“Electronic assembly tools” jobs in Canada – Page 3

No matching filters. Try another name.

Results

• 1d

  Photonics Engineer, R&D

  Vancouver, BC

  Full Time

  DP

  Dream Photonics Inc.

  3+ YOECandidates need an engineering or physics bachelor's degree, 3+ years designing photonic components, and lab or R&D experience with photonic chips, lasers and optical fibre. They should know Python, electromagnetic simulation (FDTD, beam propagation, ray tracing) and GDSII layout tools with foundry PDKs.

  Python, KLayout, L-Edit, GDSII, FDTD, optical power meter

  1d

  Optical Test Engineer, R&D

  Vancouver, BC

  Full Time

  DP

  Dream Photonics Inc.

  3+ YOECandidates need a bachelor's degree in engineering, physics or materials science, at least 3 years of optical or photonic characterization experience, and strong Python skills. They should also be able to write clear technical documentation and work well across teams.

  Python, NumPy, Pandas, SciPy, KLayout, L-Edit

• 1d

  Electrical/Electronics Technician (Assembly, Testing & Installation)

  Toronto, ON

  Full Time

  MA

  Miri Africa

  Miri Africa needs candidates with an OND, HND or technical certification in electrical or electronics engineering, mechatronics or instrumentation, plus practical electronics assembly and troubleshooting experience. Strong soldering, wiring and testing skills and willingness to travel are also required.

  Multimeter, Oscilloscope, Power supply, Soldering station

• 1d

  General Labour – [Electronics Assembly] [Dispatch]

  Etobicoke, ON

  Temporary

  O

  OperationsCo

  Candidates need dependable attendance, availability to start immediately, good hand coordination and the ability to follow instructions for repetitive work. Soldering, crimping, electronics assembly or warehouse experience is an asset but not required.

  crimping tool, basic hand tools

• 1d

  Embedded Systems Design & DSP Engineer

  Newmarket, ON

  Full Time

  L

  Lotek

  5+ YOECandidates need an MSEE or BSEE and at least 5 years of relevant experience, with current digital signal processing skills, low-power circuit design, and bare-metal embedded C programming. Experience with ARM microprocessors, sensors, PCB layout and EMI/EMC is an asset.

  Altium, OrCAD, PSPICE, MATLAB

• 1d

  Technical Sales Representative

  Montréal, QC

  Full Time

  CT

  Core Tool Technologies

  5+ YOECandidates need 5+ years of technical sales experience, ideally in assembly or manufacturing, and strong knowledge of industrial torque tools and error proofing. They must be fluent in English and French, have excellent communication and negotiation skills, hold a valid driver's licence and be willing to travel.

  Industrial torque tools, Error-proofing systems, Bosch products

• 1d

  Manufacturing and Production Engineer

  Mississauga, ON

  Full Time

  SA

  Skymark Aerospace

  Candidates need a bachelor's degree in an engineering discipline and demonstrated experience developing assembly processes for physical hardware. They must read engineering drawings and tolerances, prepare work instructions, and analyse production data to verify improvements.

  CAD, ERP, MRP

• 1d

  Sales Associate

  Milton, ON

  Full Time

  CM

  CBM - Metal For Innovation

  Candidates need strong communication, customer service and sales skills, including lead generation, negotiation and closing. B2B or industrial and manufacturing sales experience is a strong asset, along with the ability to read technical drawings, CRM proficiency and post-secondary education in business, marketing, engineering or a related field.

  CRM software

• 1d

  Avionics Systems & Electrical Design Engineer

  Elora, ON

  Full Time

  I

  iAERO

  2+ YOECandidates need an engineering bachelor's degree in electrical, electronics, software or aerospace, and at least 2 years designing avionics power, communication, navigation, lighting or mission systems. They also need experience writing test plans, compliance reports and wiring diagrams, knowledge of Transport Canada or FAA rules, and strong technical writing skills.

  AutoCAD, MS Excel, MS Word, MS Outlook

• 1d

  PhD Position

  Low, QC

  Full Time

  EM

  European Microscopy Society

  Candidates need a master's degree in physics, materials science, physical chemistry or a closely related field, plus Python programming skills. Experience with TEM, EELS or cryo-EM is desirable but not required, and fluent spoken and written English is required.

  STEM, EELS, cryo-EM, Python

• 1d

  Supervisor

  Hanover, ON

  Full Time

  EC

  Electrical Contacts Limited

  3+ YOE2+ MgmtElectrical Contacts Limited needs a candidate with a high school diploma, sign-off or active training in the assigned lead area, and preferably 3 years in manufacturing and 2 years in leadership. Strong communication, coaching and problem-solving skills are needed, along with basic computer skills.

  Epicor, Nethris, Enterprise, email, electronic quality documentation

• 1d

  Assistant Operations Manager

  Toronto, ON

  Full Time

  IM

  Industrial Matrix

  3+ YOEIndustrial Matrix needs 3+ years of hands-on operations, logistics, warehouse or supply chain experience, ideally with industrial or electronics products. Candidates need ERP or inventory system skills, strong Excel, clear English, a valid Ontario G2 or higher licence and the ability to lift 20 kg.

  Zoho Inventory, Excel, ERP system, Avetta, ISNetworld

• 1d

  Electrical and Electronics Developer

  Mississauga, ON

  Full Time

  E

  Electrovaya

  8+ YOEElectrovaya needs candidates with at least 8 years of circuit design experience, ideally on battery or energy storage systems, plus strong analog and digital design skills and knowledge of battery safety standards. A bachelor's degree in electrical or electronics engineering is required, and a master's is preferred.

  OrCAD, Altium, Allegro, JIRA, Confluence

• 1d

  Test Technician

  Ottawa, ON

  Full Time

  G

  Gogo

  4+ YOECandidates need at least 4 years of hands-on experience testing and repairing electronic systems, plus an electronics technician diploma or equivalent. They must read schematics, use test instruments, follow structured quality processes and work well with teams.

  multimeter, circuit testers, thermal chambers, spectrum analyzer, power meter

• 1d

  Director, Product Development & External Manufacturing

  Vancouver, BC

  Full Time

  C

  Corinex

  10+ YOECorinex needs a candidate with an engineering or related technical degree, 10+ years in hardware or semiconductor development and manufacturing, and experience negotiating with foundries, OSAT providers and contract manufacturers. Strong supplier negotiation, commercial judgment and communication skills are also required.

• 1d

  Soldering Technician – Guelph, ON Canada

  Guelph, ON

  Full Time

  CT

  Connect Tech Inc.

  Candidates need hands-on experience with fine-tip soldering of surface-mount and through-hole circuit boards, plus good manual dexterity and strong English for reading technical instructions. IPC-A-610 and J-STD-001 training is strongly preferred, and overtime is expected when production demands it.

  soldering iron, microscope, selective soldering machine

• 1d

  Engineering Technician

  Burnaby, BC

  Full Time

  DS

  Dorigo Systems Ltd.

  Candidates need a diploma in electronics, manufacturing, mechanical, mechatronics or a related engineering technology, or equivalent experience. Hands-on mechanical and basic electrical troubleshooting, reading drawings and schematics, and working knowledge of Excel are required, with SMT/PCBA, IPC-A-610, ESD and MES knowledge as assets.

  SMT assembly equipment, screen printer, ICT test equipment, flying probe, functional test equipment, MES

• 1d

  Advanced Manufacturing Engineer

  Alberta

  Full Time

  ME

  Methode Electronics

  5+ YOECandidates need a bachelor's degree in mechanical, electrical, manufacturing or mechatronics engineering, with a master's preferred. They need at least 5 years of power products manufacturing experience and knowledge of APQP, PPAP, PFMEA, GD&T and SPC, plus strong communication and leadership skills.

  Welding equipment, Molding equipment

• 1d

  Electrical Cabinet Assembly Technician

  Ottawa, ON

  Full Time

  S

  STERIS

  1+ YOECandidates need knowledge of electronic components, electrical safety and electro-mechanical tools, plus one year of related experience and an associate's or vocational/technical credential. Soldering, schematic interpretation and strong attention to detail are preferred.

  Oscilloscope, Soldering iron, Electro-mechanical tools, Schematics and bills of materials

• 1d

  Assembler

  Ontario

  Full Time

  OE

  OSI Electronics

  Candidates need excellent hand-eye coordination, dexterity and attention to detail, plus the ability to use small hand tools and a microscope. A high school diploma is preferred, and English is required.

  Soldering iron, Microscope, Tweezers, Solder wick, Precision cutters, Dispensing equipment

• 1d

  Journeyman Electrician

  Kananaskis, AB

  Full Time

  

  Resorts of the Canadian Rockies

  2+ YOECandidates need journeyman status, 2 to 5 years of electrical maintenance experience in a resort setting, and knowledge of the Canadian Electrical Code and CSA Z-98. They also need PLC, motor and drive experience, lockout/tagout skills, comfort working at heights, and a valid Class 5 licence.

  voltmeter, ammeter, PLC, test instruments

• 1d

  Sales Coordinator

  Niagara Falls, ON

  Full Time

  DE

  Design Electronics

  2+ YOECandidates need 2 to 3 years in sales support, sales coordination or CRM administration, experience with ConnectWise or a similar CRM, and comfort on the phone every day. Strong organization, attention to detail and clear written communication are essential.

  ConnectWise, CRM, Pipeline tracker and dashboard

• 1d

  Quality Engineer

  Canada

  Full Time

  AS

  AgileGrid Solutions

  3+ YOECandidates need a bachelor's or master's degree in an engineering or technology field, three to five years of quality work, and experience with failure investigation and 8D reports. They also need hands-on electromechanical testing skills, the ability to read technical drawings, and strong written English.

  SolidWorks, oscilloscope, power analyzer, logic analyzer, multimeter, data acquisition systems

• 1d

  ELECTRONICS & WORKSHOP TECH

  Hamilton, ON

  Contract

  MU

  McMaster University

  3+ YOECandidates need a 3-year community college diploma in electronics or a related field and 3 years of relevant experience. Experience in a university setting is a strong asset, along with hands-on skill in test systems, wiring, soldering, CAD and mechanical fabrication.

  dynamometer, AVL dynamometer, A&D dynamometer, CAD software, soldering iron, power supplies

23 companies