“Precision assembly equipment” jobs in Canada – Page 2

No matching filters. Try another name.

Results

• 13h

  Hardware Technician

  Mississauga, ON

  Full Time

  SB

  Sharp Brains

  2+ YOECandidates need 2 to 4 years of hands-on HVAC or AC technician experience, including electrical troubleshooting and refrigerant circuit knowledge. Diagnostic tools such as multimeters and manifold gauges, and the ability to read wiring diagrams, are expected.

  multimeter, clamp meter, pressure gauges, manifold gauge sets, vacuum pumps, refrigerant recovery equipment

• 13h

  Production Welder

  Abbotsford, BC

  Full Time

  OM

  Overlanders Manufacturing LP

  2+ YOECandidates need at least 2 years of MIG welding experience in a production or manufacturing setting, the ability to read blueprints and technical drawings, and knowledge of welding techniques and safety. MIG certification is preferred, and the work requires lifting up to 40 lbs repeatedly.

  MIG welder, welding equipment

• 13h

  Responsable des revenus hôteliers

  Montréal, QC

  Full Time

  GH

  Groupe Hôtelier & Immobilier Tidan

  3+ YOETidan requires at least 3 years of hotel revenue management experience, solid knowledge of PMS, RMS, CRS, GDS and OTA systems, and strong Excel skills. Candidates must be analytical, able to explain data simply, and fluent in both French and English.

  Duetto, Opera Cloud, PMS, CRS, RMS, GDS

• 13h

  Tool & Die Maker (New Die Builds)

  Mississauga, ON

  Full Time

  MM

  MTD Metro Tool & Die Ltd

  5+ YOECandidates need a certified licensed Tool & Die Maker credential and at least 5 years of building new dies in stamping or metalworking. They need strong knowledge of die construction, precision fitting and measurement, and the ability to read blueprints and work to tight tolerances.

  Micrometers, Calipers, Gauges, Conventional metal-cutting machinery

• 13h

  General Labourer - Floater (2nd Shift)

  Ontario

  Full Time

  OE

  OSI Electronics

  Candidates need a high school diploma (desired), some electronics manufacturing or fast-paced warehouse experience (desired), good manual dexterity for small components, and the ability to stand, bend, squat and lift up to 25 lbs for long periods. Strong English communication and a team-oriented attitude are required.

  Die-cut equipment, Spartanics punching equipment, Nose pliers, Tweezers, Picking tools

• 13h

  Production Assembly Technician

  Markham, ON

  Full Time

  MC

  Manufacturing Co.

  Candidates need strong manual dexterity, hand-eye coordination and attention to detail to work with very small parts and follow written procedures exactly. Hand soldering, microscope use and 6 to 12 months of precision assembly experience are assets, and ISO 13485 knowledge is an asset.

  Soldering iron, Microscope, Magnification tools, Adhesives

• 13h

  Spécialiste, Développement de formations numériques

  Montréal, QC

  Full Time

  C

  CAE

  3+ YOEAu moins 3 ans d'expérience en développement de didacticiels ou conception pédagogique; Maîtrise de Microsoft Office et des applications Adobe Creative Cloud; Expérience avec Articulate Storyline et Rise

  Microsoft PowerPoint, Microsoft Office, Adobe Photoshop, Adobe InDesign, Adobe Illustrator, Adobe Premiere Pro

• 13h

  Optoelectronic Engineer

  Ottawa, ON

  Full Time

  S

  Sanmina

  6+ YOECandidates need at least 6 years of direct optical product design experience, expertise from concept through qualification (ideally through volume manufacturing), and proven technical leadership on high-performance teams. A graduate degree in science or engineering is preferred, and strong written and verbal communication is required.

  optical alignment equipment, flip chip assembly equipment, UV curing equipment

• 13h

  Débosseleur | Dent Removal

  Dollard-Des Ormeaux, QC

  Full Time

  DG

  Dilawri Group of Companies

  Carte de compétence du Comité Paritaire de l'Automobile; Permis de conduire valide et bon dossier; Conduite de véhicules manuels et automatiques

  marteaux, tasseaux, équipements de traction et d'ancrage, appareils de soudure

• 13h

  Journaliste, Unité d'enquête de l'Atlantique (Services anglais)(poste en présentiel)

  Moncton, NB

  Full Time

  C

  CBC/Radio-Canada

  3+ YOECandidates need a bachelor's degree and at least three years of journalism experience, strong writing and investigative skills, knowledge of CBC/Radio-Canada's journalistic standards and media law, and a valid driver's licence. Advanced spoken and reading English and intermediate written English are required.

• 13h

  Mechanical Drafter

  Langley, BC

  Full Time

  SP

  SCG Process

  Candidates need a diploma or certificate in a mechanical technology or drafting program and experience with SolidWorks. Machine shop, pump, 3D scanning, portable CMM and DraftSight or AutoCAD experience are preferred.

  SolidWorks, 3D scanner, Portable CMM, Geomagic Design X, DraftSight, AutoCAD

• 13h

  Sr. Product Development Engineer - Mechanical Design For Liquid Cooling

  Markham, ON

  Full Time

  AC

  Amphenol Communications Solutions

  7+ YOECandidates need a Mechanical Engineering or related bachelor's degree and 7+ years of hands-on mechanical design and product development. Strong 3D CAD skills (Creo or SolidWorks), GD&T knowledge, and troubleshooting and prototype experience are required. Liquid cooling experience is helpful but not required.

  Creo, SolidWorks, ANSYS

• 13h

  Adjuster-Assembler (Grinding-Finishing Operator) - Weekend Day Shift

  Mirabel, QC

  Full Time

  

  Safran

  Safran needs candidates with a DEP in aeronautical structure assembly or a DES with relevant experience, plus hands-on pneumatic tool work in manufacturing. Experience in grinding or aeronautics assembly is an asset, along with reading mechanical drawings and using calipers and micrometers.

  Pneumatic hand tools, Semi-automatic grinding equipment, Lathe, Calipers, Micrometers

  13h

  Adjuster-Assembler (Honing-Finishing Operator) - Weekend Day Shift

  Mirabel, QC

  Full Time

  

  Safran

  Safran Landing Systems needs a DEP in aeronautical structure assembly, or a DES with relevant experience, plus hands-on work with pneumatic tools in manufacturing. Candidates must read mechanical drawings, use calipers and micrometers, and work with precision and attention to detail.

  Pneumatic hand tools, Semi-automatic honing equipment, Lathe, Calipers, Micrometers

• 14h

  Manufacturing Engineer

  Brossard, QC

  Full Time

  MM

  Malach Metal & Machining

  Candidates need strong skills in reading engineering drawings and GD&T, plus solid knowledge of metal fabrication processes such as laser cutting, forming, machining and welding. Hands-on problem-solving, CAD work and comfort working directly with production teams are also expected.

  CAD, press brake, welding equipment

• 14h

  Production Planner

  Calgary, AB

  Full Time

  DS

  Dynamic Source Manufacturing Inc.

  5+ YOECandidates need at least 5 years of master scheduling, demand or production planning in electronics manufacturing, plus a bachelor's degree or equivalent experience. Advanced ERP/MRP knowledge and strong forecasting and analytical skills are required; APICS/ASCM CPIM or CSCP is an asset.

  ERP, MRP

• 14h

  Menuisier (temporaire)

  Granby, QC

  Full Time

  GZ

  Granby Zoo

  2+ YOECandidates need a DEP in carpentry-joinery and two years of relevant carpentry experience. CCQ competency cards are an asset, and the work requires manual dexterity, attention to detail, working alone or in a team, and comfort working at height.

• 14h

  CNC Mac

  Cambridge, ON

  Full Time

  RE

  Rapid EDM And Manufacturing Inc.

  1+ YOERapid EDM And Manufacturing Inc. needs candidates with 1 to 3 years of machining experience, skill with CNC programming and machine operation, and experience machining tool steels and aluminum or copper alloys. Forklift operation, mechanical troubleshooting and familiarity with hand tools are also needed.

  CNC mill, CNC grinder, Mastercam, SolidWorks, calipers, micrometers

• 14h

  Computer Numerical Control Operator

  Mississauga, ON

  Full Time

  GM

  Gegal Machine Tools Inc.

  Candidates need experience operating CNC equipment, especially turning and milling, plus skill with measuring tools like calipers and micrometers. They must read engineering drawings and show attention to detail and safety. A machining diploma or certificate is preferred, but equivalent practical experience is accepted.

  CNC machines, Calipers, Micrometers, Gauges

• 14h

  01. SOUDEUSE OU SOUDEUR

  Sorel-Tracy, QC

  Full Time

  LC

  L'Orienthèque, centre d'orientation et services d'intégration de la main-d'oeuvre

  2+ YOECandidates need a DEP in welding-assembly or an equivalent recognized credential, at least 2 years of welding experience in a manufacturing setting, and strong skill reading plans and welding symbols. MIG/TIG and FCAW proficiency is required, and a CWB certification is an asset.

  MIG, TIG, FCAW

• 14h

  Photonics Engineer, R&D

  Vancouver, BC

  Full Time

  DP

  Dream Photonics Inc.

  3+ YOECandidates need an engineering or physics bachelor's degree, 3+ years designing photonic components, and lab or R&D experience with photonic chips, lasers and optical fibre. They should know Python, electromagnetic simulation (FDTD, beam propagation, ray tracing) and GDSII layout tools with foundry PDKs.

  Python, KLayout, L-Edit, GDSII, FDTD, optical power meter

• 14h

  Machinist and Welder

  Varennes, QC

  Full Time

  PI

  Plasmionique Inc.

  Candidates need practical experience on conventional milling machines and lathes and the ability to make quality welds. They must read technical drawings and blueprints, understand tolerances, and work well both alone and within a team.

  milling machine, lathe, welding equipment, SolidWorks

• 14h

  Factory assembler, wood products

  Saint-Pacôme, QC

  Full Time

  SC

  Structure CD

  1+ YOECandidates need a high school certificate and 1 to 2 years of experience, ideally on an assembly line or in truss manufacturing. They should be comfortable with power tools, overhead cranes and precision measuring tools, and be detail-oriented, reliable and able to work in a team.

  Power tools, Pneumatic devices, Overhead crane, Precision measuring instrument, Small hand tools

• 14h

  Manual machinist

  Picture Butte, AB

  Full Time

  KM

  KalRob Machining

  2+ YOECandidates need 2 to 3 years of machining experience, the ability to read blueprints and calculate tolerances, and a high school certificate. Strong attention to detail and clear written and oral communication are also needed.

  micrometers, calipers, conventional machine tools

23 companies