“Engine calibration devices” jobs in Canada

No matching filters. Try another name.

Results

• 3h

  Layout Design Co-op (Winter 2027)

  Ottawa, ON

  $25–$34/hrFull Time

  CC

  Ciena Canada ULC

  Candidates need to be enrolled in an Electrical Engineering or related degree program, with experience in custom analog and mixed-signal layout. Knowledge of deep-submicron CMOS, layout matching and parasitics, and industry layout tools is also required.

  Cadence Virtuoso, Siemens Calibre, SKILL

  1d

  Lead Analog Layout Engineer

  Ottawa, ON

  $142k–$226k/yrRemoteFull Time

  CC

  Ciena Canada ULC

  5+ YOECandidates need a Bachelor's degree or higher in Electrical Engineering or a related field and 5+ years of custom analog or mixed-signal IC layout experience, including completed tapeouts. Ciena requires hands-on skill with Cadence Virtuoso and Siemens Calibre, plus knowledge of matching, parasitics and deep-submicron CMOS.

  Cadence Virtuoso, Siemens Calibre, Ansys Totem

• 4h

  Ops NPI Project Manager

  Ottawa, ON

  Full Time

  VS

  Viavi Solutions Canada ULC

  5+ YOEViavi Solutions Canada ULC needs a candidate with 5+ years of NPI project management in an electronics or photonics environment. The candidate should hold a bachelor's degree in electrical or optical engineering, physics or a related field, and understand optical hardware well enough to work with R&D.

• 11h

  Application Engineer

  Toronto, ON

  Full Time

  MT

  Modern Technical Staffing Inc.

  5+ YOECandidates need an engineering degree or equivalent and 5+ years of engineering experience in areas such as robotics, automation, machine vision or optical microscopy. C++ proficiency and strong communication, documentation and customer relations skills are required.

  Visual Studio

• 13h

  Manager, Test & Validation Engineering

  Kanata, ON

  Full Time

  I

  Inpho

  10+ YOE3+ MgmtInpho requires a Bachelor's or Master's degree in Electrical Engineering, Engineering Physics or a related field. Candidates need 10+ years of hands-on high-speed photonics or electro-optical test experience and 3+ years of technical people leadership.

  Lead a team, Leadership, Electrooptics, Optical components, Test automation, Data analysis

  14h

  Equipment Engineer (Semiconductor & Photonic)

  Halifax, NS

  Full Time

  I

  Inpho

  3+ YOEInpho needs candidates with a bachelor's degree in electrical, mechanical, optical engineering or physics and 3 to 7+ years of hands-on experience with electro-optical test, pick and place or inspection equipment. Candidates need knowledge of lasers, optics, machine vision and electromechanical troubleshooting.

  Automated pick and place machines, Automated optical inspection (AOI) systems, Machine vision systems

  19h

  Senior Electro-Optical Validation Engineer

  Kanata, ON

  Full Time

  I

  Inpho

  8+ YOECandidates need 8+ years of hands-on high-speed electrical, RF or electro-optical experience, including IMDD and PAM4 testing and InP component validation. They also need strong Python or MATLAB data analysis skills, expertise setting up high-speed test equipment, and a degree in electrical engineering, engineering physics or a related field.

  Keysight, Anritsu, Python, MATLAB, Pandas, Plotly

  1d

  Junior Electro-Optical Validation Engineer

  Kanata, ON

  Full Time

  I

  Inpho

  Candidates need a Bachelor's or Master's degree in electrical engineering, engineering physics, or a related field, with 0 to 2 years of experience. Python skills for data analysis and automation are required, and exposure to lab instruments, S-parameters, and semiconductor devices is an asset.

  Python, Pandas, NumPy, Plotly, Matplotlib, Oscilloscope

• 15h

  Instrumentation & Control Technician

  Montréal, QC

  Full Time

  TP

  The People Co.

  5+ YOECandidates need a bachelor's degree in mechanical, electrical or manufacturing engineering or a related field, plus over five years of relevant experience. They must read electrical schematics and P&IDs, work in Ladder Logic and FBD, know industrial networks such as Ethernet/IP, and be fluent in French and English.

  Allen-Bradley PLC, HMI, SCADA, Ethernet/IP

• 17h

  Electrical and Automation Engineer

  Kingston, ON

  Full Time

  CR

  Canada Royal Milk

  5+ YOECandidates need a bachelor's degree in electrical engineering and 5+ years in a manufacturing environment. They must read schematics and program PLCs in Rslogix5000 and Wonderware, and have instrumentation calibration and project management experience. A P.Eng. is an asset.

  Rslogix5000, Wonderware, Siemens, CMMS, VFD, PLC

• 17h

  Automated Visual Inspection & Instrumentation Specialist – Pharmaceutical Manufacturing

  Montréal, QC

  Full Time

  EF

  Efor (formerly PharmEng Technology)

  Candidates need an engineering, automation or instrumentation diploma or degree and hands-on experience with automated visual inspection, ideally in pharma or medical devices. Machine vision knowledge, GMP experience and validation documentation skills are required.

  Körber/Seidenader AVI platforms, Machine vision cameras and optics

• 17h

  Analog Validation & Characterization Engineer

  Montréal, QC

  Full Time

  H

  HaiLa

  5+ YOECandidates need a BS or MS in electrical engineering or a technologist diploma with equivalent experience, plus 5+ years in analog, RF or mixed-signal test and validation. They must have PCB bring-up, RF matching-network tuning, SCPI instrument automation in Python, and PVT characterization experience.

  Analyseurs de réseaux, Analyseurs de spectre, Analyseurs de protocoles, Oscilloscopes, Alimentations, Multimètres de précision

  20h

  Analog Validation & Characterization Engineer

  Ottawa, ON

  Full Time

  H

  HaiLa

  5+ YOECandidates need 5+ years of analog, RF or mixed-signal test and validation experience, plus a BS/MS in electrical engineering or a technologist diploma with equivalent experience. Strong Python, SCPI instrument control, PCB bring-up and PVT characterization skills are required.

  network analyzer, spectrum analyzer, protocol analyzer, oscilloscope, signal generator, precision DMM

• 18h

  Electrical Journeyman with Instrument experience

  Fort St. John, BC

  Full Time

  EI

  Epscan Industries Ltd.

  3+ YOECandidates need a Journeyman Electrical Red Seal certification, a valid driver's licence and three or more years of oilfield industrial experience. They must hold CSO, Intermediate First Aid and H2S Alive training and work safely alone on live equipment.

  Instrumentation test equipment, Hart communicator, PLC, RTU, Pressure, level and temperature transmitters, VFD

• 20h

  Principal Analog/Mixed-Signal IC Design Engineer

  Vancouver, BC

  Full Time

  SI

  Stathera, Inc.

  12+ YOECandidates need an MS with 12+ years of relevant experience or a PhD with 8+ years of industry experience designing analog and mixed-signal circuits. They must have led full-chip designs through multiple tape-outs and know analog blocks such as bandgaps, PLLs, data converters and switched-capacitor circuits.

  Cadence Virtuoso, Synopsys Custom Compiler, Spectre, HSPICE, AFS, MATLAB

• 21h

  EIC Measurement Technician

  Canada

  Full Time

  TP

  TransCanada PipeLines Limited

  2+ YOECandidates need a high school diploma and either three years of an applicable trades program or two years of technical training plus two years of relevant experience. A valid Class 5 licence, a clean pre-employment medical and drug screening, and strong troubleshooting and communication skills are required.

  SAP, PLC, flow computer, gas chromatograph, gas quality analyzer, transmitter

• 22h

  Biomedical Equipment Technologist

  Edmonton, AB

  

  MIC Medical Imaging: Saskatchewan, Grey Nuns, Mazankowski Heart Institute, Royal Alexandra, Stollery Children’s, Strathcona Community, Sturgeon General, Leduc Community…

  2+ YOEMIC Medical Imaging needs candidates with at least 2 years of diagnostic imaging service experience and electronics training. Strong troubleshooting, communication and documentation skills are required, and a valid driver's licence with a reliable vehicle is mandatory.

  PACS, DICOM, test equipment, hand tools

• 1d

  Field Service Engineer / Calibration Specialist

  Toronto, ON

  Full Time

  OT

  O'Hara Technologies Inc.

  6+ YOECandidates need 6+ years of servicing oral solid dosage equipment, calibration experience in a cGMP environment, and the ability to read electrical and pneumatic schematics. A technical diploma or certification in mechanical, electrical or instrumentation technology, or equivalent experience, is required.

  PLC, HMI, VFD, hand tools, power tools

• 1d

  PCB Design Engineer II

  Markham, ON

  Contract

  T

  TekWissen ®

  3+ YOECandidates need an electronics engineering technology diploma or equivalent practical experience, typically 3 to 5 years in board-level troubleshooting or rework. They must show hands-on microscope soldering and fine-pitch BGA skills, and be comfortable with oscilloscopes, multimeters and power supplies.

  BGA rework station, Hot-air rework tool, Board preheater, Microscope, Oscilloscope, Digital multimeter

• 1d

  Outage Technician/Technologist

  Tiverton, NS

  

  Kinectrics: Kinectrics is an integrated lifecycle management services company providing testing, inspection, certification and engineering consulting for the…

  5+ YOECandidates need engineering technology education (three years at a college) and about five years of related experience, or equivalent advanced education. They need knowledge of mechanical systems, machine design, electricity, and quality assurance, plus travel to nuclear sites and the ability to obtain a security clearance.

  Microsoft Office, Visual inspection equipment, Motion control hardware, Instrumentation

• 2d

  Quality Inspector in Oakville

  Oakville, ON

  $23–$25/hrOn-siteFull Time

  

  Thermon: Through its global network, Thermon provides safe, reliable and innovative mission critical industrial process heating solutions.

  Candidates need a high school diploma or equivalent, good communication skills, and the ability to read electrical and mechanical drawings and inspection test plans. They also need metrology skills with measuring tools such as calipers and micrometers, and comfort with fractions and metric measurements.

  Vernier calipers, Micrometers, Tape measure, Gauges, Measuring instruments

• 2d

  AMS Design Verification Engineer

  Mississauga, ON

  S

  Synopsys

  5+ YOESynopsys needs candidates with a degree in electrical or computer engineering and strong knowledge of analog and mixed-signal circuits. Candidates should know SystemVerilog and UVM, have used AMS simulation tools, and be comfortable scripting in Python, Perl or shell.

  HSPICE, XA, CustomSim, VCS, SystemVerilog, UVM

• 2d

  Industrial Engineering - Electrical Manufacturing Technologist

  Brant, ON

  TI

  Tigercat Industries

  Candidates need an education or experience in electrical, industrial or manufacturing engineering, plus strong Excel skills and familiarity with SolidWorks or AutoCAD. Strong communication, the ability to read blueprints, and comfort with changing priorities are also needed.

  Microsoft Excel, SolidWorks, AutoCAD, Test equipment

  2d

  Welder

  Brant, ON

  TI

  Tigercat Industries

  Candidates need knowledge of fabrication and fitting, welding skills, and the ability to read blueprints and engineering drawings. They must follow safety rules, work in heat and changing conditions, and be comfortable standing, climbing, kneeling and bending.

  Welding machines, Overhead crane, Jib crane, Technical drawings

18 companies