“Robot controller” jobs in Canada – Page 8

No matching filters. Try another name.

Results

• 5d

  Warehouse Associate

  Vaughan, ON

  $20.60/hrOn-siteFull Time

  

  Cardinal Health Canada, Inc.: (New York Stock Exchange: CAH), a $103 billion health care services company that improves the cost-effectiveness of healthcare around the globe.

  Candidates need comfort with lifting 10 to 30 pounds, with occasional lifts up to 50 pounds. A high school diploma, machine operation experience and RF scanner experience are preferred, along with attention to detail and good teamwork and communication skills.

  RF scanner, Warehouse mobile equipment, Autonomous Mobile Robots (AMR)

  5d

  Warehouse Associate

  Vaughan, ON

  $20.60/hrOn-siteFull Time

  

  Cardinal Health Canada, Inc.: (New York Stock Exchange: CAH), a $103 billion health care services company that improves the cost-effectiveness of healthcare around the globe.

  Candidates need comfort with lifting 10 to 30 pounds, with occasional lifts up to 50 pounds. A high school diploma, machine operation experience and RF scanner experience are preferred, along with attention to detail and good teamwork and communication skills.

  RF scanner, Warehouse mobile equipment, Autonomous Mobile Robots (AMR)

  5d

  Warehouse Associate

  Vaughan, ON

  $20.60/hrOn-siteFull Time

  

  Cardinal Health Canada, Inc.: (New York Stock Exchange: CAH), a $103 billion health care services company that improves the cost-effectiveness of healthcare around the globe.

  Candidates need comfort lifting 10 to 30 lbs and occasionally up to 50 lbs, plus attention to detail and strong teamwork and communication. A high school diploma, machine operation and RF scanner experience are preferred, and training is provided.

  RF scanner, warehouse mobile equipment, Autonomous Mobile Robots (AMR)

• 5d

  Crate Wash Lead

  Brantford, ON

  

  Hilton Food Group Plc

  2+ YOECandidates need 2-3+ years of warehouse, manufacturing or production experience, with demonstrated team leadership. A valid forklift certification, knowledge of food safety and sanitation, and ERP/WMS familiarity are required.

  forklift, conveyor, AGV, ERP, WMS, crate wash equipment

• 5d

  Senior Financial Planning Analyst

  Brampton, ON

  $92k–$128k/yrFull Time

  

  MDA

  8+ YOECandidates need a post-secondary degree and a professional accounting designation (CA, CGA, CMA or CPA), plus at least eight years of accounting experience. Strong Excel, IFRS 15, SOX and SRED knowledge is required, along with the ability to present to senior management.

  Excel

  5d

  Intermediate Software Developer

  Kanata, ON

  Full Time

  

  MDA

  3+ YOECandidates need a science or equivalent degree in computer science, math, engineering or physics, plus 2.5 to 5 years of post-graduation experience. Mandatory: 2+ years of current C++ development and software development under Linux and Windows.

  C++, Linux, Windows, OpenCV, OpenGL, Embree

• 5d

  Senior Commissioning Agent (Mechanical)

  Ontario

  Full Time

  

  Salas O'Brien: Salas O’Brien is an employee-owned engineering and technical services firm focused on advancing the human experience through the built environment.

  5+ YOECandidates need 5+ years of MEP commissioning or construction experience and a mechanical engineering, mechatronics or technologist credential. They also need knowledge of HVAC, containment and pressurization systems, reliability clearance and a valid Ontario driver's licence.

  MS Word, MS Excel, MS Project, Building Automation Systems, Cloud-based commissioning software

• 5d

  Financial Controller (CPA)

  Oakville, ON

  Full Time

  

  Gastronomous Technologies Inc.

  5+ YOE2+ MgmtCandidates need a bachelor's degree in accounting, finance or commerce and a CPA designation in good standing. They also need at least 5 years of accounting experience, including 2 in a Controller or senior accounting role, with ASPE or IFRS knowledge and advanced Excel skills.

  Microsoft Excel, QuickBooks Online, NetSuite

• 5d

  Part-Time Professor - Engineering - FAST

  Etobicoke, ON

  

  Humber College

  Candidates need a master's degree (Ph.D. preferred) in Mechanical, Mechatronics, or Industrial Engineering, or a related field, with hands-on industry experience in robotics or production planning. Polytechnic teaching or industry training experience and a PEng licence are preferred.

  KUKA robots

• 5d

  Machinist I

  Cambridge, ON

  $25–$30/hr

  

  Acuren Inspection, Inc.: Acuren (NYSE: TIC) is a leading provider of critical asset integrity services.

  Acuren Inspection asks for machining experience on manual or CNC machines, or a willingness to learn, plus the ability to read drawings and use precision measuring tools. Machinist certification or apprenticeship is an asset, and candidates should be able to lift up to 50 lbs and work overtime as needed.

  lathe, milling machine, saw, drill, grinder, CNC equipment

  5d

  Machinist I

  Cambridge, ON

  $25–$30/hrFull Time

  

  Acuren Inspection, Inc.: Acuren (NYSE: TIC) is a leading provider of critical asset integrity services.

  Candidates need hands-on machining experience with CNC or manual machines, or related technical skills and a willingness to learn. Machinist certification or apprenticeship is an asset, along with the ability to read drawings and work to test-standard requirements.

  CNC machines, Lathe, Milling machine, Saw, Drill, Grinder

• 5d

  AI Trainer: Mechanical Engineers CAD

  Toronto, ON

  RemoteFull Time

  

  Brunel

  2+ YOEBrunel needs fluent English, 2+ years of professional mechanical engineering experience, and a background in mechanical engineering or a closely related field. Candidates should know mechanics of materials, thermodynamics, heat transfer, fluid mechanics and CAD or FEA/CFD tools.

  SolidWorks, Fusion 360, Onshape, Creo, NX, CATIA

• 5d

  Journeyman Carpenter

  Edmonton, AB

  On-siteFull Time

  

  Promise Robotics

  2+ YOECandidates need a Journeyman Carpenter certification, at least two years of residential framing experience, and a high school diploma or equivalent. They must know building codes, read blueprints, use hand and power tools, and lift up to 50 pounds.

  Saws, Drills, Nail guns, Framer's squares, Measuring tapes, AutoCAD

• 5d

  Controls Integration Specialist Supervisor

  LaSalle, ON

  $47–$56/hrFull Time

  

  CenterLine (Windsor) Limited

  10+ YOECandidates need a diploma or degree in electrical engineering technology, automation, mechatronics or industrial controls, and at least 10 years of industrial automation or controls integration experience. Strong PLC, HMI, networking, motion control, robotics and machine safety knowledge is required, and supervisory experience is preferred.

  PLC, HMI, robotics, motion control systems, industrial networking, huddle board

• 5d

  Technicien en Automatisation et Contrôle | Automation and Control Technician

  Montréal, QC

  On-siteFull Time

  

  Keurig Dr Pepper: Keurig Dr Pepper (Nasdaq: KDP) is a leading beverage company with more than 150 owned, licensed and partner brands that meet a wide range of needs…

  2+ YOE2 à 3 ans d'expérience en milieu industriel; DEC ou AEC en instrumentation et automatisation; Expérience avec les automates Allen-Bradley (Control Logix)

  Allen-Bradley PLC, Fanuc robots, Cognex, GE iFIX, FactoryTalk View, SQL

• 5d

  QNX Senior Software Developer in Test

  Ottawa, ON

  Full Time

  BL

  BlackBerry Limited

  Candidates need experience automating tests for software or embedded systems, strong Python, C and Shell scripting skills, and knowledge of TCP/IP networking. A bachelor's degree in a related field, Linux experience, and familiarity with Git, Jira, Jenkins and CI/CD are required.

  Git, SVN, Jira, Jenkins

  5d

  QNX Senior Software Developer in Test

  Ottawa, ON

  Full Time

  BL

  BlackBerry Limited

  Candidates need experience automating tests for software or embedded systems, strong Python, C and Shell scripting skills, and knowledge of TCP/IP networking. A bachelor's degree in a related field, Linux experience, and familiarity with Git, Jira, Jenkins and CI/CD are required.

  Git, SVN, Jira, Jenkins

• 6d

  Chargé de cours : AEC en Robotique industrielle, groupe 12 – Conception et simulation d’une cellule robotisée

  Lévis, QC

  Part Time

  

  Cégep de Lévis

  Baccalauréat en génie électrique ou discipline équivalente; Expérience de travail pertinente dans le domaine; Combinaison de formation et d'expérience possible

  Logiciel de simulation robotique

  6d

  Chargé de cours : AEC en Robotique industrielle, groupe 12 – Systèmes robotisés

  Lévis, QC

  Part Time

  

  Cégep de Lévis

  Baccalauréat en génie électrique ou discipline équivalente; Expérience de travail pertinente dans le domaine; Combinaison de formation et d'expérience acceptée

  automate programmable, robot industriel

• 6d

  Technical Lead, Aerospace Development

  Ottawa, ON

  $140k–$160k/yrHybridFull Time

  

  ADGA Group Consultants Inc: ADGA Group is a Canadian-owned defence and security company delivering advanced technology solutions to government and industry.

  6+ YOECandidates need an engineering bachelor's degree and six years of recent aerospace design, evaluation and airworthiness documentation experience. A Secret clearance (or eligibility) and a Controlled Goods Certificate at hire are required, with CAF aerospace experience preferred.

  Unmanned air systems, Documentation, Inspection, Regulatory compliance, Engineering principles, Environmental legislation

• 6d

  Maintenance - Electrician

  Woodstock, ON

  

  North American Stamping Group: North American Stamping Group is a privately held company founded in 1978.

  Candidates need a valid 442A Industrial Electrician or 309A Construction & Maintenance electrician licence and experience in an industrial or manufacturing setting, ideally with press or stamping equipment. They must read blueprints and schematics, solve problems under pressure, work shifts, and lift up to 25 lbs.

  AutoCAD, SolidWorks, DraftSight, CMMS, Microsoft Excel, Microsoft Word

• 7d

  FY27 Intern - Deep Learning Research Internship - Embodied AI - Canada (4 Months)

  Markham, ON

  On-siteInternship

  

  Qualcomm Canada ULC

  1+ YOECandidates need a strong foundation in deep learning, machine learning or robotics, plus proficiency in Python and PyTorch. Enrolment in a bachelor's, master's or PhD engineering or computer science program, with 1+ years of academic programming, is required.

  Python, PyTorch, robotics simulators

  7d

  FY27 Intern - Silicon Validation Internship - Canada (16 months)

  Toronto, ON

  On-siteInternship

  

  Qualcomm Canada ULC

  1+ YOEQualcomm Canada needs students in an engineering or computer science bachelor's program, available May/June 2027 to August/September 2028, with 1+ years of programming experience. Lab equipment experience and scripting in Python, Perl, TCL or Shell are preferred.

  oscilloscope, multimeter, Python, Perl, TCL, Shell

• 7d

  Privacy Counsel and Data Protection Officer

  Richmond Hill, ON

  HybridFull Time

  

  Mecka

  5+ YOEMecka needs a law degree, admission to practice in at least one jurisdiction, and 5 to 8+ years of privacy practice, including time at a top tier law firm and in-house at a high-growth technology or data company. Candidates must show multi-jurisdiction experience with consent, transfers, impact assessments, breach response and regulator registration.

  Data protection, Regulatory compliance, Machine learning

17 companies