“Rebar locator” jobs in Canada

No matching filters. Try another name.

Results

• 3d

  Talent Acquisition Specialist / Recruiter

  Grimsby, ON +1

  

  Salit Steel

  4+ YOECandidates need 4+ years of full-cycle recruiting, ideally in manufacturing or skilled trades, with experience running high-volume campaigns. Candidates should have proven direct-sourcing skills, Dayforce or other ATS experience, a valid driver's licence and a reliable vehicle.

  Dayforce, LinkedIn, job boards

  3d

  Estimating - Rebar Estimator

  Vaughan, ON +1

  

  Salit Steel

  3+ YOECandidates need 3 to 5 years of experience in estimating, construction, engineering or the rebar industry, plus strong math, drawing-reading and organizational skills. Familiarity with estimating software and Bluebeam Revu, and a post-secondary technology diploma, are assets.

  aSa estimating software, Bluebeam Revu

  4d

  IT Support Analyst

  Welland, ON

  

  Salit Steel

  2+ YOECandidates need a post-secondary diploma or degree in IT or Computer Science, or equivalent practical experience, with 2 to 4 years of help desk or technical support work. They should know Active Directory, Google Workspace, TCP/IP, DNS, DHCP, VPN and hardware troubleshooting, and be comfortable on an active industrial floor. A valid driver's licence is required.

  Active Directory, Google Workspace, Remote desktop tools, Ticketing system, Barcode label printers

  5d

  Assistant Health & Safety Manager

  Toronto, ON

  

  Salit Steel

  10+ YOESalit Steel needs candidates with 10+ years of H&S leadership in construction, steel fabrication or heavy industry, plus a post-secondary degree or diploma in OHS or a related field. Strong knowledge of WSIB, CNESST and crane/rigging safety standards, and excellent communication skills, are required.

  COR, ISNetworld, Avetta, ComplyWorks

• 3d

  Journeyperson Carpenter - NU

  Nunavut

  On-siteFull Time

  

  Penn-co Construction: Since the inception of the company, the Manitoba branch office and head office have been located in Blumenort.

  Candidates need Red Seal certification and must pass a criminal record and vulnerable sector check. Strong communication, team leadership, blueprint reading and math skills are required, along with experience or cultural respect for working with Indigenous communities and willingness to travel to remote sites.

  hand tools, power tools, rakes, screeds, trowels

• 4d

  Concrete Carpenter / Formsetter

  Manitoba

  $32–$42/hrFull Time

  AC

  Acme Concrete Contracting

  2+ YOECandidates need at least 2 years of concrete forming experience in Winnipeg or the prairies, their own basic hand tools, and a valid driver's licence. Being safety-minded, punctual and able to start early on pour days is required.

  plywood, lumber, stakes, snap ties, rebar, basic hand tools

• 4d

  Assistant Superintendent (Night Shift)

  Toronto, ON

  On-siteFull Time

  OT

  Ontario Transit Group

  8+ YOEOntario Transit Group needs candidates with post-secondary education in construction management or equivalent experience, and at least 8 years of civil construction experience as a superintendent, assistant superintendent or general foreman. Candidates should know construction disciplines, safety regulations, scheduling, cost control and engineering drawings, and have leadership experience supervising trades.

  Microsoft Word, Microsoft Excel, Microsoft Outlook

• 5d

  QA/QC Coordinator, Mechanical – Industrial West

  Edmonton, AB +4

  Full Time

  BI

  Bird Industrial Management Services Ltd.

  3+ YOEBird Industrial Management Services Ltd. asks for a Bachelor's degree or diploma in mechanical engineering or a related discipline and at least three years of quality control or civil construction experience. Candidates need knowledge of ASME, CSA and building codes, CSA A23.1/A23.2 is an asset, and they must be proficient in Bluebeam and Microsoft Office.

  Bluebeam, Microsoft Office

  5d

  QA/QC Coordinator, Electrical – Industrial West

  Edmonton, AB +4

  Full Time

  BI

  Bird Industrial Management Services Ltd.

  3+ YOEBird Industrial Management Services Ltd. needs candidates with a degree or diploma in electrical engineering or a related field and at least three years of quality control or civil construction experience. Candidates should know construction codes such as CSA A23.1/A23.2, ASME and the Building Code, and be skilled with Bluebeam and Microsoft Office.

  Bluebeam, Microsoft Office

  5d

  QA/QC Coordinator, Civil – Industrial West

  Edmonton, AB +4

  Full Time

  BI

  Bird Industrial Management Services Ltd.

  3+ YOECandidates need an engineering degree or diploma, at least three years of quality control or civil construction experience, and the ability to read civil drawings. Proficiency in Bluebeam and Microsoft Office, knowledge of CSA and ASME codes, and strong written and oral communication are also required.

  Bluebeam, Microsoft Office

• 5d

  Production Supervisor

  Dartmouth, NS

  

  Nucor Rebar Fabrication

  5+ YOE3+ MgmtCandidates need five to eight years of reinforcing steel fabrication or field experience, including at least three years as a supervisor. They must know OH&S industrial safety standards, have continuous improvement or project management experience, and communicate effectively.

  Navision, MIS

  5d

  Production Supervisor

  Dartmouth, NS

  

  Nucor Rebar Fabrication

  5+ YOE3+ MgmtCandidates need five to eight years of reinforcing steel fabrication or field experience, including at least three years as a supervisor. They must know OH&S industrial safety standards, have continuous improvement or project management experience, and communicate effectively.

  Navision, MIS

  6d

  Estimator

  Dartmouth, NS

  

  Nucor Rebar Fabrication

  3+ YOENucor Rebar Fabrication needs candidates with three years of rebar or structural steel detailing or equivalent construction estimating experience, knowledge of concrete structures and CRSI/ACI standards, and good communication and computer skills. A two-year drafting or construction diploma is preferred.

  6d

  Estimator

  Dartmouth, NS

  

  Nucor Rebar Fabrication

  3+ YOENucor Rebar Fabrication needs candidates with three years of rebar or structural steel detailing or equivalent construction estimating experience, knowledge of concrete structures and CRSI/ACI standards, and good communication and computer skills. A two-year drafting or construction diploma is preferred.

• 6d

  Senior Geotechnical Engineer - - PL#81213

  Greater Sudbury, ON

  $120k–$155k/yrFull Time

  

  Peter Lucas Project Management Inc.: Peter Lucas provides gold standard project delivery by investing in people, communities and cutting-edge technology.

  Candidates need a Bachelor's degree in an engineering discipline, a P.Eng. designation or eligibility for one, and significant senior experience in underground hard rock geotechnical work. They also need hands-on knowledge of ground support, cable bolts, Ontario Regulation 854, and the ability to work the rotation.

  Geotechnical engineering, Leadership, Regulatory compliance, Inspection, Quality assurance, Quality control

  6d

  Senior Geotechnical Engineer - - PL#81213

  Greater Sudbury, ON

  $120k–$155k/yrOn-siteFull Time

  

  Peter Lucas Project Management Inc.: Peter Lucas provides gold standard project delivery by investing in people, communities and cutting-edge technology.

  Candidates need a geotechnical or mining engineering degree, a P.Eng. designation or eligibility, and significant senior experience in underground hard rock ground control. They also need knowledge of Ontario Regulation 854, ground support systems and cable bolting, and the ability to work the rotation.

  resin rebar, split sets, cable bolts, shotcrete, mesh

• 6d

  Intermediate Structural Designer

  Calgary, AB

  

  TRI Innovations

  5+ YOECandidates need a technical diploma, at least five years of structural steel and concrete design experience, and experience creating 3D steel and concrete models. Fluency in Autodesk Navisworks and Bluebeam is required, with Advance Steel and rebar detailing as assets.

  Autodesk Advance Steel, Autodesk Navisworks, Bluebeam

• 7d

  Mechanized (MacLean) Bolter

  Quebec

  Full Time

  

  The Redpath Group: Established in 1962, The Redpath Group is an experienced, full-service solutions provider to the global underground mining industry.

  3+ YOECandidates need at least 2 years of mechanized bolting experience underground and 3 years as an underground miner. They also need an FMTM or Ontario Underground Hard Rock Mining Common Core, a General Explosives Permit, a valid driver's licence, and a high school diploma or equivalent.

  Mechanized bolting equipment, Resin rebar, Cable bolts, Swellex, Welded wire mesh

• 7d

  Project Engineer

  Surrey, BC

  $90k–$110k/yr

  A

  Aecon: (TSX: ARE) is a North American construction and infrastructure development company with global experience.

  5+ YOEAecon needs candidates with a Civil Engineering degree, five or more years of building construction experience, and skill reading construction and shop drawings. Strong estimating, safety and quality knowledge, Microsoft Office proficiency, and the ability to work at heights are also required.

  AutoCAD, Revit, Microsoft Excel, Microsoft Word, Microsoft Outlook

• 11d

  Formwork Carpenter

  Edmonton, AB

  $32.12–$38/hrFull Time

  

  Giusti Group of Companies

  5+ YOECandidates need 5+ years of formwork experience, including high-rise work with flying tables and core construction. They also need fall protection training, a high school diploma, journeyman carpentry or equivalent, and their own tools, vehicle and driver's licence.

  Saw, Level, Passload nail gun, Hand tools

• 13d

  Rebar Fabricator

  Bedford, NS

  $22.56–$27.58/hrFull Time

  

  OSCO

  Candidates need experience in a rebar shop using shear machines, bending machines and overhead cranes, plus strong math skills and the ability to read a tape measure. They must have their own transportation, communicate in English at an intermediate level, and handle heavy lifting up to 50 lbs.

  shear machine, bender machine, overhead crane, tape measure, wire, truck

• 13d

  Rebar Fabricator

  Bedford, NS

  $22.56–$27.58/hrFull Time

  EW

  Enterprise Wide

  Allstar Rebar needs candidates with prior rebar shop experience using shear machines, bending machines and overhead cranes. Candidates must have their own transportation, intermediate English, strong math and measurement skills, and the ability to lift up to 50 lbs and stand for long periods.

  shear machine, bender machine, overhead crane, tape measure, wire

• 13d

  Geotechnical Field Technician

  Brampton, ON

  $23–$28/hrOn-siteFull Time

  E

  EXP

  2+ YOECandidates need a diploma in civil, environmental engineering or earth sciences, at least two years of inspection and testing experience, and CCIL field concrete testing certification. A valid driver's licence and a reliable vehicle are also required.

  Soil density gauge

• 16d

  Estimation Administrator

  Ajax, ON

  Full Time

  

  Bird Construction Inc.: Bird is a Canadian construction and maintenance company providing a comprehensive scope offering and a diversified portfolio of services to…

  1+ YOECandidates need a diploma in administration or civil construction and at least 1 year of experience with construction tenders and proposals. Strong organization, relationship-building and attention to detail are needed to meet tight tender deadlines.

  HeavyBid, Ariba

15 companies