“servo” jobs in Canada – Page 3

No matching filters. Try another name.

Results

• 12d

  PLC and Robotics Supervisor

  LaSalle, ON

  $47–$56/hrFull Time

  

  CenterLine (Windsor) Limited

  10+ YOECenterLine needs a candidate with a technical diploma, degree or trade certification in automation or a related field, plus at least 10 years of industrial automation experience and prior supervisory or project leadership. Strong knowledge of PLCs, robotics, machine safety and platforms such as Rockwell, Siemens, FANUC or ABB is expected.

  PLC, HMI, FANUC, ABB, KUKA, Yaskawa

• 14d

  Panel Assembler

  Mississauga, ON

  $20–$23/hr

  

  Arrow Speed Controls

  1+ YOEArrow Speed Controls needs candidates with electrical experience and VFD control system knowledge, including relay logic and PLC control. They must read schematics, work in English, lift up to 50 lbs, and ideally have 1 to 2 years as an electrician or panel builder.

  hand tools, schematic drawings, BOM

  14d

  Panel Assembler

  Mississauga, ON

  $20–$23/hr

  

  Arrow Speed Controls

  1+ YOEArrow Speed Controls needs candidates with electrical experience and VFD control system knowledge, including relay logic and PLC control. They must read schematics, work in English, lift up to 50 lbs, and ideally have 1 to 2 years as an electrician or panel builder.

  hand tools, schematic drawings, BOM

  16d

  Design Engineering Manager, Integrated Automation & Control Solution

  Richmond, BC

  Full Time

  

  Arrow Speed Controls

  10+ YOE3+ MgmtCandidates need a bachelor's or master's degree in power electrical engineering, automation or automation and control, a Professional Engineer (P.Eng. or PE) designation, and 10+ years of engineering experience with 3 to 5 years in management. Deep knowledge of LV/MV switchgear, VFD and PLC platforms, and industrial safety standards is required.

  Rockwell IntelliCENTER, Siemens SIMOCODE, Rockwell Allen-Bradley, Siemens, ABB, Schneider Electric

  16d

  Design Engineering Manager, Integrated Automation & Control Solution

  Richmond, BC

  Full Time

  

  Arrow Speed Controls

  10+ YOE3+ MgmtCandidates need a bachelor's or master's degree in power electrical engineering, automation or automation and control, a Professional Engineer (P.Eng. or PE) designation, and 10+ years of engineering experience with 3 to 5 years in management. Deep knowledge of LV/MV switchgear, VFD and PLC platforms, and industrial safety standards is required.

  Rockwell IntelliCENTER, Siemens SIMOCODE, Rockwell Allen-Bradley, Siemens, ABB, Schneider Electric

• 15d

  Designer, Mechanical Engineer

  Barrie, ON

  $70k–$120k/yrOn-siteFull Time

  LT

  Linear Transfer Automation

  Candidates need a bachelor's degree in engineering or equivalent experience, plus skill with CAD and FEA software. Automation experience is preferred, along with strong organization, communication and independent problem-solving abilities.

  Ansys, SolidWorks, AutoCAD

• 15d

  Mechatronics Maintenance Technician

  Morden, MB

  $73k/yrOn-siteFull Time

  CS

  CAN Solventum Canada Limited

  3+ YOECandidates need a mechanical or electrical engineering technology certificate or diploma, or a high school diploma plus three or more years of industrial mechanical or electrical experience. They must live near Morden, MB or plan to relocate before hire, and communicate clearly in English.

  PLC, servo systems, robotics, vision systems, sensors, Microsoft Word

• 15d

  Maintenance Technician- III

  Edmonton, AB

  Full Time

  

  Durabuilt Windows & Doors: Durabuilt Windows & Doors has been recognized as the #1 ENERGY STAR® certified window and door manufacturer in Canada - a distinction earned through…

  4+ YOECandidates need a diploma in mechanical or electrical technology and 4+ years as a maintenance technician, including troubleshooting and maintaining GED machines. They must read engineering drawings, use hand and power tools, and communicate clearly in English.

  CMMS, PLC, HMI, hand tools, power tools, forklift

• 16d

  Ingénieur(e) mécanique intermédiaire / Intermediate Mechanical Engineer

  Vaudreuil-Dorion, QC +1

  Full Time

  

  Calian Group Ltd.: The company went public in 1993 and became Calian Group Ltd.

  5+ YOEBaccalauréat en génie mécanique; Maîtrise d'un logiciel de CAO (SolidWorks préféré); Minimum de 5 ans d'expérience en fabrication (usinage, soudage, tôlerie)

  SolidWorks, FEA/MEF software

• 16d

  Industrial Electrician

  Brantford, ON

  

  Hilton Food Group Plc

  3+ YOECandidates need a valid Ontario Industrial Electrician (442A) or Construction & Maintenance (309A) licence and an approved apprenticeship. Strong knowledge of PLCs, industrial automation and reading electrical drawings is required, with 3 to 5 years of industrial electrical experience preferred.

  PLC, HMI, CMMS, variable frequency drive, servo drive, Siemens PLC

• 17d

  Intermediate Vision Integrator

  Waterloo, ON

  $38.83–$50.47/hrFull Time

  SA

  Samuel Automation Inc.

  5+ YOECandidates need a college diploma or university degree in an engineering or automation discipline, 5 to 7 years of industrial machine vision experience, and hands-on commissioning experience. They also need programming skills, a valid driver's licence and passport, and the ability to travel for up to three weeks.

  PLC, HMI, industrial robots, servo systems, SQL databases, Linux

• 17d

  PLC Co-Op Student - Winter 2027

  Stratford, ON

  $22–$25/hrFull Time

  P

  PM-Stratford

  Candidates need to be enrolled in a three-year advanced diploma or degree in engineering or a related field, with programming coursework. They must read electrical drawings, be comfortable with Excel and PowerPoint, and communicate well in English.

  Allen-Bradley PLC, Siemens PLC, HMI, VFD, Cognex, Keyence

• 17d

  Press Operator

  East Gwillimbury, ON

  Full Time

  

  Multimatic Dynamic Suspensions

  2+ YOECandidates need at least 2 years of press operator experience, forklift and overhead crane experience, and SPC Level 1. Programming feeder tooling parameters, wiring sensors, reading RS View screens, and troubleshooting are also required.

  Blank feeder, Overhead crane, Forklift, Gudel feeder, RS View

• 18d

  Industrial Electrician

  Port Colborne, ON

  

  IMT CORPORATION

  3+ YOECandidates need a valid Ontario Industrial Electrician (442A) Certificate of Qualification, industrial maintenance experience (3-5 years preferred), and strong troubleshooting skills with PLCs, VFDs, motors and sensors. A valid driver's licence and comfort in heavy industrial settings are required.

  PLC systems, VFD, Allen-Bradley, Siemens, HMI, infrared pyrometer

• 18d

  Control Systems Engineer

  Port Coquitlam, BC

  On-siteFull Time

  

  GeoSpectrum Technologies, Inc: specializes in underwater acoustic transducers and systems.

  5+ YOECandidates need a bachelor's degree in an engineering discipline, 5+ years of industrial, robotic, marine or autonomous vehicle control experience, and eligibility for Canadian controlled goods and government security clearances. P.Eng. eligibility is preferred.

  PLC, HMI, MATLAB/Simulink, AutoCAD Electrical, Altium Designer, Rockwell Studio 5000

  18d

  Electrical Engineer

  Dartmouth, NS

  On-siteFull Time

  

  GeoSpectrum Technologies, Inc: specializes in underwater acoustic transducers and systems.

  2+ YOEGeoSpectrum needs an engineering degree or equivalent experience, 2-5 years of professional work, and a P.Eng. licence in good standing. Candidates should know AutoCAD Electrical, SolidWorks, ABB Automation Builder, Beijer iX HMI and MATLAB, and be eligible for Controlled Goods and government security clearances.

  AutoCAD Electrical, SolidWorks, ABB Automation Builder, Beijer iX HMI, MATLAB

• 18d

  Lead Mechanical Designer

  Cambridge, ON

  $57/hrContract

  

  Insight Global: Insight Global is an international talent and consulting company that delivers business outcomes in an ever-changing world.

  5+ YOECandidates need 5+ years in automation machine design, SolidWorks proficiency, PDM experience and a post-secondary diploma or degree in mechanical design or engineering. Strong knowledge of pneumatics, actuators and servo-driven systems is required.

  SolidWorks, PDM

• 19d

  Automotive Stamping Press Mechanic

  Concord, ON

  $43–$46/hrFull Time

  

  Randstad Canada

  3+ YOECandidates need 3+ years of mechanical maintenance experience in an automotive metal stamping or heavy press shop. They should have hands-on experience tearing down and repairing presses, read hydraulic schematics and manuals, and troubleshoot breakdowns on their own.

  Torch, Lathe, Mill, Hydraulic press equipment

• 19d

  Controls Programmer

  Barrie, ON

  Full Time

  IC

  Industrial Controls Integration Ltd.

  2+ YOEIndustrial Controls Integration Ltd. asks for an electrical engineering degree or equivalent technologist experience, plus at least 2 years in the automation industry. Candidates need hands-on PLC and HMI skills, knowledge of electrical drawings and safety circuits, and a willingness to keep upgrading their skills.

  RSLogix 5000, FactoryTalk Studio, Ignition, WonderWare, SQL, Python

• 19d

  Industrial Electrician (442A / 309A) – Automotive Metal Stamping

  Markham, ON

  $38–$42/hrFull Time

  

  Kellow Recruiting

  3+ YOECandidates need a valid Ontario 442A or 309A electrician licence and ideally 3 years of industrial electrical maintenance experience. They must troubleshoot motors, drives, sensors and PLC-controlled equipment, and read electrical drawings and schematics.

  PLC, Allen-Bradley, Rockwell, diagnostic tools, stamping press, conveyors

• 19d

  Power Engineer + Millwright

  Vancouver, BC

  $49.64–$51.13/hrFull Time

  RC

  RTD Canada Inc.

  3+ YOELabatt needs a valid Millwright or Red Seal Industrial Electrician licence and at least a 5th class Power Engineering certificate, 4th class preferred. Candidates need strong troubleshooting skills, shift flexibility, and experience with hydraulics, pneumatics, electrical work and PLCs.

  lathe, vertical mill, band saw, drill press, PLC, VFD

• 21d

  Prototype Technician

  Burnaby, BC

  On-siteFull Time

  

  Svante

  2+ YOECandidates need a diploma in industrial automation, mechanical or electronic engineering technology, or equivalent experience. Hands-on electronics, test equipment, drawing reading and motion control troubleshooting are required.

  Electronic test equipment, PLC, Servo drives, SolidWorks, Creo, Microsoft Excel

• 21d

  Automation Technician

  Guelph, ON

  Full Time

  

  RLB People: Their multi-service mechanical company strives to provide its clients with the most professional maintenance and repair in Southern Ontario.

  5+ YOECandidates need a diploma in electrical, automation, mechatronics or a related technology, 5+ years of industrial automation or controls experience, and 3+ years of PLC programming. Strong troubleshooting, electrical schematic skills and willingness to travel 8 to 10 weeks a year, including overseas, are required.

  Allen Bradley PLC, HMI, VFD, Servo drives, Motoman robots, Vision systems

• 21d

  Controls Engineering Manager

  Strathroy, ON

  PI

  Parmerit Inc.

  5+ YOE5+ MgmtCandidates need a bachelor's or master's degree in electrical, mechatronics or automation engineering, at least 5 years of leadership experience in controls or automation, and advanced skills in Rockwell/Allen-Bradley PLCs, HMI/SCADA, robotics and industrial networking. Travel to customer sites is required periodically.

  CompactLogix, ControlLogix, Beckhoff TwinCAT, SCADA, HMI, EtherNet/IP

20 companies