“lab test setups” jobs in Canada – Page 8

No matching filters. Try another name.

Results

• 1mo

  Sr Optical Firmware Integration Engineer

  Canada

  On-siteFull Time

  N

  Nokia

  3+ YOECandidates need 3 to 5 years of directly related experience in optical coherent firmware validation, strong Python skills, knowledge of CMIS and module hardware interfaces, and a graduate-equivalent degree.

  Python, optical test equipment

  1mo

  Staff Optical Firmware Integration Engineer

  Ottawa, ON

  On-siteFull Time

  N

  Nokia

  6+ YOENokia needs 6+ years of directly related experience and a graduate-equivalent degree. Candidates need deep knowledge of 400G/800G ZR/ZR+ coherent optics, CMIS, Python test automation, and optical module HW/SW interfaces.

  Optical test equipment, Python

  1mo

  Repair Engineer

  Ottawa, ON

  HybridFull Time

  N

  Nokia

  Candidates need a general understanding of repair centre test processes, electrical and optical test instruments, and engineering change notices. They also need data analysis, cost analysis and test bench management skills.

  Boundary scan, Flying probe, In-circuit test, Optical spectrum analyzer, Network analyzer, Traffic generator

• 1mo

  Co-op Winter 2027 – Systems Engineering – 4-8-Months

  Ottawa, ON

  $24.92–$33.23/hrHybridInternship

  

  General Dynamics Missions System International

  Candidates need current enrolment in a Canadian engineering or science program, plus strong problem-solving, technical writing and communication skills. Experience with third-party integration, testing concepts and AI/ML is an asset, and a Canadian government security clearance must be obtainable.

  Requirements management tools

  1mo

  Co-op Winter 2027 – Systems Engineering – 4-8-Months

  Cole Harbour, NS

  $24.92–$33.23/hrHybridInternship

  

  General Dynamics Missions System International

  Candidates need current enrolment in a Canadian engineering or science program, plus strong problem-solving, technical writing and communication skills. Experience with third-party integration, testing concepts and AI/ML is an asset, and a Canadian government security clearance must be obtainable.

  Requirements management tools

• 1mo

  Optical Engineer

  Ottawa, ON

  On-siteFull Time

  R

  Ranovus

  2+ YOECandidates need a Bachelor's or Master's in optical engineering, physics, electrical engineering or a related field, plus 2 to 5 years on optical systems or opto-electronic devices. Python or Matlab scripting, lab troubleshooting and strong written and verbal communication are also required.

  oscilloscope, network analyzer, spectrum analyzer, BERT, Python, Matlab

  1mo

  Senior Optical Technician

  Ottawa, ON

  On-siteFull Time

  R

  Ranovus

  5+ YOECandidates need a technician or technologist diploma or equivalent experience, plus 5 to 10 years of hands-on work in an R&D lab, advanced manufacturing, or photonics. Strong manual dexterity, careful documentation, and practical troubleshooting skills are required.

  Microscope, SMU, OSA, DAQ

  1mo

  Silicon Photonics Designer and Test Engineer

  Ottawa, ON

  HybridFull Time

  R

  Ranovus

  2+ YOECandidates need a Master's or PhD in Engineering Physics, Electrical Engineering, or a related field, plus at least 2 years of silicon photonics design and testing experience. Hands-on lab skills with optical fibers, probes, and polarization, plus MATLAB, Python, and Ansys Lumerical, are required.

  Ansys Lumerical, MATLAB, Python, optical fibers, electrical probes, polarization controllers

• 1mo

  SEM Manager

  Toronto, ON

  HybridFull Time

  

  Klick

  3+ YOECandidates need 3 to 6 years managing paid search with Google Ads and Microsoft Advertising, plus experience with the Editor tools and Excel. Regulated industry experience, or transferable experience with regulated advertising, is required.

  Google Ads, Microsoft Advertising, Google Ads Editor, Microsoft Advertising Editor, Microsoft Excel, Google Sheets

• 1mo

  Research Chemist (Drug Product) - Eurofins CDMO Alphora, Inc.

  Mississauga, ON

  $60k/yrOn-siteFull Time

  

  Eurofins

  3+ YOECandidates need a degree in chemistry, biochemistry or a related field and 3+ years in a pharmaceutical lab or manufacturing setting. They also need 2+ years of method transfer or validation experience and knowledge of GMP, GLP and Health Canada guidelines.

  Research, Good manufacturing practices, Onboarding, Provide technical documentation, Documentation, Regulatory compliance

• 1mo

  Clinical Systems Developer

  Mississauga, ON

  $75k–$120k/yrHybridFull Time

  

  Profound Medical: (NASDAQ:PROF) is a commercial-stage medical technology company based in Mississauga, Ontario, advancing the standard of care for prostate cancer and…

  5+ YOECandidates need a bachelor's degree in an engineering discipline and 5 or more years of experience troubleshooting complex electromechanical or electronic systems. Profound Medical also requires strong data analysis, root cause methods such as FMEA and fault tree analysis, and clear technical writing; regulated medical-device experience is preferred.

  oscilloscope, multimeter, Python, MATLAB

• 1mo

  R&D Lab & Testing Specialist - Mass Timber Hardware

  Surrey, BC

  On-siteFull Time

  

  My-Ti-Con Timber Connectors Inc. DBA MTC Solutions

  3+ YOECandidates need a relevant engineering technology or engineering diploma or degree, about 3+ years of structural or materials testing or lab experience (recent graduates considered), and strong hands-on mechanical aptitude. Familiarity with load frames, hydraulics, instrumentation, mass timber or connections, and strong project and documentation skills are assets.

  Load frame, Hydraulic systems, Actuators, Load cells, LVDT / displacement sensors, Data-acquisition system

• 1mo

  Materials Project Coordinator

  Vaughan, ON

  On-siteFull Time

  

  AllRock Consulting Limited: AllRock provides geotechnical engineering, materials testing and environmental engineering services.

  5+ YOE2+ MgmtCandidates need a civil or geotechnical technician or technologist diploma, at least 2 years of engineering or construction management experience, and experience managing a team. Strong organization, communication, technical writing skills and a valid driver's licence with a reliable vehicle are also required.

  Geotechnical engineering, Civil engineering, Manage a team, Scheduling, Attention to detail, Environmental legislation

• 1mo

  Engineering Process Technician

  Kirkland, QC

  On-siteFull Time

  

  Smiths Group

  Candidates need a DEC or technical diploma in mechanical engineering, physics engineering or a related field, plus manufacturing or process engineering experience. Mechanical drafting in SolidWorks and reading engineering drawings are needed, and French and English are required.

  SolidWorks

• 1mo

  CO2 Refrigeration Engineering Specialist

  Brantford, ON

  On-siteFull Time

  

  KeepRite Refrigeration: KeepRite Refrigeration, is the leading North American manufacturer of commercial refrigeration products that are designed and engineered to deliver…

  5+ YOECandidates need a mechanical engineering diploma or degree, 5+ years of commercial or industrial refrigeration experience, and deep knowledge of CO2 systems. They also need 2-D and 3-D CAD skills, Microsoft Office proficiency and strong written and verbal communication.

  CAD software, Microsoft Office

• 1mo

  OptoMechanical Engineer

  Sherbrooke, QC

  On-siteFull Time

  

  SBQuantum

  5+ YOECandidates need a bachelor's degree in mechanical engineering, engineering physics or a related field, with a background in optics. At least 5 years of precision optomechanical design is required, and experience taking products from prototype to manufacturing is essential.

  Zemax, Python

• 1mo

  Electronic Technician

  Laval, QC

  Full Time

  FU

  FLIR Unmanned Aerial Systems, ULC

  3+ YOECandidates need 3+ years of technician experience, a college diploma in electronics, and strong troubleshooting skills. They also need hands-on experience with RF and fine-pitch components, CAD tools, MS Office and SAP, and must be bilingual in French and English.

  CAD, SAP, MS Office, Test instruments

• 1mo

  Junior QA Engineer

  Ontario

  RemoteFull Time

  

  1Valet

  1+ YOECandidates need 1-2 years of QA experience or equivalent projects or lab coursework, plus a basic grasp of hardware, software and networking such as Wi-Fi, Ethernet and BLE. Hands-on work with physical hardware and basic bug-tracking tool experience are also required.

  Jira, TestRail, Wi-Fi, Ethernet, Lab equipment

• 1mo

  Technician

  Kelowna, BC

  Full Time

  UT

  UBC The University of British Columbia

  2+ YOECandidates need a postsecondary degree in civil or mechanical engineering and over 2 years of relevant experience. They must work independently, follow safety rules and train others.

  hydraulic testing machines, spectrophotometer, autoclave, centrifuge, analytical balance, muffle furnace

• 1mo

  Electro-Mechanical Engineering Intern (Fall 2026, 16 months)

  Toronto, ON

  $23–$30/hrHybridFull Time

  HR

  Hitachi Rail Canada Inc.

  Candidates need to be pursuing a bachelor's degree in mechanical, electrical or mechatronics engineering with at least two years completed. Hands-on CAD experience, strong problem-solving skills and high proficiency in MS Excel are required.

  AutoCAD, MicroStation, SolidEdge, CREO, LabVIEW, MATLAB

• 1mo

  [C] Salesforce Engineer / Developer

  Toronto, ON

  HybridPart Time

  ML

  Maple Leaf Sports & Entertainment Partnership

  Candidates need strong Salesforce administration and Apex/Lightning development experience, hands-on Loyalty Cloud or loyalty program experience, and integration skills with enterprise systems. Experience with CRM data migration and data quality is also expected.

  Salesforce, Salesforce Loyalty Cloud, Marketing Cloud, Data Cloud, MuleSoft

• 1mo

  Advanced Quality Specialist

  Penetanguishene, ON

  Full Time

  

  Techform, a Division of Magna Closures Inc.

  3+ YOECandidates need 3 to less than 5 years of related experience and a community college diploma or certificate, ideally in mechanical or quality engineering. A CQE certification and Tier I automotive experience are preferred.

  8D, PFMEA, BOM systems

• 1mo

  Quality Engineer

  Etobicoke, ON

  Full Time

  

  Magna International Inc.

  5+ YOECandidates need a community college diploma or post-secondary engineering education, 5-7 years of related experience, and preferably CQE certification and Tier 1 automotive experience.

  Inspection, Problem solving, Assembly, Procurement, Quality control systems, Process improvement

  1mo

  QUALITY ENGINEER

  Concord, ON

  Full Time

  

  Magna International Inc.

  5+ YOECandidates need 5 to 7 years of related experience and a post-secondary diploma or certificate in mechanical or quality engineering. Tier 1 automotive experience and CQE certification are preferred.

  8D reports, PFMEA, Workday

18 companies