“Schematics and technical documentation” jobs in Canada – Page 26

No matching filters. Try another name.

Results

• 24d

  Electronic Technician

  Vancouver, BC

  $59.69/hrFull Time

  

  Coast Mountain Bus Company Ltd: As the largest operating company in the integrated TransLink enterprise, Coast Mountain Bus Company (CMBC) operates more than 96 per cent of the…

  2+ YOECandidates need a two-year electronics diploma (such as BCIT) or an Industrial Electrician Red Seal, plus two or more years of related experience including DC repair on transportation electrical systems. A class 2 licence with air endorsement, a clean driver's abstract, and a medical exam are also required.

  diagnostic equipment, test equipment, electrical schematics

• 24d

  Senior Engineer

  Vancouver, BC

  $100k–$150k/yrFull Time

  BR

  BC Rapid Transit Co. Ltd

  8+ YOECandidates need an engineering degree and a Professional Engineering designation or eligibility to register with EGBC, plus eight years of senior engineering experience, preferably in transit or rail. Strong analytical, technical writing, project management and stakeholder communication skills are also required.

  FMECA

  24d

  Senior Mechanical Engineer

  Vancouver, BC

  $100k–$150k/yrFull Time

  BR

  BC Rapid Transit Co. Ltd

  8+ YOECandidates need an engineering degree in a required discipline, a Professional Engineering designation or eligibility with EGBC, and eight years of senior engineering experience, preferably in transit or rail. They also need advanced technical knowledge, strong report and risk-analysis skills, and good communication.

  FMECA

  24d

  Mechanical Engineer

  Vancouver, BC

  $92k–$138k/yrFull Time

  BR

  BC Rapid Transit Co. Ltd

  2+ YOECandidates need P.Eng. or P.L.Eng. eligibility with EGBC (EIT may be considered), 2 to 5 years of engineering experience and knowledge of railway operations and standards. Strong analytical, technical writing, project management and communication skills are required.

  FMEA, FMECA

• 24d

  Junior Mechanical Designer

  Kelowna, BC

  On-siteFull Time

  MP

  Multi-Power Products Ltd.: Multi-Power is a leading Canadian manufacturer of drilling equipment.

  1+ YOECandidates need 1 to 5 years of design and manufacturing experience on mobile or heavy equipment, an engineering degree, and proficiency in SolidWorks and stress analysis by hand calculation and FEA. An EIT or P.Eng designation in Canada is required, with EGBC registration preferred.

  SolidWorks, FEA software, Spreadsheets

• 24d

  Maintenance Technician

  Richmond Hill, ON

  $30–$35/hr

  TW

  The Wohl Group - Recruitment Made Easy!

  3+ YOE2+ MgmtCandidates need 3-5 years of hands-on industrial maintenance experience and 2 years of supervisory or team lead experience. Strong mechanical and electrical skills, excellent English and a related engineering degree or trade certificate are preferred.

  MS Office, welding equipment, production equipment

• 24d

  SCADA Project Engineer

  Richmond Hill, ON

  Full Time

  

  RRC POWER AND ENERGY

  3+ YOECandidates need a bachelor's degree in an engineering discipline and 3+ years of SCADA, controls or automation experience. They also need knowledge of industrial protocols such as Modbus, DNP3 and OPC, the ability to read electrical drawings, and strong communication and travel readiness.

  SCADA systems, Microsoft Office

  24d

  Relay Settings Engineer

  Calgary, AB

  RemoteFull Time

  

  RRC POWER AND ENERGY

  5+ YOECandidates need a bachelor's degree in electrical or renewable energy engineering, 5+ years of relay or protection engineering experience, and a PE or P.Eng. licence or the ability to obtain one. Strong knowledge of relay types, IEEE and NERC standards, and power system analysis tools is required.

  ETAP, ASPEN, SKM, CAPE

  24d

  Electrical Engineer III - Substation P&C

  Calgary, AB

  RemoteFull Time

  

  RRC POWER AND ENERGY

  5+ YOECandidates need a bachelor's degree in electrical or renewable energy engineering, 5+ years of power system or substation P&C experience, and familiarity with analysis software and IEEE, NERC, NEC and NESC standards. A PE license is preferred or must be obtainable.

  PSSE, ETAP, ASPEN, SKM, Microsoft Word, Microsoft Excel

  24d

  Relay Settings Engineer

  Calgary, AB

  RemoteFull Time

  

  RRC POWER AND ENERGY

  5+ YOERRC Power and Energy needs candidates with a Bachelor's in electrical or renewable energy engineering and 5+ years in relay settings or protection engineering. Candidates need a PE or P.Eng. (or the ability to get one), knowledge of IEEE and NERC standards, and experience with ETAP, SKM or similar tools.

  ETAP, ASPEN, SKM, CAPE

  24d

  Electrical Engineer III - Substation P&C

  Calgary, AB

  RemoteFull Time

  

  RRC POWER AND ENERGY

  5+ YOECandidates need a bachelor's degree in electrical or renewable energy engineering, at least 5 years of power system or substation experience, and hands-on knowledge of relays and P&C design. Familiarity with power system analysis tools, IEEE, NERC, NEC and NESC standards, and strong communication skills are also required.

  PSSE, ETAP, ASPEN, SKM, SCADA, Microsoft Word

• 24d

  SCADA Project Engineer

  Richmond Hill, ON

  Full Time

  

  RRC SCADA SOLUTIONS

  3+ YOECandidates need a bachelor's degree in Electrical, Computer or Automation Engineering, plus 3+ years with SCADA systems, controls or automation. Familiarity with SCADA architecture, industrial protocols (Modbus, DNP3, OPC, IEC), electrical drawings and Microsoft Office is expected, along with strong communication and organization skills.

  SCADA systems, Microsoft Office

• 24d

  Senior Controls & Automation Engineer

  Vaughan, ON

  Full Time

  

  JP Recruitment

  5+ YOECandidates need a bachelor's degree in electrical engineering or an electrical engineering technology diploma, and at least 5 years of industrial automation experience. Hands-on commissioning on projects over $10M and experience with Rockwell and Inductive Ignition platforms are needed.

  Rockwell FactoryTalk, RSView32, Inductive Ignition, AutoCAD, MS Project, Excel

• 24d

  Analog IC Design Engineer

  Toronto, ON

  T

  Talentlab

  5+ YOECandidates need an MSc or PhD in electrical engineering or a related field and 5+ years of analog IC design experience, preferably silicon-proven. They need hands-on advanced CMOS experience, SPICE and Verilog-A simulation skills, and EDA tool proficiency.

  SPICE, Verilog-A, EDA tools

• 24d

  Hydraulic Technician

  Hamilton, ON

  $30–$40/hr

  

  STRIVE Recruitment: STRIVE is a specialist recruitment firm offering proactive recruitment solutions in the areas of Accounting & Finance, Corporate Administration,…

  5+ YOECandidates need at least 5 years of hydraulic experience in an industrial setting, along with knowledge of hydraulic components and the ability to read engineering drawings and schematics. A valid passport is required for possible global travel.

  engineering drawings, schematics

  24d

  Electrical Technician

  Hamilton, ON

  $27.40–$30.29/hrTemporary

  

  STRIVE Recruitment: STRIVE is a specialist recruitment firm offering proactive recruitment solutions in the areas of Accounting & Finance, Corporate Administration,…

  Candidates need an electrical, electronics or control engineering technician diploma and hands-on experience with assembly, wiring and soldering. They must read schematics, use hand and power tools, and work independently in a manufacturing setting.

  Hand tools, Power tools, Soldering equipment, Test equipment

• 24d

  Machine Building and Maintenance Technician

  Acton, ON

  

  Superior Glove: Leading manufacturer + supplier of work safety gloves.

  3+ YOESuperior Glove needs candidates with at least 3 years of manufacturing equipment maintenance experience, a college diploma or certificate in a mechanical, mechatronics or industrial maintenance field, and practical fabrication and troubleshooting skills. A valid passport and ability to travel are required; CAD and PLC knowledge are assets.

  SolidWorks, PLC, Machining tools, Hand tools

• 24d

  Complex Security Systems Technician

  Calgary, AB

  $30–$41.50/hrFull Time

  JC

  Johnson Controls LP CAN

  Candidates need hands-on experience installing and servicing access control, CCTV, intrusion and intercom systems, plus working knowledge of electricity, electronics and Windows-based computers and networks. A valid Class 5 driver's licence with a clean record is required, and CCURE 9000 or Genetec certification is preferred.

  C-Cure 9000, Genetec, Kantech, Lenel S2, Milestone, Exacq

• 24d

  Field Services Technician III, Electrical Testing

  Edmonton, AB

  $55–$60/hrFull Time

  

  Shermco Industries, Inc.: Shermco Industries is a provider of safe, reliable testing, repair, professional training, electrical outage planning, maintenance and analysis of…

  3+ YOEShermco needs candidates with a diploma in electrical engineering technology or a related field and three to five years of electrical testing experience. Working knowledge of protective relays, transformers, switchgear and cable testing is required, along with strong Excel skills.

  Doble test equipment, PowerDB, Microsoft Excel

  24d

  Field Services Technician III, Electrical Testing

  Winnipeg, MB

  $40–$50/hrFull Time

  

  Shermco Industries, Inc.: Shermco Industries is a provider of safe, reliable testing, repair, professional training, electrical outage planning, maintenance and analysis of…

  3+ YOECandidates need an electrical engineering technology diploma or equivalent, three to five years of testing experience, and NETA Level II or III certification or progress toward it. Strong Excel skills and the ability to travel to the US and work overtime and on-call are required.

  Doble, PowerDB, Microsoft Excel, test equipment

  24d

  Field Services Technician III, Electrical Testing

  Edmonton, AB

  $55–$60/hrFull Time

  

  Shermco Industries, Inc.: Shermco Industries is a provider of safe, reliable testing, repair, professional training, electrical outage planning, maintenance and analysis of…

  3+ YOEShermco needs candidates with a diploma in electrical engineering technology or a related field and three to five years of electrical testing experience. Working knowledge of protective relays, transformers, switchgear and cable testing is required, along with strong Excel skills.

  Doble test equipment, PowerDB, Microsoft Excel

  24d

  Field Services Technician III, Electrical Testing

  Winnipeg, MB

  $40–$50/hrFull Time

  

  Shermco Industries, Inc.: Shermco Industries is a provider of safe, reliable testing, repair, professional training, electrical outage planning, maintenance and analysis of…

  3+ YOECandidates need an electrical engineering technology diploma or equivalent, three to five years of testing experience, and NETA Level II or III certification or progress toward it. Strong Excel skills and the ability to travel to the US and work overtime and on-call are required.

  Doble, PowerDB, Microsoft Excel, test equipment

• 24d

  Maintenance Apprentice (Millwright 433A)

  North Bay, ON

  

  Boart Longyear: Established in 1890, Boart Longyear is the world’s leading innovative provider of drilling services, manufacturer of productivity-driven drilling…

  2+ YOECandidates need a high school diploma, registration as a Millwright 433A apprentice in 3rd, 4th or 5th year, and 2 to 3 years of industrial maintenance experience. Fluent English, the ability to lift up to 50 lbs and comfort on a manufacturing shop floor are also required.

  CMMS, CNC equipment, Schematics and blueprints

  24d

  Electrician (309A Certification)

  North Bay, ON

  

  Boart Longyear: Established in 1890, Boart Longyear is the world’s leading innovative provider of drilling services, manufacturer of productivity-driven drilling…

  3+ YOECandidates need a valid Ontario 309A Construction and Maintenance Electrician certificate and 3 to 5 years of industrial or building maintenance experience. They must know electrical codes, PLCs, VFDs and motor controls, and be able to read schematics and work safely.

  PLC, VFD, Electrical testing equipment, Electrical schematics, Overhead cranes

13 companies