“pneumatic tools” jobs in Canada – Page 41

No matching filters. Try another name.

Results

• 1mo

  Heavy Duty Mechanic

  Squamish, BC

  $47.80/hr

  

  Amrize

  3+ YOECandidates need a B.C. Certificate of Qualification or Heavy Duty Mechanic ticket, 3-5 years of related experience, and a Class 1 or Class 3 with air licence. Welding, fabrication, knowledge of hours-of-service rules and fluent English are also required.

  Forklift, Microsoft Excel, Microsoft Word, Microsoft Outlook

  1mo

  Maintenance Millwright (Afternoon Shift)

  Coldwater, ON

  

  Amrize

  Candidates need an Industrial Mechanic Millwright certification from the college of trades or an interprovincial Red Seal. They must follow safety protocols and wear respirators, which requires being clean shaven where the seal meets the face.

  Cranes, Jacks, Tractors, Drills, Grinders, Welding equipment

• 1mo

  Air Systems/Pneumatics Engineer

  Montréal, QC

  RemoteFull Time

  

  SOGECLAIR

  5+ YOECandidates need a bachelor's or master's degree in mechanical or aerospace engineering, ideally 5 to 8 years of aerospace experience, and knowledge of fluid flow, thermodynamics and pneumatics. Bilingual French and English and willingness to travel short-term are required.

  MS Office, Model Based Engineering, Simulation software

  1mo

  Air Systems/Pneumatics Engineer

  Toronto, ON

  RemoteFull Time

  

  SOGECLAIR

  5+ YOECandidates need a bachelor's or master's degree in mechanical or aerospace engineering, ideally 5 to 8 years of aerospace experience, and knowledge of fluid flow, thermodynamics and pneumatics. Bilingual French and English and willingness to travel short-term are required.

  MS Office, Model Based Engineering, Simulation software

• 1mo

  Millwright

  Mississauga, ON

  $47.94/hrTemporary

  

  PepsiCo

  Candidates need an Industrial Millwright Red Seal ticket, a passed technical assessment, and hands-on experience with mechanical systems, electronics, machine shop tools and machine troubleshooting. PLC experience is a plus.

  PLC, VFD, lathe, grinder, welding equipment, hydraulic systems

  1mo

  PepsiCo Beverages Maintenance Millwright (Winnipeg)

  Winnipeg, MB

  $38.37–$46.26/hrTemporary

  

  PepsiCo

  Candidates need a Red Seal Industrial Mechanic (Millwright) certification and a valid Industrial Millwright Journeyperson ticket. A 4th Class Power Engineer certificate is preferred, along with strong troubleshooting skills and the ability to work shifts and overtime.

  PLC, Lathe, Grinder, Welding equipment

• 1mo

  Maintenance Mechanic

  Toronto, ON

  $30–$35/hrFull Time

  AH

  Apollo Health And Beauty Care: Apollo Health and Beauty Care is the largest Private Label and Control Label Personal Care Manufacturer in Canada with formidable penetration and…

  3+ YOECandidates need at least 3 years of manufacturing maintenance experience, a welding licence, and a millwright, machinist or welding fabrication licence. Post-secondary education, electrical, pneumatic and hydraulic knowledge, and fluent English are also required.

  CMMS, Conveyors, Labelers, Fillers, Cappers, Torquers

• 1mo

  Quality Inspector (Segment 1; Aerospace)

  Stratford, ON

  $34.50/hr

  S

  Schaeffler: With innovative technologies, products, and services for electric mobility, CO₂-efficient drives, chassis solutions and renewable energies, the…

  Candidates need a Grade 12 diploma, demonstrated inspector-level competency or mechanical aptitude, and knowledge of quality systems and policies. They must pass a Canadian Controlled Goods Assessment, a criminal background check, and comply with ITAR.

  Mechanical gauges, Pneumatic gauges, Optical gauges, Electrical gauges

• 1mo

  Structural Assembler II

  Mississauga, ON

  MH

  Mitsubishi Heavy Industries, Ltd.

  2+ YOECandidates need 2-4 years of aircraft assembly experience, the ability to read 2D and 3D technical drawings, and skill with pneumatic and power hand tools. Past aerospace or manufacturing experience is an asset, along with work authorization in Canada and willingness to work rotating shifts.

  Pneumatic tools, Power hand tools, Jigs, Fixtures

• 1mo

  Service Technician - PythonX Robotic Plasma Cutting Systems

  Hamilton, ON

  LE

  Lincoln Electric: For more information about Lincoln Electric and its products and services, visit the Company's website at http://www.lincolnelectric.com.

  3+ YOECandidates need 3+ years of service technician experience, or post-secondary training plus 5+ years of related experience. Strong mechanical, electrical and pneumatic skills, the ability to read drawings, and a valid driver's licence are required.

  hand and power tools, PythonX

• 1mo

  Mechanical Technician

  Etobicoke, ON

  $72k–$101k/yr

  

  Apotex: To report an Adverse Reaction/Experience to Apotex, or an Apotex affiliated company, please contact: [email protected].

  10+ YOEApotex needs candidates with 10 years of mechanical experience in pharmaceutical or consumer goods, a trade licence or technical certification, and in-depth knowledge of mechanics, electrical, hydraulics and pneumatics. Strong communication, leadership and the ability to work any shift are also required.

  PLC, machine shop equipment, production machinery

• 1mo

  Full Time Production Associate

  St. Thomas, ON

  $23.35/hrOn-siteFull Time

  

  Cornerstone Building Brands: Cornerstone Building Brands is a leading manufacturer of exterior building products serving the residential and low-rise non-residential markets…

  Candidates need general labour, construction or manufacturing experience (preferred), a strong work ethic, reliability and a safety-focused attitude. They must be 18 or older, eligible to work in Canada, able to stand for 9 hours, lift 30 to 50 lbs, and work rotating shifts, overtime and some Saturdays.

  power tools, hand tools, saws, pneumatic tools, welding machinery, tape measure

• 1mo

  Software Developer

  Woodbridge, ON

  

  ATS Automation: ATS’ reputation, knowledge, global presence and standard automation technology platforms differentiate the Company and provide competitive…

  3+ YOECandidates need a bachelor's degree in computer science, software or electrical/computer engineering, plus 3 years of production software experience. They should know C#, .NET, SCADA and MES systems, and GitHub and Jira.

  C#, .NET, LabVIEW, C++, GitHub, Jira

• 1mo

  Industrial Mechanic Millwright

  Calgary, AB

  Full Time

  

  Rona Inc.

  Candidates need proven safety compliance and industrial mechanic or millwright experience, or an electrician certificate with mechanical maintenance experience. Strong troubleshooting, blueprint reading and mechanical drive skills are required.

  Electric pallet truck, Electric lift truck, Front end loader, Welding equipment

• 1mo

  Maintenance Technician (Fifth Class Power Engineer)

  Vancouver, BC

  Full Time

  

  Alsco: Alsco Uniforms provides managed uniform and linen laundry services for healthcare, industrial & hospitality businesses.

  2+ YOECandidates need at least two years of maintenance engineering experience with machinery, electricity, hydraulics, pneumatics, welding and boilers. A valid driver's licence with a clean driving record is required, and a Fifth Class Power Engineer certificate, boiler licence or PLC programming may be needed at some locations.

  PLC, forklift, power tools, hand tools, boiler, welding equipment

• 1mo

  Test Facilities Specialist

  Welland, ON

  

  INNIO: INNIO Group is a global distributed energy solutions provider that delivers reliable, flexible, transient, decentralized, modular and efficient power.

  3+ YOECandidates need a three-year Engineering Technology diploma in Electronics or Automation and 3+ years in a manufacturing environment with PLC, CNC, robotics, hydraulics and pneumatics experience. Programming and troubleshooting PLCs is required, and a Red Seal electrician certificate is preferred.

  PLC, CNC machines, SCADA, HMI, Rockwell controllers, Siemens controllers

  1mo

  Test Facilities Specialist

  Welland, ON

  

  INNIO: INNIO Group is a global distributed energy solutions provider that delivers reliable, flexible, transient, decentralized, modular and efficient power.

  3+ YOECandidates need a three-year Engineering Technology diploma in Electronics or Automation and 3+ years in a manufacturing environment with PLC, CNC, robotics, hydraulics and pneumatics experience. Programming and troubleshooting PLCs is required, and a Red Seal electrician certificate is preferred.

  PLC, CNC machines, SCADA, HMI, Rockwell controllers, Siemens controllers

• 1mo

  Instrumentation Mechanic (Certified Journeyman)

  British Columbia

  $57.90/hrFull Time

  

  Gibraltar Mine: Headquartered in Vancouver, Canada, Taseko Mines Limited is a dynamic international mining company driven to unlock the true value of copper in…

  2+ YOECandidates need a Red Seal trade qualification, a high school diploma or equivalent, and demonstrated technical performance. Mill operating experience in crushing, grinding and flotation, plus familiarity with Modicon PLC and Emerson DeltaV DCS, are strong assets.

  Modicon PLC, hand tools, power tools, test equipment

• 1mo

  Mechanical Engineer

  Vernon, BC

  $80k–$93k/yrFull Time

  

  Kal Tire: The company has warehouse facilities across Canada servicing over 280 Kal Tire retail and commercial stores.

  3+ YOEKal Tire needs candidates with at least 3 years of similar experience, a bachelor's degree in mechanical engineering or equivalent, and a valid class 5 driver's licence. Strong SolidWorks, Excel and problem-solving skills are also required.

  SolidWorks, Microsoft Office, Excel, Access

• 1mo

  Mechanical Technologist - Integration

  Mississauga, ON

  Full Time

  CE

  Candu Energy Inc.

  8+ YOECandidates need a mechanical engineering technology diploma or a certificate of qualification, plus 8 to 10 years of mechanical assembly, testing and repair experience on nuclear inspection tooling. They also need pneumatics and hydraulics knowledge, the ability to obtain a security clearance, and willingness to travel to project sites.

  SolidWorks

• 1mo

  Professional Engineering - Air Systems/Pneumatics - Pool Posting

  Dorval, QC

  

  Bombardier: Headquartered in Greater Montréal, Québec, Bombardier operates aerostructure, assembly and completion facilities in Canada, the United States and…

  5+ YOECandidates need a bachelor's or master's in mechanical or aerospace engineering and ideally 5-8 years of aerospace experience. They need fluid flow and thermodynamics knowledge, pneumatics basics, bilingual French and English, and willingness to travel.

  MS Office, Model Based Engineering tools, Simulation software

  1mo

  Technician, Mechanical Maintenance

  Quebec

  

  Bombardier: Headquartered in Greater Montréal, Québec, Bombardier operates aerostructure, assembly and completion facilities in Canada, the United States and…

  3+ YOECandidates need a DEC in Industrial Maintenance Technology or Mechanical Engineering, or a professional diploma in electromechanics with 3 years of relevant experience. Maintenance experience on production machines, hydraulic, mechanical or pneumatic systems is an asset, along with independence, good communication and teamwork.

  CNC machine, Lathe, Milling machine, Sheet metal equipment, Micrometer, Vernier caliper

  1mo

  Professional Senior, Engineering, Liaison Aircraft System, Operations Support, Global Platforms

  Dorval, QC

  

  Bombardier: Headquartered in Greater Montréal, Québec, Bombardier operates aerostructure, assembly and completion facilities in Canada, the United States and…

  5+ YOECandidates need a Bachelor's or Master's in Aerospace or Mechanical Engineering (Systems Engineering training is an asset) and about 5 years of functional testing experience on propulsion, pneumatic, flight control and hydraulic systems. Strong communication, integration and multidisciplinary teamwork skills are required.

  Microsoft Office

  1mo

  Professional Senior, Engineering - Liaison Aircraft System, Operations Support

  Dorval, QC

  

  Bombardier: Headquartered in Greater Montréal, Québec, Bombardier operates aerostructure, assembly and completion facilities in Canada, the United States and…

  5+ YOECandidates need a Bachelor's or Master's in aerospace, mechanical or a related field, plus about 5 years of functional testing experience on aircraft systems. Strong integration, data analysis and communication skills are required.

  Microsoft Office

17 companies