“Power drill” jobs in Canada – Page 30

No matching filters. Try another name.

Results

• 1mo

  Carpenter

  Edmonton, AB +1

  On-siteFull Time

  

  ATCO

  3+ YOECandidates need at least 3 years of building maintenance experience, a Class 5 licence and a clean driver's abstract. A Red Seal and Certificate in Carpentry is an asset, along with good mechanical, communication and teamwork skills.

  planers, joiners, drill presses, power saws, sanders, hand tools

  1mo

  Fitter/ Welder

  Grimsby, ON

  $27–$30/hrFull Time

  

  ATCO

  Candidates need structural welding, fitting and steel fabrication experience, and must read blueprints, shop drawings and welding symbols. FCAW certification is preferred, and the work requires lifting up to 55 lbs and working at heights.

  Torches, Drills, Grinders, Clamps, Squares, Overhead cranes

• 1mo

  Heavy Duty Technician or Truck and Transport - Red Seal Certified

  Pugwash, NS

  Full Time

  WS

  Windsor Salt

  Candidates need an Interprovincial Red Seal Heavy Duty Equipment Technician or Truck and Transport Mechanic certification and experience maintaining heavy mobile equipment, ideally in mining. They must be able to work underground, lift up to 50 lbs regularly, work rotating shifts and hold a valid driver's licence.

  hand tools, power tools, diagnostic equipment, lifting devices

• 1mo

  Project Technologist

  Saskatoon, SK +1

  Full Time

  

  Pinchin Canada

  Pinchin Canada needs a diploma or degree in environmental science or engineering, strong technical writing, and Microsoft Office skills. A valid driver's licence and vehicle, and the ability to travel and work outside business hours, are required.

  Microsoft Word, Microsoft Excel, Outlook, pumps, hand augers, hammer drill

• 1mo

  Plumber/Gas-fitter Journeyman - Onsite Shift work

  Edmonton, AB

  RemoteFull Time

  

  Dexterra

  5+ YOECandidates need a Journeyman Plumbing certificate, Gas Fitter Technician certification, a valid driver's licence and about 5 years of plumbing experience. They should be able to use hand and power tools safely and work both alone and in a team.

  PEX cutter, Crimping tool, Drill, Torch, Pipe bender, Manometer

  1mo

  Plumber/Gas-fitter Journeyman - Onsite Shift work

  Grande Prairie, AB

  RemoteFull Time

  

  Dexterra

  5+ YOECandidates need a Journeyman Plumbing certificate, Gas Fitter Technician certification, a valid driver's licence and about 5 years of plumbing experience. They should be able to use hand and power tools safely and work both alone and in a team.

  PEX cutter, Crimping tool, Drill, Torch, Pipe bender, Manometer

  1mo

  Carpenter - Dexterra

  Petawawa, ON

  $20–$21/hrOn-siteFull Time

  

  Dexterra

  3+ YOECandidates need a Grade 12 diploma, a valid Ontario carpentry certificate or equivalent, and at least 3 years of similar experience. They must work safely with carpentry machinery, work at heights, and hold a clean driver's abstract.

  metal brake, drill, circular saw, reciprocating saw, table saw, miter saw

• 1mo

  Geoscientist

  Burnaby, BC

  $55k–$70k/yrHybridFull Time

  

  AECOM: AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2025.

  Candidates need a B.Sc. or higher in earth sciences, geology, hydrogeology or a related engineering discipline, plus a valid unrestricted British Columbia driver's licence. Experience with GIS, environmental databases and field investigations is preferred.

  EQuIS, OpenGround, acQuire, GIS, Microsoft Excel, Microsoft Word

• 1mo

  Senior Wet Utilities Engineer

  Vancouver, BC

  On-siteFull Time

  

  Arcadis

  12+ YOECandidates need 12 to 15 years of civil or water engineering experience, mostly on site, with a bachelor's degree in a relevant engineering field. Registration as a Professional Engineer with EGBC is expected before mobilisation, along with knowledge of BC and AWWA standards and buried pipe construction.

  Documentation, Welding, Inspection, P.Eng., Plumbing, Communication skills

  1mo

  Project Manager / Senior Engineer - Municipal Linear Infrastructure

  Markham, ON +1

  HybridFull Time

  

  Arcadis

  10+ YOECandidates need a Civil Engineering degree and 10-15 years of municipal linear infrastructure experience in Ontario, including GTA project work. A P.Eng. is a strong asset, and trenchless construction experience is highly valued.

  AutoCAD, Civil 3D

  1mo

  Senior Environmental Field Technician

  Halifax, NS +1

  HybridFull Time

  

  Arcadis

  8+ YOECandidates need 8+ years of environmental fieldwork, a technical diploma or bachelor's degree in a related field, and ideally a C.Tech or C.E.T designation. Experience with FCSAP, PFAS and government contaminated sites is expected, along with strong mechanical aptitude.

  real-time instrumentation, drilling equipment, Microsoft Word, Microsoft Excel, Microsoft PowerPoint

  1mo

  Quality Manager, ESDC

  Vancouver, BC

  On-siteFull Time

  

  Arcadis

  15+ YOEArcadis needs candidates with 15+ years of quality or construction experience on major infrastructure projects and a civil engineering or construction-related bachelor's degree. Experience with marine works, deep excavation, piling and post-tensioned concrete is a strong asset.

  Quality assurance procedures, Quality assurance, Quality control, Manage quality, Process improvement, Inspection

  1mo

  Procurement Manager - Canada

  Toronto, ON

  HybridFull Time

  

  Arcadis

  10+ YOECandidates need at least 10 years of project procurement, sourcing or subcontracting experience in engineering, infrastructure or construction. Strong commercial, contract negotiation and supplier management skills are required, and Canadian project experience is strongly preferred.

  Procurement, Vendor management, Analyse supply chain strategies, Regulatory compliance, Reporting, Onboarding

• 1mo

  Senior Blasting and Vibration Consultant

  Greater Sudbury, ON +2

  Full Time

  W

  WSP

  Candidates need a bachelor's degree in geological, mining or civil engineering with a blasting focus, an active PEO membership, and proven blasting experience in mining or construction. A blaster's certificate, strong report writing and fluent English are required, with French an asset.

  ESRI What if?, Leadership, Regulatory compliance, Documentation, Presentation skills, Sales

  1mo

  Intermediate Geotechnical Technician

  Fort McMurray, AB

  Full Time

  W

  WSP

  3+ YOECandidates need a geological, construction or civil engineering technology diploma, at least 3 years of geotechnical or field services experience, and hands-on drilling and instrumentation skills. An unrestricted Alberta Class 5 driver's licence and strong English communication are required.

  Inclinometer, ShapeAccelArray, Vibrating wire instruments

  1mo

  Senior Instrumentation and Monitoring Engineer

  Markham, ON

  Full Time

  W

  WSP

  Candidates need a university degree in civil engineering, ideally geotechnical, with proven experience installing monitoring instruments and supervising active construction sites. They also need a valid G driver's licence, the ability to lift 50 pounds, and availability for local travel and extended hours.

  Total station, Inclinometers, Strain gauges, Piezometers, Monitoring readout units

  1mo

  Intermediate Instrumentation and Monitoring Engineering

  Markham, ON

  Full Time

  W

  WSP

  Candidates need a university degree in civil engineering, ideally with a geotechnical focus, and hands-on experience installing monitoring instruments and using total stations. Experience on active construction sites, a valid G licence, and the ability to lift 50 pounds are also needed.

  Total station, Inclinometers, Strain gauges, Vibrating wire piezometers, Tiltmeters, Crack gauges

  1mo

  Intermediate Geotechnical Engineer

  Dartmouth, NS

  Full Time

  W

  WSP

  5+ YOECandidates need a civil or geotechnical engineering background, P.Eng. registration or eligibility with Engineers Nova Scotia, and at least five years as a geotechnical or geological engineer. A valid Canadian driver's licence, consulting experience, and willingness to work on project sites are required.

  GeoStudio, Rocscience

  1mo

  Experienced Technician, Environmental

  London, ON +2

  Full Time

  W

  WSP

  3+ YOE3+ MgmtCandidates need at least three years supervising drilling and remediation contractors, a diploma in environmental sciences, a valid driver's licence, and strong health and safety knowledge. They must also be willing to travel and work with little supervision.

  ESRI What if?, Health and safety, Hazard assessment, Work efficiently, Program management, Conduct field work

  1mo

  Environmental Project Manager

  Saskatoon, SK +1

  Full Time

  W

  WSP

  8+ YOECandidates need a bachelor's degree in science or engineering and at least 8 years of contaminated site assessment experience. They need strong financial and budget management skills, soil and groundwater sampling experience, and knowledge of Saskatchewan environmental regulations. A professional designation and oil and gas experience are assets.

  ESRI What if?, Environmental assessment, Program management, Prepare technical reports, Time management, Communication skills

  1mo

  Environmental Project Manager

  Calgary, AB +1

  Full Time

  W

  WSP

  8+ YOECandidates need a bachelor's degree in science or engineering and at least 8 years of contaminated site assessment experience. Strong budgeting, analytical, communication and safety skills are needed, plus knowledge of Alberta and Saskatchewan environmental regulations; oil and gas experience and a professional designation are assets.

  ESRI What if?, Health and safety, Hazard assessment, Work efficiently, Environmental assessment, Program management

  1mo

  Senior Environmental Project Manager

  Edmonton, AB +1

  Full Time

  W

  WSP

  10+ YOECandidates need a university degree or diploma in engineering or natural or earth sciences, and at least 10 years of contaminated site assessment experience on upstream oil and gas sites. Northern experience, a safety-focused attitude and eligibility to register in NWT and Yukon are preferred.

  ESRI What if?, Coaching, Health and safety, Emergency response, Reporting, Surveying

• 1mo

  Skilled Trade - Tool and Die Maker - Oakville, ON

  Oakville, ON

  $53/hrOn-siteFull Time

  

  Ford BlueOvalCity\/TEVC

  8+ YOECandidates need a completed tool and die apprenticeship with a Certificate of Qualification 430A, or eight years of trade experience after earning it. They must be able to work days, afternoons and midnights on a rotating schedule.

  CNC milling machines, Lathes, Milling machines, Surface grinders, Radial drills, Stick and TIG welding equipment

• 1mo

  Geological / Geotechnical Drilling Rig Monitor

  Calgary, AB

  On-siteFull Time

  

  Stantec

  3+ YOECandidates need three years of sonic, mud rotary or dual rotary rig experience, three years of geotechnical testing, and three years of Oil Sands or northern Alberta glacial geology experience. A Class 5 licence, Standard First Aid, CSTS and H2S Alive are required, plus a degree or technology diploma in geology or geotechnical engineering, or equivalent experience.

  Sonic drill rig, Mud rotary drill rig, Dual rotary drill rig, Microsoft Office, Slope inclinometer, Vibrating wire piezometer

9 companies