidates need about 7–10 years of hands-on electronics or embedded systems experience, including PCB design, microcontroller work and C/C++ firmware debugging. A bachelor's degree in an engineering discipline is preferred, though equivalent practical experience is considered. Knowledge of serial protocols (SPI, I2C, UART, CAN, Ethernet) and bench test equipment is required.

  Altium Designer, KiCad, oscilloscope, logic analyzer, multimeter

• 13h

  Lead/Senior Lead Gate Automation Technician

  London, ON

  Full Time

  HE

  Hudson Entry & Automation

  5+ YOECandidates need at least 5 years of direct gate automation experience, formal gate technician training and active gate service certifications. They also need UL325 knowledge, low-voltage wiring and welding skills, a valid G licence and a clear police record check.

  Mini backhoe, Skid steer, Truck-mounted crane, Ladders, Power tools, Cloud-based field management system

• 13h

  Avionics Technician

  Montréal, QC

  Full Time

  IQ

  Immigrant Québec

  Candidates need technical training in electrical engineering, electronics or a related field, and the ability to read electrical schematics and use wiring tools. Aerospace or industrial experience, attention to detail and fluent French are also needed.

• 13h

  Heavy Equipment Mechanic

  New Brunswick

  Full Time

  GT

  Guardian Tanks

  Candidates need training in heavy equipment or industrial mechanics, or an equivalent mix of education and experience; apprentices are welcome. Knowledge of mechanical, electrical and hydraulic systems, a valid driver's licence, and fluency in both French and English are required.

  diagnostic tools, forklift, loader, welding equipment

• 13h

  Electrical Production Technician

  Burlington, ON

  Full Time

  CC

  Circuit Check Inc.

  3+ YOECandidates need a high school diploma or equivalent and 3+ years of electrical assembly experience. They must read electronic blueprints, follow ESD and safety procedures, and work well in a team with full-time attendance.

  Digital multimeter, Power supplies, Microscope, Soldering iron, CAD

• 13h

  NPI Engineer (New Product Introduction)

  Victoria, BC

  Full Time

  BE

  Bailey Electronics

  3+ YOECandidates need an engineering degree or technologist diploma (or equivalent experience), at least 3 years of work experience, and knowledge of mobile equipment electrical, software or mechanical systems. Hands-on PFMEA/DFMEA, lean manufacturing, ECM, MRP/ERP and stage-gate NPI experience are required.

  Microsoft Office, MRP/ERP tools, PFMEA/DFMEA tools, Production test equipment, Fixtures and assembly lines

• 13h

  Service Technician

  Québec, QC

  Full Time

  IR

  Ingersoll Rand

  2+ YOECandidates need a diploma in electromechanics, industrial mechanics or an equivalent field, plus 2 to 5 years of industrial maintenance experience (an asset). Strong troubleshooting skills, the ability to use test instruments and good physical condition are required.

  multimeter, vibration analyzer, tachometer, laser alignment tools, forklift, overhead crane

• 13h

  Maintenance & Facilities Technician

  Ontario

  Full Time

  FL

  Fibracast Ltd.

  2+ YOEFibracast needs about two or more years of industrial maintenance experience and a trades qualification. Candidates must read technical drawings and troubleshoot mechanical, electrical, pneumatic and hydraulic systems.

  CMMS, Maintenance logs

• 13h

  Senior Electrician

  Cambridge, ON

  Full Time

  KI

  KWE INC.

  Candidates need a valid Ontario electrician licence, hands-on experience with wiring, panels and conduit, and strong troubleshooting and blueprint-reading skills. Supervising or mentoring apprentices is an asset, and reliable transportation to Cambridge is required.

• 13h

  Assembly Mechanic Apprentice

  Lively, ON

  Full Time

  

  Komatsu

  2+ YOEKomatsu needs an apprentice mechanic or someone with mechanical trade training, or 2-5 years of large equipment assembly experience. Candidates should understand hydraulics and electrical systems, read schematics, lift up to 40 lbs, work well in a team, and handle varied shifts.

  hand tools, power tools, large tooling, assembly equipment

• 13h

  Maintenance Electrician

  Harley, ON

  Full Time

  SP

  Stubbe's Precast

  5+ YOECandidates need at least 5 years of experience as a licensed 442A or 309A electrician, strong knowledge of industrial electrical practices and code, and a firm understanding of PLC logic, motor starters, VFDs, Ethernet and Profibus. Candidates must be able to read complex wiring schematics, work with little supervision, and bring their own standard tools.

  Overhead cranes, Concrete batching system, Genie booms, Forklifts, Hand tools, CMMS

• 13h

  Refrigeration Mechanic

  Vancouver, BC

  Full Time

  TU

  The University of British Columbia

  3+ YOECandidates need a Red Seal or BCTQ Refrigeration and Air Conditioning Mechanic certification, 3 to 5 years of industrial experience, a valid B.C. Class 5 driver's licence, and strong troubleshooting and teamwork skills. A 4th Class Power Engineer certificate is desirable.

  Power tools, Hand tools

• 13h

  HVAC Refrigeration Technician/Associate

  Cambridge, ON

  Full Time

  MA

  Mafna Air Technologies Inc.

  5+ YOECandidates need at least 5 years of HVAC or refrigeration installation and service experience, plus a 313A Asset certification. They must understand refrigeration cycles, read engineering drawings and hold a valid driver's licence.

  HVAC, Refrigeration mechanic, Troubleshooting, Read engineering drawings, Valid driver's licence

• 13h

  Intégrateur Système Commandes de Vol (Intermédiaire)

  Montréal, QC

  Full Time

  GS

  Groupe SII

  5+ YOEBaccalauréat en génie aérospatial ou mécanique; Environ 5 ans d'expérience en systèmes de commandes de vol; Connaissance d'ARP 4754 et ARP 4761

  MS Office, outils de gestion des requis

• 13h

  Maintenance Technician

  Ingersoll, ON

  Full Time

  CI

  Coilplus, Inc.

  3+ YOECandidates need Red Seal Industrial Electrician and/or Industrial Mechanic certification, 3-5 years of industrial maintenance experience in manufacturing, and strong troubleshooting skills. Experience with PLC-controlled equipment and metals processing is an asset.

  PLC, maintenance software, diagnostic instruments, testing equipment, hand tools, power tools

• 13h

  General Welder

  Vaughan, ON

  Full Time

  CR

  Cleveland Range

  Candidates need a recognized welding apprenticeship or equivalent certification, proven TIG and sheet metal experience in a manufacturing setting, and the ability to read blueprints. Knowledge of welding safety standards and legal authorization to work in Canada are also required.

  TIG welder, MIG welder, welding equipment, hand tools

• 13h

  Electrician

  Calgary, AB

  Full Time

  A

  ADM

  2+ YOECandidates need a valid Journeyman Electrician certification and at least two years of experience, preferably industrial. They need strong troubleshooting, PLC, schematic-reading and communication skills, plus knowledge of OHS, GMP, HACCP and food safety rules.

  PLC, electrical schematics, motors

• 13h

  Security system technician

  Concord, ON

  Full Time

  CF

  CAPITAL FIRE & SECURITY SYSTEMS LTD

  Candidates need a technical diploma, trade certification or equivalent experience in security, fire, electronics or a related field, plus a valid driver's licence and clean driver abstract. Strong troubleshooting, wiring diagram reading and documentation skills are required.

  control panels, CCTV, test equipment

• 13h

  Millwright

  Dawson Creek, BC

  Full Time

  LB

  LP Building Solutions

  3+ YOECandidates need at least 3 years of industrial experience, a Red Seal Industrial Mechanic/Millwright, and knowledge of equipment maintenance. They must be able to work at heights and in confined spaces, lift, climb and stand for long periods, and work well in a team.

  CMMS, Vibration analysis equipment, Thermal imaging, Stethoscopes, Strobe lights, Welding equipment

• 13h

  HV Laboratory Test Engineer (Production Electrical Test Engineer)

  Ontario

  Full Time

  RM

  Richards Manufacturing Company

  Candidates need a bachelor's degree in Electrical Engineering and hands-on experience with electrical wiring, troubleshooting, and reading schematics. PLC programming and controls experience and knowledge of electrical safety standards are also required; high-voltage testing experience is preferred.

  PLC, test equipment, calibration equipment

• 13h

  Maintenance Mechanic

  Burlington, ON

  Full Time

  

  Hood Packaging Corporation: Hood Packaging is a quality manufacturer of packaging materials with 23 production facilities located in the United States and Canada.

  3+ YOECandidates need a Red Seal 433A Industrial Millwright Mechanic certification, at least three years in a manufacturing environment, and a solid grasp of mechanical, electrical, pneumatic and hydraulic systems. Strong troubleshooting, CMMS experience, blueprint reading and comfort with 12-hour shifts are also required.

  CMMS, hand tools, power tools, welding equipment, machining equipment

• 13h

  EWIS Design Engineer / Senior EWIS Design Engineer

  Québec, QC

  Full Time

  GP

  Global Partner Solutions

  5+ YOECandidates need a bachelor's degree in an engineering discipline (or equivalent experience), typically 5+ years of aerospace engineering experience for Level 3 and 10-15 years for Level 4, and strong knowledge of aircraft EWIS design and certification. CATIA V5 with Electrical Workbenches is essential, and fluent English is required.

  CATIA V5, ENOVIA, Microsoft Office, NX, Teamcenter

24 companies