“Electrical control schematics” jobs in Canada – Page 6

No matching filters. Try another name.

Results

• 1d

  Senior Electrical Engineer

  Oakville, ON

  $140k–$160k/yr

  NN

  Natus Neuro

  6+ YOENatus Neuro needs a candidate with at least 6 years of electrical engineering design and testing experience and a bachelor's or master's degree. The candidate should know circuit analysis, signal processing and control systems, and be familiar with FDA, CE and ISO 13485 requirements.

  Altium, Cadence, SPICE, MATLAB

• 2d

  Field Service Representative (FSR)

  Victoria, BC

  Contract

  

  Insight Global: Insight Global is an international talent and consulting company that delivers business outcomes in an ever-changing world.

  6+ YOECandidates need either an electrical engineering bachelor's degree with 6+ years of relevant experience or a certified communications/electronics technician with 8+ years of hands-on experience. Strong electrical troubleshooting, wiring, soldering and test equipment skills, plus a valid driver's licence and a passport, are required.

  multimeter, oscilloscope, multifunction process calibrator, hand tools, power tools

  2d

  Controls Hardware Designer

  Cambridge, ON

  Contract

  

  Insight Global: Insight Global is an international talent and consulting company that delivers business outcomes in an ever-changing world.

  Candidates need strong EPLAN design experience and industrial electrical or control hardware design experience across at least six or seven of the listed technical areas. They must be able to work onsite in Cambridge, Ontario and meet 10 CFR Part 810 citizenship or access requirements.

  EPLAN, Allen-Bradley, Siemens, FANUC, ABB, KUKA

• 2d

  Gas Fitter (G1 Licensed)

  Westmount, QC

  Full Time

  II

  I8IS - Infiniti Software Solutions

  3+ YOECandidates need a valid Ontario G1 Gas Technician Certificate and 3-5 years of commercial or industrial gas equipment experience. They must read mechanical drawings and know Ontario gas codes and TSSA safety requirements.

  combustion analyzers, pressure testing equipment, leak detection equipment

• 2d

  EIC Engineer, Instrumentation & Control

  Ontario

  Full Time

  AC

  Amaris Consulting | Part of Mantu

  5+ YOECandidates need a bachelor's degree in an engineering field, at least 5 years of industrial automation and PLC programming, and hands-on experience with Rockwell and Schneider controllers and process skids. They also need to read P&IDs and electrical drawings, know instrumentation and industrial networks, and be eligible for P.Eng. registration in Canada.

  Studio 5000 Logix Designer, FactoryTalk View, PanelView, Control Expert, EcoStruxure, Vijeo Citect

  2d

  Electrical Drafter / Designer

  Ontario

  Full Time

  AC

  Amaris Consulting | Part of Mantu

  5+ YOECandidates need an engineering degree and about 5 to 10 years of industrial electrical design experience. Strong hands-on AutoCAD Electrical 2023 skills, knowledge of PLCs, HMI, SCADA and low-voltage distribution, and local work authorization are required.

  AutoCAD Electrical, Autodesk Vault, AutoCAD

• 2d

  Industrial Electrician

  Etobicoke, ON

  Full Time

  PI

  ProVolta Inc.

  Candidates need hands-on experience with industrial electrical systems, motors and control panels, and the ability to read schematics. They must know ESA codes and lockout/tagout, hold a trade certification or apprenticeship completion, and be eligible to work as an electrician in Ontario.

  multimeter, PLC, test equipment

• 2d

  Test Engineering Specialist

  Montréal, QC

  Full Time

  X

  Xiphos

  5+ YOEXiphos needs candidates with a Bachelor's or Master's in an engineering or computer science field and 5-7 years in test engineering. Candidates must have Python, Linux, and electronics test equipment experience and be able to obtain Canadian government security clearance.

  Python, Linux, Robot Framework, multimeter, oscilloscope, waveform generator

• 2d

  Embedded Developer (Hardware/Firmware Engineer)

  London, ON

  Full Time

  IP

  IQ PARTNERS

  5+ YOECandidates need a degree or diploma in computer, electrical or electronics engineering and relevant embedded hardware or firmware experience. Strong embedded C/C++ skills, schematic and PCB design knowledge, and the ability to obtain a security clearance are required.

  Git, JTAG debugger, oscilloscope, logic analyzer, Microsoft Office

• 2d

  Senior Electrical Controls Designer

  Burlington, ON

  Full Time

  AC

  A&H Custom Machine

  5+ YOECandidates need a post-secondary diploma or degree in electrical engineering, automation, controls or a related program, plus 5 or more years of electrical controls design experience. Experience with Allen-Bradley and Siemens PLCs, EPLAN or AutoCAD Electrical, and knowledge of UL and CSA codes are required.

  EPLAN, AutoCAD Electrical, Allen-Bradley PLC, Siemens PLC, HMI software, Microsoft Excel

• 2d

  Senior Controls Engineer

  Oakville, ON

  Full Time

  IG

  itec group Inc.

  10+ YOECandidates need about 10 years of PLC or robotic programming experience in industrial automation or custom machinery, plus experience with machine commissioning and on-site troubleshooting. Valid driver's licence and passport are required, and willingness to travel is essential.

  Allen-Bradley, Siemens PLC, FANUC, ABB, Yaskawa

• 2d

  HVAC/R Technician

  Bowen Island, BC

  Full Time

  AC

  Align Climate Solutions Inc.

  Align Climate Solutions needs candidates with HVAC/R troubleshooting, plumbing, electrical and preventive maintenance experience, plus knowledge of refrigerant regulations. An HVAC/R trade certification or apprenticeship is required, Red Seal is an asset, and a valid driver's licence is needed.

  HVAC/R test equipment, Hand tools

• 2d

  Switchgear Engineer

  Edmonton, AB

  Full Time

  SC

  Solution Control Systems Inc.

  Solution Control Systems Inc. needs candidates with strong knowledge of LV and MV switchgear and power distribution equipment, experience with CAD drawings, and familiarity with UL 891 and CSA C22.2 standards. Engineering education is preferred, and experience in oil and gas, utilities, mining or manufacturing is an asset.

  CAD

• 2d

  Electrician - Night shift

  Cambridge, ON

  $46/hr

  

  Dare Foods Limited: Dare has been a proudly Canadian, family-owned company since 1889.

  2+ YOECandidates need 2 to 5 years of manufacturing experience and a valid Ontario industrial electrician 442A licence. PLC, drives and electrical diagram skills are required, and food manufacturing experience is a strong asset.

  PLC, SEW drives, servo drives, SCADA

• 2d

  Mechanical & Electrical Construction Inspector

  Toronto, ON

  Full Time

  G

  GFT

  10+ YOECandidates need 10+ years of heavy transit, industrial or municipal infrastructure experience, a valid P.Eng. with PEO, and deep knowledge of industrial HVAC, plumbing and high-voltage electrical systems. A valid driver's licence and legal right to work in Canada are also required.

  Digital field-reporting software

• 2d

  Journeyman electrician

  Nisku, AB

  JC

  Johnson Controls

  Candidates need a licensed Journeyperson Electrician certification and experience with machinery and electrical maintenance. They must read blueprints and schematics well, communicate clearly, and follow Alberta safety rules.

  Blueprints, Schematics, Vendor manuals

• 2d

  Electronic Technician (Oilfield Cementing)

  Grande Prairie, AB

  On-site

  SE

  Sanjel Energy Services Inc

  Candidates need a diploma or degree in electronic, electrical engineering or instrumentation, plus a Class 5 driver's licence with a clean abstract. Sanjel Energy Services values hands-on wiring, soldering and fabrication skills, strong communication, and self-motivation to work with little supervision.

  PLC, data acquisition systems, schematics, soldering equipment

  2d

  Electronic Technician (Oilfield Cementing)

  Alberta

  On-site

  SE

  Sanjel Energy Services Inc

  Candidates need a diploma or degree in electronic, electrical engineering or instrumentation, plus a Class 5 driver's licence with a clean abstract. Sanjel Energy Services values hands-on wiring, soldering and fabrication skills, strong communication, and self-motivation to work with little supervision.

  PLC, data acquisition systems, schematics, soldering equipment

• 2d

  Team Leader Maintenance - Electrical

  Taber, AB

  Full Time

  LW

  Lamb Weston Canada ULC

  3+ YOE1+ MgmtCandidates need a high school diploma, supervisory experience and electrical maintenance experience in manufacturing, ideally with a current Oregon electrical journeyman or supervisor license. Strong skills in reading electrical drawings, PLC systems and programming, NEC code, communication and computer applications are required.

  PLC systems, Electrical schematics, Process control systems

• 2d

  (CAN) Technician - HVAC/R

  Corner Brook, NL

  $37.60–$47/hrFull Time

  WF

  Walmart Facility Services ULC

  Candidates need a 313A Refrigeration & Air Conditioning Systems Mechanic licence, hands-on commercial HVAC/R and supermarket refrigeration experience, and controls troubleshooting skills including DDC and Energy Management Systems. A G1 Gas Technician licence is preferred, and mentoring experience is an asset.

  DDC controls, Energy Management System, heavy machinery, company vehicle

  2d

  (CAN) Technician - HVAC/R

  Grand Falls, NB

  $37.60–$47/hrFull Time

  WF

  Walmart Facility Services ULC

  Candidates need a 313A Refrigeration & Air Conditioning Systems Mechanic licence, with hands-on experience in commercial HVAC/R and supermarket refrigeration. A G1 Gas Technician licence is preferred, along with controls troubleshooting skills.

  DDC / Energy Management Systems, heavy machinery, company vehicle

  2d

  (CAN) Technician - HVAC/R

  Miramichi, NB

  $37.60–$47/hrFull Time

  WF

  Walmart Facility Services ULC

  Candidates need a 313A Refrigeration and Air Conditioning Systems Mechanic licence, plus strong hands-on experience with commercial HVAC/R and supermarket refrigeration. Strong mechanical, electrical and controls troubleshooting skills, including DDC and energy management systems, are required, and a G1 Gas Technician licence is preferred.

  heavy machinery, company vehicle, DDC controls, energy management system

  2d

  (CAN) Technician - HVAC/R

  Sydney, NS

  $37.60–$47/hrFull Time

  WF

  Walmart Facility Services ULC

  Candidates need the 313A Refrigeration and Air Conditioning Systems Mechanic licence, strong hands-on experience with commercial HVAC/R and supermarket refrigeration, and solid mechanical, electrical and controls troubleshooting skills. A G1 Gas Technician licence is preferred, along with experience mentoring technicians or apprentices.

  heavy machinery, DDC controls, Energy Management Systems, company vehicle

  2d

  (CAN) Technician - HVAC/R

  Timmins, ON

  $37.60–$47/hrFull Time

  WF

  Walmart Facility Services ULC

  Candidates need a 313A Refrigeration and Air Conditioning Systems Mechanic licence, hands-on commercial HVAC/R and supermarket refrigeration experience, and strong mechanical, electrical and controls troubleshooting skills. A G1 Gas Technician licence is preferred, along with experience mentoring technicians or apprentices.

  DDC, Energy Management Systems, heavy machinery, company vehicle

17 companies