“Calibration devices” jobs in Canada – Page 2

No matching filters. Try another name.

Results

• 2d

  Equipment Engineer (Semiconductor & Photonic)

  Halifax, NS

  Full Time

  I

  Inpho

  3+ YOEInpho needs candidates with a bachelor's degree in electrical, mechanical, optical engineering or physics and 3 to 7+ years of hands-on experience with electro-optical test, pick and place or inspection equipment. Candidates need knowledge of lasers, optics, machine vision and electromechanical troubleshooting.

  Automated pick and place machines, Automated optical inspection (AOI) systems, Machine vision systems

  2d

  Senior Electro-Optical Validation Engineer

  Kanata, ON

  Full Time

  I

  Inpho

  8+ YOECandidates need 8+ years of hands-on high-speed electrical, RF or electro-optical experience, including IMDD and PAM4 testing and InP component validation. They also need strong Python or MATLAB data analysis skills, expertise setting up high-speed test equipment, and a degree in electrical engineering, engineering physics or a related field.

  Keysight, Anritsu, Python, MATLAB, Pandas, Plotly

  2d

  Junior Electro-Optical Validation Engineer

  Kanata, ON

  Full Time

  I

  Inpho

  Candidates need a Bachelor's or Master's degree in electrical engineering, engineering physics, or a related field, with 0 to 2 years of experience. Python skills for data analysis and automation are required, and exposure to lab instruments, S-parameters, and semiconductor devices is an asset.

  Python, Pandas, NumPy, Plotly, Matplotlib, Oscilloscope

• 2d

  Electrical and Instrumentation Specialist

  Calgary, AB

  Contract

  TO

  Tourmaline Oil Corp

  10+ YOECandidates need dual journeyperson certification as an Electrician and an Instrumentation and Controls Technician, at least 10 years of electrical and instrumentation experience (oil and gas preferred), and experience coordinating contractor crews. Strong knowledge of electrical codes and AER regulations is required.

  SharePoint, MarsWorks, Cygnet, ComplyWorks

• 2d

  Maintenance Technician

  Bolton, ON

  Full Time

  AE

  Agrocrop Exports Ltd.

  Candidates need hands-on manufacturing experience with electrical and mechanical systems and strong troubleshooting skills. An electrician licence and PLC and HMI troubleshooting and programming skills are required, and the ability to read schematics and blueprints is needed.

  PLC, HMI, MS Word, MS Excel, MS Outlook

• 2d

  Instrumentation & Control Technician

  Montréal, QC

  Full Time

  TP

  The People Co.

  5+ YOECandidates need a bachelor's degree in mechanical, electrical or manufacturing engineering or a related field, plus over five years of relevant experience. They must read electrical schematics and P&IDs, work in Ladder Logic and FBD, know industrial networks such as Ethernet/IP, and be fluent in French and English.

  Allen-Bradley PLC, HMI, SCADA, Ethernet/IP

• 2d

  Electrical and Automation Engineer

  Kingston, ON

  Full Time

  CR

  Canada Royal Milk

  5+ YOECandidates need a bachelor's degree in electrical engineering and 5+ years in a manufacturing environment. They must read schematics and program PLCs in Rslogix5000 and Wonderware, and have instrumentation calibration and project management experience. A P.Eng. is an asset.

  Rslogix5000, Wonderware, Siemens, CMMS, VFD, PLC

• 2d

  Automated Visual Inspection & Instrumentation Specialist – Pharmaceutical Manufacturing

  Montréal, QC

  Full Time

  EF

  Efor (formerly PharmEng Technology)

  Candidates need an engineering, automation or instrumentation diploma or degree and hands-on experience with automated visual inspection, ideally in pharma or medical devices. Machine vision knowledge, GMP experience and validation documentation skills are required.

  Körber/Seidenader AVI platforms, Machine vision cameras and optics

• 2d

  Analog Validation & Characterization Engineer

  Montréal, QC

  Full Time

  H

  HaiLa

  5+ YOECandidates need a BS or MS in electrical engineering or a technologist diploma with equivalent experience, plus 5+ years in analog, RF or mixed-signal test and validation. They must have PCB bring-up, RF matching-network tuning, SCPI instrument automation in Python, and PVT characterization experience.

  Analyseurs de réseaux, Analyseurs de spectre, Analyseurs de protocoles, Oscilloscopes, Alimentations, Multimètres de précision

  2d

  Analog Validation & Characterization Engineer

  Ottawa, ON

  Full Time

  H

  HaiLa

  5+ YOECandidates need 5+ years of analog, RF or mixed-signal test and validation experience, plus a BS/MS in electrical engineering or a technologist diploma with equivalent experience. Strong Python, SCPI instrument control, PCB bring-up and PVT characterization skills are required.

  network analyzer, spectrum analyzer, protocol analyzer, oscilloscope, signal generator, precision DMM

• 2d

  Electrical Journeyman with Instrument experience

  Fort St. John, BC

  Full Time

  EI

  Epscan Industries Ltd.

  3+ YOECandidates need a Journeyman Electrical Red Seal certification, a valid driver's licence and three or more years of oilfield industrial experience. They must hold CSO, Intermediate First Aid and H2S Alive training and work safely alone on live equipment.

  Instrumentation test equipment, Hart communicator, PLC, RTU, Pressure, level and temperature transmitters, VFD

• 2d

  Principal Analog/Mixed-Signal IC Design Engineer

  Vancouver, BC

  Full Time

  SI

  Stathera, Inc.

  12+ YOECandidates need an MS with 12+ years of relevant experience or a PhD with 8+ years of industry experience designing analog and mixed-signal circuits. They must have led full-chip designs through multiple tape-outs and know analog blocks such as bandgaps, PLLs, data converters and switched-capacitor circuits.

  Cadence Virtuoso, Synopsys Custom Compiler, Spectre, HSPICE, AFS, MATLAB

• 2d

  EIC Measurement Technician

  Canada

  Full Time

  TP

  TransCanada PipeLines Limited

  2+ YOECandidates need a high school diploma and either three years of an applicable trades program or two years of technical training plus two years of relevant experience. A valid Class 5 licence, a clean pre-employment medical and drug screening, and strong troubleshooting and communication skills are required.

  SAP, PLC, flow computer, gas chromatograph, gas quality analyzer, transmitter

• 2d

  Biomedical Equipment Technologist

  Edmonton, AB

  

  MIC Medical Imaging: Saskatchewan, Grey Nuns, Mazankowski Heart Institute, Royal Alexandra, Stollery Children’s, Strathcona Community, Sturgeon General, Leduc Community…

  2+ YOEMIC Medical Imaging needs candidates with at least 2 years of diagnostic imaging service experience and electronics training. Strong troubleshooting, communication and documentation skills are required, and a valid driver's licence with a reliable vehicle is mandatory.

  PACS, DICOM, test equipment, hand tools

• 2d

  Field Service Engineer / Calibration Specialist

  Toronto, ON

  Full Time

  OT

  O'Hara Technologies Inc.

  6+ YOECandidates need 6+ years of servicing oral solid dosage equipment, calibration experience in a cGMP environment, and the ability to read electrical and pneumatic schematics. A technical diploma or certification in mechanical, electrical or instrumentation technology, or equivalent experience, is required.

  PLC, HMI, VFD, hand tools, power tools

• 2d

  PCB Design Engineer II

  Markham, ON

  Contract

  T

  TekWissen ®

  3+ YOECandidates need an electronics engineering technology diploma or equivalent practical experience, typically 3 to 5 years in board-level troubleshooting or rework. They must show hands-on microscope soldering and fine-pitch BGA skills, and be comfortable with oscilloscopes, multimeters and power supplies.

  BGA rework station, Hot-air rework tool, Board preheater, Microscope, Oscilloscope, Digital multimeter

• 2d

  Operator - 2

  Dundalk, ON

  

  Midwest co-operative services

  3+ YOECandidates need a high school diploma, a Class DZ or AZ driver's licence, and at least 3 years of driving experience, and must be 25 or older. Strong safety focus, attention to detail, customer service skills, and the ability to lift up to 25 kg are required.

  Straight truck, Sprayer, Forklift, Payloader, Skid-steer

• 3d

  Lead Analog Layout Engineer

  Ottawa, ON

  $142k–$226k/yrRemoteFull Time

  CC

  Ciena Canada ULC

  5+ YOECandidates need a Bachelor's degree or higher in Electrical Engineering or a related field and 5+ years of custom analog or mixed-signal IC layout experience, including completed tapeouts. Ciena requires hands-on skill with Cadence Virtuoso and Siemens Calibre, plus knowledge of matching, parasitics and deep-submicron CMOS.

  Cadence Virtuoso, Siemens Calibre, Ansys Totem

• 3d

  Electrician

  Arthur, ON

  $42.76/hrFull Time

  PF

  Piller's Fine Foods

  2+ YOECandidates need an electrician licence (442A or 309A) and 2-3 years of experience in a manufacturing facility. They must know PLC, HMI and control systems, read and design electrical schematics, and work with minimal supervision.

  PLC, HMI, robot

• 3d

  Maintenance Technician

  Halton Hills, ON

  $31–$44/hrOn-siteFull Time

  S

  Signode

  5+ YOECandidates need an electrical apprenticeship or vocational certificate in electricity and five years of hands-on electrical experience, including automation control panels and PLCs. They must know the National Electrical Code and read wiring diagrams and gauges.

  PLC, Hand and power tools, Diagnostic equipment, Testing instruments, Scissor lift

• 3d

  Outage Technician/Technologist

  Tiverton, NS

  

  Kinectrics: Kinectrics is an integrated lifecycle management services company providing testing, inspection, certification and engineering consulting for the…

  5+ YOECandidates need engineering technology education (three years at a college) and about five years of related experience, or equivalent advanced education. They need knowledge of mechanical systems, machine design, electricity, and quality assurance, plus travel to nuclear sites and the ability to obtain a security clearance.

  Microsoft Office, Visual inspection equipment, Motion control hardware, Instrumentation

• 3d

  Logistics Support Person (Full-Time)

  Thunder Bay, ON

  

  City of Thunder Bay

  2+ YOECandidates need a certificate in supply management and two years of warehouse or logistics experience. A valid Class G Ontario driver's licence and the City's definition of a competent driver are also required, along with strong analytical, organizational and problem-solving skills.

  Vaccine fridge, Point of care testing equipment, BP monitors, Glucometers, Weight scales, Thermometers

• 3d

  Quality Inspector in Oakville

  Oakville, ON

  $23–$25/hrOn-siteFull Time

  

  Thermon: Through its global network, Thermon provides safe, reliable and innovative mission critical industrial process heating solutions.

  Candidates need a high school diploma or equivalent, good communication skills, and the ability to read electrical and mechanical drawings and inspection test plans. They also need metrology skills with measuring tools such as calipers and micrometers, and comfort with fractions and metric measurements.

  Vernier calipers, Micrometers, Tape measure, Gauges, Measuring instruments

• 3d

  AMS Design Verification Engineer

  Mississauga, ON

  S

  Synopsys

  5+ YOESynopsys needs candidates with a degree in electrical or computer engineering and strong knowledge of analog and mixed-signal circuits. Candidates should know SystemVerilog and UVM, have used AMS simulation tools, and be comfortable scripting in Python, Perl or shell.

  HSPICE, XA, CustomSim, VCS, SystemVerilog, UVM

21 companies