“electronic schematics” jobs in Canada – Page 2

No matching filters. Try another name.

Results

• 1d

  Electronics Technician

  Vancouver, BC

  On-siteFull Time

  

  Sanctuary AI

  Sanctuary AI needs a diploma in electronics or equivalent practical experience, with hands-on PCB assembly and fine-pitch rework under a microscope. Candidates must read schematics and wiring diagrams and know IPC workmanship standards; EPLAN, Altium and test fixture experience are assets.

  Altium Designer, EPLAN, multimeter, oscilloscope, microscope

• 1d

  Automation Maintenance Technician

  Johnstown, ON

  Full Time

  GW

  G.T. Wholesale Limited

  1+ YOEGiant Tiger needs candidates with at least one year of experience with mechanical automation systems, strong electro-mechanical skills and PLC troubleshooting ability. An associate degree or equivalent certification in electronics, automation or manufacturing is preferred, along with reliable attendance and a commitment to safe work.

  PLC, CMMS, advanced test equipment, robotic arms, robotic vehicles, Unistrut

• 1d

  Intermediate Technician – Radio Frequency

  Sainte-Anne-de-Bellevue, QC

  Full Time

  

  MDA

  2+ YOECandidates need a college diploma in electromechanical, electrotechnical or electronic engineering, 2 to 5 years of relevant experience, and fluent spoken and written French. Knowledge of English is an asset. Successful candidates must obtain and hold reliability security clearance and pass the Controlled Goods Program assessment.

  PROM, FPGA

• 1d

  Industrial Electrician (Red Seal)

  Calgary, AB

  

  adecco

  5+ YOECandidates need a Red Seal journeyman certificate and at least 5 years as a licensed industrial electrician. Strong PLC, automation and blueprint-reading skills are needed, and industrial plant experience is preferred.

  PLC, blueprints, schematics, wiring diagrams

• 1d

  Analog Electronics Engineer

  Edmonton, AB

  HybridFull Time

  

  G2V Optics: G2V currently provides technology solutions to world-leading researchers, Fortune 500 technology firms, and aerospace companies in over 40 countries.

  3+ YOEG2V Optics needs candidates with a bachelor's degree, about three years of electronics product development experience, and analog circuit skills. They should also know SPICE, PCB design, IPC standards, bench testing and embedded C/Python.

  KiCAD, Altium, LTspice, PSpice, bench test equipment, git

• 1d

  Data Center Associate

  Pointe-Claire, QC

  $22/hr

  D

  DSV

  1+ YOECandidates need a high school diploma and 1 to 3 years of material handling, warehouse or data center experience. They should be comfortable with computers and warehouse systems, follow technical drawings, and know electrical safety and ESD practices.

  Warehouse management system, Hand tools, Power tools, Laser measuring devices, Electric pallet jack, Straddle stacker

• 1d

  Mechanic (310T Truck and Coach Technician) – 3 Vacancies

  Ontario

  On-siteFull Time

  BC

  BURL City of Burlington

  Candidates need a valid 310T Truck and Coach Mechanics Certificate and a valid Class G driver's licence with an acceptable abstract, plus the ability to obtain a Class C or B licence with Z air brake endorsement. They must bring their own complete set of hand tools and a toolbox, and be skilled with diagnostic tools and wiring schematics.

  Diagnostic tools, Wiring schematics, Hand tools

• 1d

  Industrial Foreman

  Edmonton, AB

  

  Sureway Construction Group: Sureway, established in 1973 by founder and President, Dennis O’Rourke, is one of Alberta’s largest privately owned civil construction general…

  5+ YOECandidates need 5 to 10 years of underground, tank foundation or earthworks experience and previous supervisory experience. They must be proficient with CAT E.T., S.I.S., Komatsu, Prosis and Service Advisor, and read hydraulic and electronic schematics.

  CAT E.T., S.I.S., Komatsu, Prosis, Service Advisor

  1d

  Component Rebuild Heavy Equipment Technician (Heavy Duty Mechanic) – Off Road (Journeyperson)

  Edmonton, AB

  Full Time

  

  Sureway Construction Group: Sureway, established in 1973 by founder and President, Dennis O’Rourke, is one of Alberta’s largest privately owned civil construction general…

  5+ YOESureway Construction Group needs a Red Seal Off Road journeyperson with 5 to 10 years of experience and off-road experience. Candidates must also have CAT E.T., S.I.S. or Komatsu component experience and be able to read hydraulic and electronic schematics.

  CAT E.T., S.I.S., Hand tools

  1d

  Field Foreman HET Off-Road (Journeyperson)

  Edmonton, AB

  Full Time

  

  Sureway Construction Group: Sureway, established in 1973 by founder and President, Dennis O’Rourke, is one of Alberta’s largest privately owned civil construction general…

  5+ YOESureway Construction Group needs a Red Seal Journeyperson Heavy Equipment Technician with 5 to 10 years of experience, including off-road work and CAT E.T., S.I.S. and Komatsu experience. Candidates must read hydraulic and electronic schematics and keep work organized and clean.

  CAT E.T., S.I.S., Komatsu diagnostic software, hydraulic schematics, electronic schematics, hand tools

  1d

  Field Technician HET Off-Road (Journeyperson, 3rd & 4th year)

  Edmonton, AB

  Full Time

  

  Sureway Construction Group: Sureway, established in 1973 by founder and President, Dennis O’Rourke, is one of Alberta’s largest privately owned civil construction general…

  5+ YOECandidates need a Red Seal Off-Road journeyperson certificate (or equivalent) and 5 to 10 years of journeyperson experience, with off-road and CAT E.T., S.I.S. and/or Komatsu experience required. Third and fourth year apprentices will also be considered.

  CAT E.T., S.I.S., Komatsu diagnostic software, CAT scrapers, hand tools

  1d

  Field Technician HET On-Road (Journeyperson)

  Edmonton, AB

  Full Time

  

  Sureway Construction Group: Sureway, established in 1973 by founder and President, Dennis O’Rourke, is one of Alberta’s largest privately owned civil construction general…

  Candidates need a Journeyperson HET (Truck and Transport) certificate, experience on heavy trucks and trailers, and engine rebuild and performance software experience. A valid driver's licence and a reliable personal vehicle are also required.

  hand tools, diagnostic software, hydraulic and electronic schematics, service truck

  1d

  Heavy Equipment Technician (Heavy Duty Mechanic) – Off Road (Journeyperson)

  Edmonton, AB

  Full Time

  

  Sureway Construction Group: Sureway, established in 1973 by founder and President, Dennis O’Rourke, is one of Alberta’s largest privately owned civil construction general…

  5+ YOECandidates need Red Seal Off Road journeyperson status, 5 to 10 years of experience, and off-road experience. Experience with CAT ET, SIS or Komatsu is required, plus skills reading hydraulic and electronic schematics.

  CAT ET, Komatsu diagnostic software, hand tools, steel toed boots

  1d

  Shop Foreman – Heavy Equipment Technician

  Edmonton, AB

  Full Time

  

  Sureway Construction Group: Sureway, established in 1973 by founder and President, Dennis O’Rourke, is one of Alberta’s largest privately owned civil construction general…

  5+ YOE5+ MgmtCandidates need a Red Seal Off-Road Journeyperson Heavy Equipment Technician certificate, 5 to 10 years of journeyperson experience and 5 years of supervisory experience. Off-road experience and proficiency with CAT ET, SIS, Komatsu, Prosis and Service Advisor are required.

  CAT ET, SIS, Komatsu, Prosis, Service Advisor

• 1d

  Electrician

  Toronto, ON

  $38.93–$39.80/hrOn-siteContract

  UH

  University Health Network: University Health Network (UHN) is Canada's largest research hospital, which includes Toronto General and Toronto Western Hospitals, Princess…

  5+ YOECandidates need an electrician apprenticeship (5 years, 9,000 hours), a Construction and Maintenance Electrician License 309A, and 5 to 8 years of practical experience. They also need good math, strength, manual dexterity, colour vision, and the ability to read blueprints, schematics and the Electrical Code.

  blueprints, electrical schematics, Electrical Code Book

• 1d

  Senior/Intermediate Electrical Engineer

  Calgary, AB

  Full Time

  

  Vista Projects Limited: Vista Projects is an integrated industrial engineering firm that helps clients navigate the digital transformation of their projects and operations.

  7+ YOECandidates need at least seven years of progressive oil and gas facilities engineering experience, a bachelor's or master's in engineering, and P.Eng. registration with APEGA. They should know electrical codes and standards, be able to prepare load, voltage drop and cable calculations, and be skilled in ETAP or SKM.

  ETAP, SKM, Microsoft Word, Microsoft Excel

• 1d

  Mixed-Signal and High-Power Designer

  Georgetown, ON

  $82k/yrFull Time

  

  Communications and Power Industries, Inc.

  4+ YOECandidates need a bachelor's degree in an electrical or related engineering field, at least four years of electronic systems experience including three years of mixed-signal and power-electronics design, and proficiency with Altium Designer and SPICE simulation. Experience with X-ray or solid-state RF systems is preferred.

  Altium Designer, SPICE, MATLAB, Simulink, Azure DevOps

• 1d

  Security Systems Technician

  Montréal, QC

  Full Time

  

  Vanier College

  Candidates need hands-on experience with electronic access control, commercial locksmithing and security electronics, plus knowledge of Quebec construction and safety codes. Candidates must also be able to troubleshoot networked systems and work with contractors and project managers.

  Access control software, NVR/server, Key cutting equipment

  1d

  Security Systems Technician

  Montréal, QC

  Full Time

  

  Vanier College

  Candidates need hands-on experience with electronic access control, commercial door hardware and locksmithing, plus knowledge of CCTV and alarm systems. Knowledge of the Quebec Construction Code and Quebec Safety Code is expected, and French is required for this Quebec college role.

  Access control software, NVR, CCTV, Intrusion panels, Key cutting equipment

• 2d

  Custom IC Layout Engineer

  Kanata, ON

  Full Time

  I

  Inpho

  2+ YOECandidates need a college diploma or above and at least 2 years of hands-on IC layout experience, ideally in analog, RF or mixed-signal. They need working knowledge of CMOS, BiCMOS and SiGe, and proficiency in Cadence Virtuoso or Keysight ADS layout.

  Cadence Virtuoso, Keysight ADS, Calibre, Assura, PVS

  2d

  Senior/Principal Custom IC Layout Engineer

  Kanata, ON

  Full Time

  I

  Inpho

  7+ YOECandidates need 7+ years of CMOS, BiCMOS, or SiGe layout experience, including high-speed or RF work and ESD layout. Proficiency in Cadence Virtuoso or Keysight ADS, plus Calibre, Assura, or PVS, is required.

  Cadence Virtuoso, Keysight ADS, Calibre, Assura, PVS

• 2d

  Principal Power Electronics Architect

  Montréal, QC

  Full Time

  ST

  SmartD Technologies

  10+ YOECandidates need 10+ years of power electronics experience with system-level ownership of kW-range inverters, converters or drives. They must have hands-on SiC or GaN design experience, shipped products at volume, a certification campaign carried through redesigns, and field failure root-cause experience. Fluency in worst-case analysis, derating, loss and thermal modeling, and control-loop interaction is required.

  SPICE

• 2d

  HARDNESS SERVICE AND CALIBRATION TECHNICIAN

  Whitby, ON

  Full Time

  OS

  Opti-Tech Scientific Inc.

  2+ YOECandidates need at least 2 years of hardness testing experience, knowledge of ASTM and ISO standards and ISO/IEC 17025:2017, and a technical diploma is preferred. A valid driver's licence, clean driving record and passport are required, along with strong customer service skills.

  Rockwell testers, Brinell testers, Vickers testers, Leeb portable testers, MS Office, Excel

• 2d

  Heavy Equipment Mechanic 421A

  Guelph, ON

  $35–$45/hr

  T

  TalentSphere

  5+ YOECandidates need a 421A licence, at least 5 years of relevant industry experience, and the ability to read electrical and hydraulic schematics. Strong hydraulic, electric and electronic knowledge, sharp diagnostic skills and comfort using a computer daily are also required.

  Diagnostic software, Mobile repair truck

16 companies