“rigging tools” jobs in Canada – Page 27

No matching filters. Try another name.

Results

• 1mo

  Event Rigger - Edmonton- Part Time

  Edmonton, AB

  Part Time

  

  Encore Global: A leading global event production company with unmatched technical expertise and a hospitality-first approach.

  Candidates need a high school diploma or equivalent, 500+ hours of onsite rigging experience, Qualified-Basic Rigging and Lift certifications, and experience with lift operation, ground rigging and high rigging without harness.

  Chain hoist, Motors, Truss, Personnel lift, Cable picks

  1mo

  Rigging Specialist- RBC Convention Centre Winnipeg

  Winnipeg, MB

  Full Time

  

  Encore Global: A leading global event production company with unmatched technical expertise and a hospitality-first approach.

  3+ YOECandidates need at least 3000 hours of onsite rigging experience and previous experience supervising a rigging team. Lift certification, ground rigging experience and load calculation skills are also required, with rigging certifications and CAD experience preferred.

  motors, truss, spanset, personnel lifts, CAD

  1mo

  Gréeur (Rigger)- temps partiel

  Québec, QC

  Part Time

  

  Encore Global: A leading global event production company with unmatched technical expertise and a hospitality-first approach.

  Plus de 500 heures d'expérience en gréage sur site; Certification de base en gréage (Qualified Basic Rigging); Certification en levage

  Ponts (truss), Moteurs à chaîne, Treuil, Plates-formes élévatrices, Câbles

  1mo

  Gréeur (Rigger)- temps partiel

  Montréal, QC

  Part Time

  

  Encore Global: A leading global event production company with unmatched technical expertise and a hospitality-first approach.

  Plus de 500 heures d'expérience en gréage sur site; Certification de base en gréage (Qualified Basic Rigging); Certification en levage

  Ponts (truss), Moteurs à chaîne, Treuil, Plates-formes élévatrices, Câbles

  1mo

  Event Rigger - Vancouver- Part Time

  Vancouver, BC

  Part Time

  

  Encore Global: A leading global event production company with unmatched technical expertise and a hospitality-first approach.

  2+ YOECandidates need a high school diploma or equivalent, 500+ hours of onsite rigging experience, Basic Rigging and lift certifications, and lift and ground rigging experience. Supervising a rigging team is preferred.

  Motors, Truss, Personnel lifts, Cable picks

  1mo

  Rigging Manager

  Vancouver, BC

  Full Time

  

  Encore Global: A leading global event production company with unmatched technical expertise and a hospitality-first approach.

  4+ YOE2+ MgmtCandidates need at least 4 years of rigging experience in entertainment, theatre or production, and 2 years managing rigging teams. A basic rigging certification, lift certification and lift operation experience are required, and CAD software knowledge is needed.

  AutoCAD, VectorWorks, Auto Sketch, LD Assistant, Microsoft Excel, Microsoft Word

• 1mo

  HDD Roughneck - The Crossing Company Light Rig Division

  Taber, AB +2

  Full Time

  

  The Crossing Group

  Candidates need a valid Class 5 driver's licence (Class 1 preferred), safety tickets including SFA First Aid, H2S Alive, GDII, PCST and CSTS 2020, and the ability to pass drug and alcohol testing. HDD or drilling rig experience is an asset, along with strong physical stamina and a commitment to safety.

  drill pipe, drilling rig, tooling

  1mo

  Shop Labourer

  Alberta

  $36.31/hrFull Time

  

  The Crossing Group

  2+ YOECandidates need at least 2 years of labour experience in a shop, construction or industrial setting, a valid Class 5 licence with a clean driver's abstract, the ability to lift up to 50 lbs, and basic hand and power tool skills.

  Hand tools, Power tools, Crew trucks, Rigging equipment

• 1mo

  Maintenance Planner

  Winnipeg, MB

  Full Time

  

  Amsted Rail Company

  5+ YOECandidates need at least 5 years of experience in maintenance planning, supervision, project management, reliability or industrial maintenance. They need strong knowledge of mechanical, hydraulic and pneumatic systems, the ability to read technical drawings, and experience with CMMS software such as SAP.

  SAP, Maintenance Connection, Microsoft Excel, Microsoft Outlook, Microsoft Project

• 1mo

  Maintenance Planner

  Winnipeg, MB

  Full Time

  

  Amsted Canada

  5+ YOECandidates need a technical diploma or trade certification, at least five years in maintenance planning or project management, and experience reading mechanical and hydraulic drawings. Experience with CMMS systems such as SAP and Maintenance Connection is required, with PMP or CMRP certification preferred.

  SAP, Maintenance Connection, Microsoft Excel, Microsoft Outlook, Microsoft Project, CMMS

• 1mo

  Wire Rope Fabricator

  Dartmouth, NS

  Full Time

  OE

  OCEANSIDE EQUIPMENT LTD: Oceanside also manufactures mooring connectors for both inshore and deep water Oilfield applications.

  Candidates need manufacturing experience working with tools and familiarity with rigging terminology and procedures. Knowledge of lifting gear inspection, wire rope examination and ASME rigging fundamentals is required, and the candidate must be at least 18 and authorized to work in Canada.

  Swaging machine, Test-bench machine, Reel coiler machine, Annealing machine, Forklift

  1mo

  Wire Rope Fabricator

  Mount Pearl, NL

  Full Time

  OE

  OCEANSIDE EQUIPMENT LTD: Oceanside also manufactures mooring connectors for both inshore and deep water Oilfield applications.

  Candidates need manufacturing experience working with tools and familiarity with rigging terminology and procedures. Knowledge of lifting gear inspection, wire rope examination and ASME rigging fundamentals is required, and the candidate must be at least 18 and authorized to work in Canada.

  Swaging machine, Test-bench machine, Reel coiler machine, Annealing machine, Forklift

• 1mo

  *HIRING BONUS* Licensed Aircraft Maintenance Engineer- Mechanics

  Manitoba

  $38.03–$45.65/hr

  

  KF Aerospace

  Candidates need a valid Transport Canada AME-M1 licence, willingness to get a type endorsement, Grade 12 or higher, and the ability to get an Enhanced Reliability Clearance. They also need to travel by air at short notice, work evening shifts, and communicate well in writing and speech.

  ground equipment, test tools, run-up equipment

• 1mo

  Scaffolder

  Tumbler Ridge, BC

  $55.26/hrFull Time

  

  Job Board - Conuma/Quintette

  3+ YOECandidates need scaffolder training or an apprenticeship, Working at Heights and fall protection training, and ideally 3 to 5 years of scaffolding experience. Physical fitness for 12-hour day and night shifts and lifting up to 50 pounds is required.

  scaffolding, work platforms, guardrails, stairs

• 1mo

  Manufacturing Maintenance Millwright

  Calgary, AB

  Full Time

  

  DIRTT Environmental Solutions

  2+ YOECandidates need a valid Journeyman Millwright certificate or Interprovincial Red Seal, two years of CNC and metal equipment troubleshooting experience, and a Class 5 driver's licence. Strong knowledge of pneumatics, hydraulics, bearings, gearboxes and conveyors is required, and five or more years in manufacturing maintenance is preferred.

  CMMS, CNC machinery, PLC

• 1mo

  Earth Resources Technician

  Palmerston, ON

  Full Time

  

  Well Initiatives Limited

  1+ YOECandidates need at least one year of water well or environmental consulting experience and familiarity with Ontario's Water Well Act Regulation 903. A valid class G Ontario licence with a clean driver's abstract is required, and mechanical aptitude and Excel or GIS skills are assets.

  Excel, AutoCAD, GIS, drill rigs, geophysical logging tools, heavy equipment

• 1mo

  Pre-Delivery Inspection Technicians

  Regina, SK

  Full Time

  

  Brandt in Canada

  Candidates need foundational mechanical and technical aptitude, a strong commitment to safety, and good customer service skills. A valid driver's licence and the ability to work shifts are required, and John Deere or heavy equipment experience and a journeyperson certification are assets.

  testing instruments, rigging equipment, welding equipment, pressure washers, hand and power tools

  1mo

  Pre-Delivery Inspection Technicians

  Regina, SK

  Full Time

  

  Brandt in Canada

  Candidates need foundational mechanical and technical aptitude, a strong commitment to safety, and good customer service skills. A valid driver's licence and the ability to work shifts are required, and John Deere or heavy equipment experience and a journeyperson certification are assets.

  testing instruments, rigging equipment, welding equipment, pressure washers, hand and power tools

• 1mo

  CNC Operator

  Terrebonne, QC

  $26.43–$37.21/hrFull Time

  A

  ADF

  2+ YOEADF needs a welding/assembly or machining diploma (D.E.P.), at least 2,000 hours of field experience, and the ability to read technical drawings. French is required, and English is an asset.

  Overhead crane, Hoist, Grinding wheel, Cutting torch, BDL system, Saw

  1mo

  EHS Training Specialist – Environment, Health & Safety

  Terrebonne, QC

  Full Time

  A

  ADF

  5+ YOECandidates need at least five years of EHS training experience in an industrial or construction setting, plus experience building training programs and coaching workers. Fluent bilingual French and English, spoken and written, is required.

  Health and safety, Regulatory compliance, Lockout/tagout, Presentation skills, Evaluate training, Coaching

• 1mo

  Electro-Mechanic

  Kirkland Lake, ON

  Full Time

  

  Wajax: operates an integrated distribution system providing sales, parts and services to a broad range of customers in diverse sectors of the Canadian…

  1+ YOEWajax needs candidates with some mechanical or shop experience (1 to 3 years preferred), a Grade 12 diploma or equivalent, and mechanical aptitude. Candidates should be able to use hand tools, work safely, handle rigging and lifting devices, and be flexible about overtime.

  hand tools, rigging equipment, lifting devices, test equipment

• 1mo

  Construction Installer

  Fergus, ON +1

  

  Stubbe s Workforce Inc: Stubbe’s Precast is a family owned company that started in 1982 by supplying precast to the agricultural market.

  Candidates need to be dependable team players comfortable working outdoors year-round and at heights, able to lift up to 50 lbs, and able to read English, read drawings and use a tape measure in metric and imperial. Welding education or experience is an asset.

  tape measure

• 1mo

  Apprentice - Field Mechanic

  Leduc, AB

  S

  Savanna

  Candidates need a high school diploma, registration as a 1st to 4th year Heavy Equipment Technician apprentice (or currently in related training), strong mechanical aptitude and a valid Class 5 driver's licence. Hydraulic troubleshooting, electrical basics and experience with drilling or heavy equipment are assets.

  Service truck

  1mo

  Yard Coordinator

  Leduc, AB

  S

  Savanna

  Savanna needs candidates with a high school diploma, a valid Class 5 licence with a clean driver's abstract, and a valid forklift certification. Current WHMIS, TDG and First Aid/CPR certifications are required, and experience in drilling, oilfield, construction or industrial work is a strong asset.

  Forklift, Skid steer, Power tools, Microsoft Office, Inventory management software

14 companies