“RAM Structural System” jobs in Canada – Page 3

No matching filters. Try another name.

Results

• 29d

  Regional Account Manager Ottawa, ON

  Ottawa, ON

  

  James Hardie

  3+ YOECandidates need a bachelor's degree or equivalent experience and 3+ years of progressive sales experience, ideally in building products. They also need 1+ years using a CRM system, the ability to travel up to 50%, and a valid driver's licence with a clean driving record.

  Salesforce, HubSpot, Zoho

  29d

  Regional Account Manager

  Montréal, QC

  

  James Hardie

  3+ YOECandidates need 3+ years of progressive sales experience, preferably in building products, and a bachelor's degree or equivalent experience. They also need 1+ year using a CRM system, a valid driver's licence, and the ability to travel up to 50% of the time.

  Salesforce, HubSpot, Zoho, CRM system

• 29d

  Railway Systems Integration Specialist

  Toronto, ON

  Full Time

  

  SYSTRA: With its 11,000 employees, the Group's mission is to connect people and bring territories closer together in the 80 countries where it operates.

  10+ YOECandidates need a university degree in engineering or equivalent, plus 10 to 15 years of railway systems integration or related engineering experience. Knowledge of EN 50126, ISO 15288, railway standards and regulations is needed, and a P.Eng or C.E.T. is an asset.

  FMECA, FRACAS

  29d

  Engineering Manager – Civil & Station Engineering

  Toronto, ON

  Full Time

  

  SYSTRA: With its 11,000 employees, the Group's mission is to connect people and bring territories closer together in the 80 countries where it operates.

  8+ YOECandidates need at least 8 years of engineering experience, including 5 years on multi-disciplinary rail transit projects, and a university degree in engineering. Strong communication, stakeholder management and knowledge of railway standards and engineering management practices are required.

  Primavera P6

  29d

  Sector Design Deputy Manager - ALTO project / Cadence

  Montréal, QC

  Full Time

  

  SYSTRA: With its 11,000 employees, the Group's mission is to connect people and bring territories closer together in the 80 countries where it operates.

  8+ YOE3+ MgmtCandidates need an engineering degree in civil, structural or transportation engineering, 8 to 12 years of transportation or railway design experience, and 3 to 5 years of design management. High-speed rail experience, P.Eng. eligibility and bilingual English and French are assets.

  BIM, Common data environments

  29d

  Sector Design Manager - ALTO project / Cadence

  Montréal, QC

  Full Time

  

  SYSTRA: With its 11,000 employees, the Group's mission is to connect people and bring territories closer together in the 80 countries where it operates.

  12+ YOE7+ MgmtCandidates need 12 to 15 or more years in major transportation or railway design, including 7 to 10 years managing design on complex programs, plus a Civil, Structural or Transportation Engineering degree. P.Eng. registration or eligibility is preferred, and high-speed rail experience is strongly preferred.

  BIM, common data environment

• 29d

  RAMS Specialist, Kiewit Infrastructure Engineer

  Oakville, ON

  $127k–$133k/yrFull Time

  

  Kiewit: With its roots dating back to 1884, the employee-owned organization operates through a network of subsidiaries in the United States, Canada, and…

  5+ YOECandidates need a bachelor's degree in engineering and at least 5 years in systems engineering, systems assurance or RAMS work, ideally on rail transit. A P.Eng. or PE is preferred, along with strong written and oral communication skills.

  Isograph, ReliaSoft, Item Toolkit, PTC Windchill, DOORS

• 29d

  Senior Structural Engineer

  Edmonton, AB

  Full Time

  

  Entuitive

  7+ YOECandidates need an engineering degree in civil or structural engineering, 7 or more years of AEC experience, and Alberta professional engineering status. They also need strong project management skills and working knowledge of structural analysis software.

  SAP2000, RAM, Microsoft Word, Microsoft Excel, BIM

• 29d

  Forklift Operator/General Labourer

  Concord, ON

  

  Ram Iron & Metal Inc.: is a privately owned Canadian Company that has been actively involved in the recycling industry since 1983.

  Candidates need a valid counterbalance forklift certification and experience working outdoors. Knowledge of metals, skid-steer, rotator/clamp and cross-dock experience are assets.

  forklift, skid-steer, rotator/clamp, computer system

  29d

  Driver - AZ

  Toronto, ON

  

  Ram Iron & Metal Inc.: is a privately owned Canadian Company that has been actively involved in the recycling industry since 1983.

  3+ YOECandidates need a valid AZ licence, at least 3 years of commercial driving with trailer and 18-speed manual experience (roll-off or lugger an asset), and a clean abstract and CVOR. Good English and comfort with a phone, tablet and CB radio are also required.

  18-speed manual truck, roll-off truck, lugger, automated tarping system, CB radio, digital inspection form

  29d

  Welder

  Toronto, ON

  

  Ram Iron & Metal Inc.: is a privately owned Canadian Company that has been actively involved in the recycling industry since 1983.

  5+ YOECandidates need at least 5 years of fabricating and welding experience, strong MIG and stick skills, and the ability to read blueprints and sketches. Knowledge of hydraulics, DC electrical systems and physically demanding outdoor work is needed, and a valid work permit is required unless the candidate is a Canadian citizen or permanent resident.

  MIG welder, TIG welder, Stick welder, Plasma cutter, Cutting torch, Hand tools

  29d

  DZ Driver

  Toronto, ON

  

  Ram Iron & Metal Inc.: is a privately owned Canadian Company that has been actively involved in the recycling industry since 1983.

  3+ YOECandidates need a valid DZ licence, at least 3 years of commercial driving with trailer and manual 18-speed experience, and a clean abstract and CVOR. Knowledge of metals, roll-off or lugger experience, and comfort with a cell phone, tablet and CB radio are assets.

  18-speed manual truck, roll-off truck, lugger truck, automated tarping system, cell phone, tablet

  29d

  Metal Inspector

  Toronto, ON

  

  Ram Iron & Metal Inc.: is a privately owned Canadian Company that has been actively involved in the recycling industry since 1983.

  Candidates need a valid counterbalance forklift certification and prior experience working outdoors. Knowledge of metal materials, front-end loader experience, and comfort with tablets or hand-held devices are assets.

  forklift, front-end loader, tablet, hand-held device

  29d

  General Labourer

  Toronto, ON

  

  Ram Iron & Metal Inc.: is a privately owned Canadian Company that has been actively involved in the recycling industry since 1983.

  Candidates need handyman skills, experience troubleshooting problems, and the ability to do physically demanding work outdoors. Forklift or skid-steer experience is highly preferred, and training is available if none exists.

  forklift, skid steer, bobcat, power washer

  29d

  Truck Mechanic Apprentice

  Toronto, ON

  

  Ram Iron & Metal Inc.: is a privately owned Canadian Company that has been actively involved in the recycling industry since 1983.

  Candidates need to be working toward a 310T Truck and Coach licence through an approved apprenticeship in Ontario and hold a valid G driver's licence. Experience with Kenworth, MACK, Peterbilt, roll-off and tractor trucks is an asset, along with strong attention to detail and a safety-first mindset.

  welding equipment

  29d

  Safety & Environmental Advisor

  Toronto, ON

  

  Ram Iron & Metal Inc.: is a privately owned Canadian Company that has been actively involved in the recycling industry since 1983.

  5+ YOECandidates need 5 to 7 years of health, safety and environmental experience, a college or university diploma (preferably in health and safety), first aid certification and JHSC Level II. Two to three years of ISO 9001, 14001 or 45001 experience and strong writing skills are also needed.

  Microsoft Word, Microsoft PowerPoint, Microsoft Excel, Microsoft Outlook

  29d

  Heavy Equipment Mechanic

  Toronto, ON

  

  Ram Iron & Metal Inc.: is a privately owned Canadian Company that has been actively involved in the recycling industry since 1983.

  2+ YOECandidates need at least two years of heavy equipment mechanic experience, knowledge of mechanics, welding and machine maintenance, and preventative maintenance experience. Certifications such as Maintenance Mechanic 421A, forklift driving and lock-out training are preferred or assets.

  forklift, excavator, skid steer, loader, baler, lathe

• 29d

  Structural Engineer P. Eng (Building Systems)

  Woodstock, ON +2

  

  Stubbe s Workforce Inc: Stubbe’s Precast is a family owned company that started in 1982 by supplying precast to the agricultural market.

  4+ YOECandidates need a P.Eng licence in good standing with PEO, at least 4 years of building structural engineering experience, and reinforced concrete design skills. They also need structural analysis software and building code knowledge, plus strong written and spoken English.

  ETABS, STAAD Pro, SAP2000, SAFE, RISA 3D, S-Frame

• 29d

  Director of Engineering & Technical

  Wingham, ON

  $140k–$160k/yrFull Time

  

  Britespan Building Systems Inc: Britespan provides pre-engineered permanent, portable, and temporary structures across North America and Europe.

  7+ YOEBritespan needs a Registered Professional Engineer (P.Eng.) with 7+ years of engineering and technical management experience, including structural design and product launches. Candidates must know Canadian and/or U.S. building codes and must be willing to relocate to Wingham.

  SolidWorks, AutoCAD, PDM, STAAD, RAM Elements, Microsoft Office

  29d

  Director of Engineering & Technical

  Kitchener, ON

  $140k–$160k/yrFull Time

  

  Britespan Building Systems Inc: Britespan provides pre-engineered permanent, portable, and temporary structures across North America and Europe.

  7+ YOECandidates need a P.Eng. or eligibility to seal engineering documents, 7+ years of engineering and technical management experience, and structural design knowledge. Familiarity with building codes, CAD and SolidWorks, and team leadership is required.

  SolidWorks, AutoCAD, PDM, STAAD, RAM Elements, Microsoft Office

• 29d

  Senior ETCS Signalling Engineer

  Mississauga, ON

  $150k–$200k/yrHybridFull Time

  

  AECOM: AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2025.

  8+ YOECandidates need a Bachelor's degree and 8 years of railway signalling experience, with a focus on ETCS Level 2, plus Professional Engineer designation or the ability to obtain it. Knowledge of CENELEC safety standards, ATC, CBTC and interface work is preferred.

  ETCS, ATC systems, CBTC, interlocking systems

  29d

  Senior ETCS Signalling Engineer

  Markham, ON

  $150k–$200k/yrHybridFull Time

  

  AECOM: AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2025.

  8+ YOECandidates need a Bachelor's degree and 8 years of railway signalling experience with a focus on ETCS Level 2, plus Professional Engineer designation or the ability to obtain it. Preferred experience includes ATC, CBTC, ATO, ATP, PTC, ETCS testing and CENELEC standards knowledge.

  ETCS, ATC, CBTC, LRT S&TCS systems

  29d

  OCS Engineer

  Calgary, AB

  $130k–$180k/yrHybridFull Time

  

  AECOM: AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2025.

  6+ YOECandidates need a Bachelor's degree, 6 years of OCS design experience for public transit rail, and a Professional Engineer designation or eligibility within 12-18 months. A driver's licence is required, and strong communication and client-facing skills are preferred.

  Civil 3D

  29d

  OCS Engineer

  Mississauga, ON

  $130k–$180k/yrHybridFull Time

  

  AECOM: AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2025.

  6+ YOECandidates need a Bachelor degree, 6 years of OCS design experience on public transit rail projects, and a Professional Engineer designation or eligibility to obtain it within 12-18 months. A driver's licence is required, and strong communication skills for client-facing work are expected.

  Procurement, Quality assurance procedures, EMI, Team building, P.Eng., Multitask

8 companies