“High voltage equipment” jobs in Canada

No matching filters. Try another name.

Results

• 4h

  Senior Electrical Engineer

  Vancouver, BC

  TT

  Tetra Tech

  10+ YOECandidates need a bachelor's degree in electrical engineering, a Professional Engineer designation or eligibility to register, and at least 10 years of electrical engineering experience. Low and medium voltage design, protection relaying, and power utility work such as substation design are required.

  4h

  Senior/Lead Electrical Engineer

  Calgary, AB

  TT

  Tetra Tech

  10+ YOECandidates need a bachelor's degree in electrical engineering or an electrical technologist program, plus a Professional Engineer designation in Alberta and/or BC. They need at least 10 years of electrical engineering experience, including low and medium voltage design and protection or power system studies.

  4h

  Intermediate Electrical Engineer

  Vancouver, BC

  TT

  Tetra Tech

  5+ YOECandidates need a bachelor's degree in electrical engineering or a related field, and a Professional Engineer designation or eligibility to register with the provincial association. At least 5 years of electrical engineering experience is required, including low and medium voltage design and protection or power system studies.

  Communication skills, Research, Coaching, Health and safety, Electrical engineering, P.Eng.

  5h

  Structural Engineer

  Calgary, AB +4

  TT

  Tetra Tech

  1+ YOECandidates need 1-6 years of structural engineering experience, including steel and foundation design for substations, transmission lines and industrial buildings, plus a bachelor's degree in civil or structural engineering. Strong design software skills and attention to detail are required.

  AutoCAD, MathCAD, STAAD, S-Frame, RISA, LPILE

  5h

  Senior Structural Engineer

  Mississauga, ON +4

  TT

  Tetra Tech

  10+ YOECandidates need 10+ years of structural engineering experience in steel and foundation design for power and industrial projects, a civil or structural bachelor's degree and a Canadian P.Eng. licence. Strong leadership, communication, and analysis skills and proficiency with structural analysis and transmission design software are also needed.

  AutoCAD, MathCAD, MS Office, STAAD, SFrame, RISA

  5h

  Senior Electrical Engineer

  Mississauga, ON +4

  TT

  Tetra Tech

  10+ YOECandidates need a university degree in Electrical Engineering, over 10 years of electrical engineering experience, and strong knowledge of utility substation and distribution design. A Professional Engineer registration in Canada or the United States is preferred, along with experience in renewable energy, HVDC and 3D design software.

  3D design software

  5h

  Electrical Engineer, Senior/Intermediate - Solar & BESS

  Mississauga, ON +4

  TT

  Tetra Tech

  7+ YOECandidates need a Bachelor's in Electrical Engineering, 7+ years of power or renewable energy experience, and strong knowledge of solar PV, BESS, substations, and protection systems. A P.Eng. or PE designation (or eligibility for it) and proficiency with ETAP, CYME, PVsyst and related tools are required.

  ETAP, CYME, PVsyst, PVCase, AutoCAD, Revit

  5h

  Senior Substation Engineer

  Mississauga, ON +4

  TT

  Tetra Tech

  12+ YOECandidates need a university degree in electrical engineering, over 12 years of substation and medium and high voltage design experience, and a registered Professional Engineer licence in the US or Canada. Strong communication skills and experience with protection, control and metering systems are required.

  3D design software

  5h

  Intermediate Electrical Engineer – Heavy Industrial/Nuclear

  Mississauga, ON +1

  TT

  Tetra Tech

  4+ YOECandidates need a bachelor's degree in electrical engineering, a P.Eng. in Ontario or progress toward one, and 4-8 years of electrical engineering experience in heavy industry or power generation. Knowledge of the Canadian Electrical Code, CSA and IEEE standards, and power system studies is needed, with ETAP an asset.

  ETAP

• 5h

  Senior Substation Physical Designer 2 - Grid

  Remote in Canada

  $77k–$118k/yrRemoteFull Time

  

  Jobgether

  12+ YOECandidates need at least 12 years of substation physical design experience and an associate degree in drafting, or a high school diploma plus two years of drafting coursework. They must be skilled in AutoCAD and/or MicroStation and able to visualize components in three dimensions. Candidates must already be authorized to work in Canada and be citizens of a country listed in Appendix A to Part 810 of the U.S. CFR.

  AutoCAD, MicroStation

• 8h

  Level 1 Security Systems Technician

  Concord, ON

  $35/hrFull Time

  

  New Age Group

  2+ YOECandidates need 2+ years of security, low-voltage, electrical or structured cabling experience, including commercial security system installation. They must read drawings and floor plans and hold Working at Heights, WHMIS and a valid Ontario driver's licence.

  Axis cameras, Belden cable, fiber optic cable, EMT conduit, alarm panels, access control readers

  8h

  Alarm & Service Technician

  Concord, ON

  $35/hrFull Time

  

  New Age Group

  3+ YOECandidates need at least 3 years installing and servicing commercial alarm systems, strong knowledge of DSC PowerSeries/Neo, Qolsys IQ4 and Alarm.com, and the ability to read floor plans and wiring schematics. A valid Ontario driver's licence with a clean record and the ability to work independently are required.

  DSC PowerSeries, DSC Neo, Qolsys IQ4, Alarm.com, alarm communicators

• 9h

  Electrical Reliability Lead

  Cardinal, ON

  $106k–$141k/yrFull Time

  IC

  Ingredion Canada Corporation

  3+ YOECandidates need a bachelor's degree in electrical engineering or 3 to 6 years of industrial experience, with knowledge of electrical distribution, power systems and hazardous locations. Experience with PLCs, DCS, motors, VFDs and electrical codes, plus leadership and project management skills, is required.

  Allen Bradley PLC, Modicon PLC, Foxboro I/A DCS, Aspen IP.21, Motor soft starters

• 12h

  Commissioning Instrumentation Lead (Instrumentation Red Seal)

  Edmonton, AB

  $80/hrContract

  

  Grizzlytrek Group: "Technical & Indigenous Staffing Company"

  7+ YOE5+ MgmtCandidates need a Red Seal Journeyman Instrumentation ticket, 7 to 15 years of experience with 5 years leading commissioning and start-up, and six safety tickets. Strong electrical, instrumentation and automation skills in power generation and protection relay testing are required.

  P&IDs, single line diagrams, loop diagrams, VFDs

  12h

  Commissioning Electrical Lead (Electrical Red Seal)

  Edmonton, AB

  $80/hrContract

  

  Grizzlytrek Group: "Technical & Indigenous Staffing Company"

  7+ YOE5+ MgmtCandidates need a Journeyman Electrical Red Seal, 7 to 15 years of experience with 5 years leading commissioning and start-up, and six safety certifications including CSTS-20, Basic Scaffold Safety, Fall Protection, Confined Space Entry, WHMIS and H2S Alive.

  Megger, VFD, Switchgear, Transformers, ATS, UPS

• 13h

  Technical Analyst - Mississauga, ON

  Mississauga, ON

  $41–$46/hrFull Time

  

  Intertek Canada: Intertek is a leading Total Quality Assurance provider to industries worldwide.

  5+ YOEIntertek Canada needs candidates with 5+ years of directly related experience, an engineering degree or diploma (electrical preferred), and knowledge of product safety standards. Strong communication, organization, Microsoft Office and independent problem-solving skills are required, along with a valid driver's licence.

  spectrum analyzer, oscilloscope, multi-meter, dielectric strength tester, ground continuity tester, surge generator

• 13h

  Distribution Engineer

  Red Deer, AB

  $53.94–$67.42/hrHybrid

  

  The City of Red Deer

  5+ YOECandidates need an electrical engineering degree with P.Eng status from APEGA, plus about five years of electric utility experience. The role also requires strong report writing, power system knowledge and the ability to manage multiple projects under time pressure.

• 14h

  Powerline Technician

  Fort Erie, ON

  CN

  CANADIAN NIAGARA POWER INC.

  Candidates need a Journeyperson Powerline Technician certificate or completed Powerline Technician Level 2 apprenticeship schooling, a valid Ontario Restricted DZ or ARZ driver's licence, and an excellent safety record. Strong teamwork, communication and problem-solving skills are also required.

  bucket truck, line materials, voltage regulators, transformers, switches

• 14h

  Journeyman Powerline Technician

  Calgary, AB

  Full Time

  

  Black & McDonald Limited: Black & McDonald is an integrated, multi-trade service provider that safely delivers high-quality construction, facilities management, and technical…

  5+ YOECandidates need at least 5 years as a Journeyman Powerline Technician, a Journeyman Powerline Technician certificate and a high school diploma. They also need a Class 3 licence with air brakes, experience with energized 25kV to 230kV lines, and the ability to work outdoors at heights and in confined spaces.

  articulated bucket truck, digger derrick, hot line tools, electrical testing devices, utility construction tools

• 14h

  Welder/Machine Operator

  Bradford, ON

  $28/hrOn-siteFull Time

  MC

  MiTek Canada Inc

  1+ YOECandidates need a high school diploma or GED and one to three years of related welding experience or training. They must read simple engineered drawings with some help, do basic maths, and work reliably on every scheduled shift.

  ARC welding equipment, MIG welding equipment, welding torch, cutting torch, welding machine, Windows

• 14h

  Directeur(trice), Maintenance / Director, Maintenance

  Saint-Michel-des-Saints, QC

  Full Time

  N

  NMG

  15+ YOE7+ MgmtCandidates need a mechanical or industrial engineering bachelor's degree, OIQ membership or eligibility, 15+ years of industrial or mining maintenance with 7+ in leadership, and CMMS and reliability experience. Full professional French is required.

  SAP PM, Maximo, GMAO

• 15h

  Ingénieur Hardware

  Montréal, QC

  $45–$50/hrContract

  

  Actalent: Actalent is an operating company of Allegis Group, the global leader in talent solutions.

  2+ YOEMinimum de 2 ans d'expérience en conception électronique; Expérience en conception de PCB et de schémas; Expérience en layout et en tests matériels

  Altium Designer

• 16h

  Technician II - Security

  Vancouver, BC

  $27.70–$38.91/hrFull Time

  

  Bosch Building Technologies

  3+ YOECandidates need 3 to 5 years of technical experience in integrated security, with cable pulling, CCTV, alarm and access control skills. A valid driver's licence with a clean abstract and strong communication skills are required.

  power tools, hand tools

  16h

  Technician I - Security

  Vancouver, BC

  $20.50–$29.69/hrFull Time

  

  Bosch Building Technologies

  1+ YOECandidates need 1-3 years of technical experience in integrated security, cable pulling and basic troubleshooting, and experience with CCTV and alarms. A valid driver's licence with a clean abstract and the ability to work independently are required.

  power tools

13 companies