“fluid pump” jobs in Canada – Page 2

No matching filters. Try another name.

Results

• 4d

  Trades Worker II

  Newfoundland and Labrador

  Temporary

  

  Newfoundland and Labrador Health Services

  Newfoundland and Labrador Health Services requires a valid Fourth-Class Power Engineer's Certificate issued by the Province of Newfoundland and Labrador, plus the ability to troubleshoot and work independently. Candidates also need strong communication skills, a satisfactory work and attendance record, and a Certificate of Conduct. Health care experience and 3 to 5 years operating a power plant are preferred.

  Steam boilers, Pumps, Air compressors, Sterilizer, Hydraulic operating room tables, Hand tools

  4d

  Trades Worker I

  Newfoundland and Labrador

  Full Time

  

  Newfoundland and Labrador Health Services

  1+ YOECandidates need a one-year post-secondary trades certificate in a building, electrical, plumbing or mechanical trade, and at least one year of trades experience in the last five years. They also need a valid Class V licence, infection control experience, the ability to lift over 50 lbs, and an RCMP or police Certificate of Conduct.

  power tools, table saws, electric drills, voltage meter, hand tools, ladders

• 4d

  Millwright

  Nisku, AB

  $40/hrContract

  

  Randstad Canada

  Candidates need an active Alberta Journeyperson Millwright ticket or Red Seal endorsement, plus proven hands-on gearbox rebuild and hydraulic repair experience. Strong diagnostic skills and clear English for logging repairs are also required.

  Laser alignment equipment, Dyno test equipment, Hydraulic test equipment

  4d

  Maintenance Technician | Straight days

  Mississauga, ON

  $46–$52/hrFull Time

  

  Randstad Canada

  5+ YOECandidates need a Certified Industrial Millwright (433A) or 5+ years of mechanical maintenance experience in fast-paced manufacturing. Strong troubleshooting of hydraulic, pneumatic and mechanical failures, basic MIG welding and strict lockout/tagout practice are required.

  CMMS, lathe, drill press, band saw, torque-fastening tools, plant-floor tablets

  5d

  Industrial Mechanic | Hydraulics and Machine Rebuilds

  Brampton, ON

  $31–$35/hrFull Time

  

  Randstad Canada

  3+ YOECandidates need at least 3 years of mechanical maintenance experience in industrial manufacturing. Strong troubleshooting skills with hydraulics, bearings, gearboxes and drive systems are required, and basic electrical diagnostic knowledge is an asset.

  bearing press, manual mill, lathe, overhead crane, punch press, press brake

• 4d

  Heavy Equipment Technician

  Clairmont, AB

  Full Time

  ?

  Structured technical training and PowerGen qualification; Identify equipment faults, abnormal operating conditions and failure causes; select appropriate corrective actions within your qualifications and authorization;…

  Heavy duty technician, Mechanical systems, Hydraulic fracturing, Troubleshooting, Coaching, Troubleshoot

• 4d

  FACILITATOR (Software - virtual)

  Toronto, ON

  RemoteContract

  P

  PulseLearning

  3+ YOECandidates need expert hands-on knowledge of PIPE-FLO, AGi32 or ElumTools from professional work, plus 3+ years of technical adult training experience. They also need strong virtual classroom skills, reporting experience and the ability to pass and maintain a security clearance.

  PIPE-FLO, AGi32, ElumTools, Autodesk Revit, Microsoft Teams, Zoom

• 4d

  Power Engineer/HVAC Technician Journeyperson I

  Alberta

  LP

  Lethbridge Polytechnic

  5+ YOECandidates need a 5th Class Power Engineer Certificate, at least 5 years of mechanical operations experience, an unrestricted Class 5 driver's licence, and proficiency with Windows-based systems and Microsoft Office.

  boiler, glycol pumps, air handling units, air compressors, Microsoft Office

• 4d

  Outside Sales Rep - Fluid Solutions

  Fort McMurray, AB

  Full Time

  UR

  United Rentals of Canada, Inc.

  3+ YOECandidates need a bachelor's degree or equivalent experience and three years of sales experience. Strong relationship, communication, planning and negotiation skills are required, a valid driver's licence with a good driving record is needed, and construction equipment knowledge is preferred.

  CRM tools

• 5d

  Senior Staff Accountant

  Ontario

  

  Spirax-Sarco Ltd.

  Candidates need a bachelor's degree in accounting or finance and proven accountant experience with strong knowledge of accounting standards. Strong Excel skills and large ERP experience are required, with Microsoft AX as an asset.

  Excel, ERP system, Microsoft AX

• 5d

  Research Technician - Surgical Support and Overnight Care

  Vancouver, BC

  Full Time

  UT

  UBC The University of British Columbia

  4+ YOECandidates need a university degree or technical program plus four years of related experience, along with hands-on surgical and animal care skills. Preferred qualifications include Registered Veterinary Technician designation, RLAT or RLATR CALAS certification, and experience with large animal surgery.

  Veterinary anesthetic machines, Diagnostic and imaging devices, Monitoring equipment, Specialized research equipment for in-vivo spinal cord characterization

  5d

  Research Technician - Animal Behaviour Training & Care

  Vancouver, BC

  Full Time

  UT

  UBC The University of British Columbia

  3+ YOECandidates need a relevant technical diploma or university degree and at least three years of related experience. Experience with large animal or laboratory animal care and animal behaviour training is valued, as are RVT and RLAT/CALAS certification.

  Anesthetic machines, Anesthetic monitoring equipment, Pulse oximeter, Doppler, IV fluid pumps, Syringe pumps

• 5d

  General Labourer - Morning Shift

  Toronto, ON

  On-siteFull Time

  

  Armstrong Fluid Technology: With advanced solutions that leverage edge computing, IoT, machine learning, digital twin technology and demand-based control, Armstrong provides…

  Candidates need hands-on experience with overhead and jib cranes and material handling equipment such as pallet trucks. They must be able to lift up to 50 lbs, read work instructions, and work at a fast pace in a hot, dusty environment.

  Drills, Band saws, Compressors, Overhead cranes, Jib cranes, Pallet trucks

  6d

  General Labourer - (12:00am - 7:30am)

  Toronto, ON

  On-siteFull Time

  

  Armstrong Fluid Technology: With advanced solutions that leverage edge computing, IoT, machine learning, digital twin technology and demand-based control, Armstrong provides…

  Candidates need hands-on experience with overhead cranes and material handling equipment such as pallet trucks. They must read work instructions, use measuring tools, and lift up to 50 lbs in hot, humid, dusty conditions.

  overhead crane, jib crane, pallet truck, compressor, drill, band saw

• 6d

  Application Engineer

  Calgary, AB

  

  ITT Inc. - English US: (NYSE: ITT) is a diversified global leading manufacturer of highly engineered critical components and customized technology solutions serving the…

  3+ YOECandidates need at least 3 to 5 years of rotating equipment experience, ideally with centrifugal pumps or fluid-handling systems. They should read engineering drawings and standards such as API, ANSI and Hydraulic Institute, communicate clearly and manage several deadlines independently.

  Microsoft Office

• 6d

  Class 1 Driver

  St. John's, NL

  

  GFL Environmental: GFL Environmental is the only major diversified environmental services company in North America offering services in solid waste management, liquid…

  Candidates need a valid Class 1 licence with air brake and manual transmission endorsements, and must pass pre-employment drug and alcohol testing. They must be able to lift and handle 50+ lbs of hose, work long hours and on-call, and ideally hold H2S Alive, First Aid/CPR, Confined Space Entry and TDG certifications.

  vacuum truck, hoses, booms, valves, Geotab, vacuum pumps

  6d

  Class 1 Driver

  St. John's, NL

  

  GFL Environmental: GFL Environmental is the only major diversified environmental services company in North America offering services in solid waste management, liquid…

  Candidates need a valid Class 1 licence with air brake and manual transmission, and must pass pre-employment drug and alcohol testing. They must be able to lift and handle hoses over 50 lbs, work long and on-call hours, and ideally hold H2S Alive, First Aid/CPR, Confined Space Entry and TDG certifications.

  vacuum truck, Geotab, hoses, booms, vacuum pumps

• 6d

  Warehouse Associate.

  Mississauga, ON

  $22–$24/hrFull Time

  JB

  John Brooks Company

  2+ YOECandidates need a high school diploma or GED and either a supply chain diploma or two years of warehouse or distribution experience. They must hold a forklift certificate, read and process pick tickets and shipping documents accurately, and be comfortable with RF scanners and vertical lift machines.

  RF scanner, Vertical lift machine (VLM), Counterbalance forklift

• 6d

  Class 1 Driver

  St. John's, NL

  Full Time

  GE

  GFL Environmental Services Inc.

  Candidates need a valid Class 1 licence with air brake and manual transmission endorsements and must pass pre-employment drug and alcohol testing. They must be able to lift, push and pull 50+ lbs and handle manual labour such as dragging hoses and working in confined spaces, and they must use the Geotab electronic logging system.

  vacuum truck, Geotab, ELD, hoses, booms, vacuum pumps

• 6d

  Sub-Contractors (Fluid Hauling)

  Saskatchewan +1

  Full Time

  HC

  Heavy Crude Hauling

  Heavy Crude Hauling needs experienced Class 1 operators with a clean driver's abstract, H2S, First Aid/CPR and EGSO/CSO tickets. The truck must have a fluid pump and positive air shut down.

  B-Train, fluid pump, positive air shut down

• 6d

  Pilot Plant Machinist

  Windsor, ON

  GC

  Gates Corporation

  7+ YOECandidates need an Ontario machining or tool and die apprenticeship, or equivalent CNC experience, with 7 to 10 years of CNC work including 5-axis milling. Strong skills in CAM programming, GD&T, probing, and Fanuc, HAAS or Matsuura controls are required.

  Mastercam, 5-axis CNC mill, HAAS, Fanuc, Matsuura

• 7d

  Mechanical Designer

  Calgary, AB

  Full Time

  EI

  Ecolab Inc.

  8+ YOECandidates need a diploma in mechanical engineering technology or a related bachelor's degree, 8+ years of experience including 3 years designing or manufacturing physical products, and proficiency in 3D CAD and drawing creation. Strong communication skills are also required.

  SolidWorks, PDM, PLM

• 7d

  Production Technician

  Mississauga, ON

  $21/hr

  

  Fresenius Kabi Canada: Fresenius Kabi Canada is a diverse pharmaceutical company committed to supplying high quality, cost-effective pharmaceutical products and services…

  1+ YOECandidates need one to two years of pharmaceutical industry experience and post-secondary education in science or a related field. A pharmacy technician diploma is an asset, along with strong adherence to GMP, SOPs and safety standards.

  eDMS, manufacturing equipment

• 7d

  Mechanical Designer

  Calgary, AB

  Full Time

  CC

  (CAN) CoolIT Systems Inc.

  8+ YOECoolIT Systems asks for a mechanical engineering technology diploma or a related bachelor's degree, plus 8+ years of relevant experience, including 3 years designing or manufacturing physical hardware. Candidates need strong 3D CAD and drawing skills, and good communication.

  SolidWorks

18 companies