No matching filters. Try another name.
Steelhaus Technologies
Candidates need intermediate to advanced knowledge of completions or multi-stage fracturing, plus ability to calculate differential pressures and use hand, power and air tools. Candidates also need the physical ability to lift up to 50 lbs and working knowledge of Microsoft Office.
Basic hand tools, Power tools, Air-actuated tools, Microsoft Excel, Microsoft Word, Microsoft Outlook
CEDA
Candidates need a valid Class DZ licence with no more than 5 demerits in 3 years, comfort driving manual transmissions, and the ability to pass a driver assessment and a pre-employment drug and alcohol test. Industrial fluid hauling or vacuum and high pressure experience is an asset, as is the ability to lift 50 pounds and wear respiratory equipment.
vacuum truck, high pressure truck, combo unit, specialty tools
Western Energy Services Corp.: is an oilfield service company which provides contract drilling services in Canada through its division Horizon Drilling and in the United States…
5+ YOECandidates need five years of coordinating or recruiting experience, ideally in oilfield services, plus Microsoft Office skills and knowledge of employment law. Western Energy Services Corp. also expects strong interviewing, prioritization, conflict resolution and networking skills, and the ability to work on-call.
Microsoft Office, HRIS, Applicant tracking system
University of Alberta
8+ YOECandidates need a Bachelor's degree in Electrical and Computer Engineering (Master's preferred), a P.Eng. designation, and 8+ years of experience in R&D and physical testing. Strong instrumentation, control system, sensor and leadership skills are required.
LabVIEW, DAQ systems, Strain gauges, Pressure transducers, LVDTs, Thermocouples
Dillon Consulting Limited: Dillon is a proudly Canadian, employee-owned, professional consulting firm with over 1,100 employees specializing in planning, engineering,…
Dillon Consulting Limited needs entry-level to 2 years of environmental consulting experience, ideally with fieldwork. Candidates need a valid Class G licence, a reliable vehicle, the ability to lift 40 lbs, and willingness to travel extensively and work in all weather.
Microsoft Excel, Microsoft Word, Microsoft PowerPoint, water quality meter, gas meter, drill rig
Orbia: Orbia is a company driven by a shared purpose: to advance life around the world.
Candidates need a Journeyman or Red Seal Electrician certification, a valid Class 5 driver's licence, and knowledge of electrical schematics and the Electrical Code. Industrial or maintenance experience, PLC and VFD troubleshooting, and the ability to work with minimal supervision are assets.
Multimeter, Clamp meter, Insulation resistance tester, VFD, PLC, Microsoft Word
Humanoid: First AI and robotics company in the UK, creating the world’s leading, commercially scalable, and safe humanoid robots.
1+ YOECandidates need 1–4 years of hands-on experience in robotics testing, hardware validation or mechatronics, and a related degree or diploma. Humanoid also wants knowledge of motors, sensors and motor control, comfort with lab instruments, and Python, MATLAB or LabVIEW skills.
Oscilloscopes, Multimeters, Power supplies, Force sensors, Data acquisition systems, Python
INNIO: INNIO Group is a global distributed energy solutions provider that delivers reliable, flexible, transient, decentralized, modular and efficient power.
Candidates need a technical diploma or equivalent mechanical or manufacturing experience, with engine assembly or testing experience preferred. Familiarity with MES systems, lifting equipment operation and safety protocols, and strong attention to detail are required.
MES, Morphee, Gantry lifts, Cranes, Transporters, Torque tools
INNIO: INNIO Group is a global distributed energy solutions provider that delivers reliable, flexible, transient, decentralized, modular and efficient power.
Candidates need a technical diploma or equivalent mechanical or manufacturing experience, with engine assembly or testing experience preferred. Familiarity with MES systems, lifting equipment operation and safety protocols, and strong attention to detail are required.
MES, Morphee, Gantry lifts, Cranes, Transporters, Torque tools
Total Oilfield Rentals
Total Oilfield Rentals needs candidates with a Class 5 licence and an acceptable driver's abstract, good troubleshooting skills, and mechanical aptitude. Hands-on experience with surface rental equipment and hand tools is preferred, and the candidate must pass pre-employment and ongoing pre-access testing.
wrenches, screwdrivers, impact drivers
Dominion Dynamics
Candidates need hands-on experience designing or integrating aircraft landing gear on a program that reached hardware, plus strong structural analysis, multibody dynamics and test experience. Experience writing requirements against airworthiness regulations and working directly with suppliers is also needed. Defence background is not required.
ANSYS, Abaqus, Nastran, multibody dynamics software
Dominion Dynamics
Candidates need experience designing and tuning flight control laws for aircraft that have actually flown, plus strong control theory and MATLAB/Simulink skills. They also need hands-on SIL/HIL testing experience, GNC requirements writing, and knowledge of safety analysis for flight-critical systems.
MATLAB, Simulink
Regional Municipality of Wood Buffalo
3+ YOECandidates need a Certified Journeyperson Millwright credential, high school diploma or GED, and three years of journeyperson experience in a commercial or industrial setting. A valid Class 5 licence, a criminal record check, and the ability to work outdoors in all conditions are also required.
hand tools, power tools, hoists, lifting devices
Spartan Controls Ltd.: Spartan Controls is the leading provider of industrial automation, valves, measurement and process control technology and solutions in Western Canada.
Spartan Controls needs candidates with mechanical, technical or assembly experience, which is preferred. Forklift, crane or rigging experience is an asset, and basic computer skills, lifting up to 50 lbs and the ability to pass a pre-employment alcohol and drug test are required.
hand tools, power tools, forklift, crane
Impossible Metals
Candidates need a technical diploma or equivalent hands-on experience in marine, mechanical, industrial or electrical work, plus strong mechanical aptitude and a safety-first mindset. They must be able to lift equipment, travel for multi-day offshore deployments, and obtain offshore and industrial safety certifications.
impact drivers, drills, grinders, rotary tools, saws, torque tools
Impossible Metals
5+ YOECandidates need 5+ years of hands-on shop, manufacturing, fabrication or field operations experience, plus experience with ERP and inventory systems. They also need supervisory experience, a strong health and safety background, and mechanical and electrical aptitude. A valid driver's licence is required.
Odoo, overhead crane, forklift, multimeter, oscilloscope
Fero International Inc: Fero provides sustainable and cost-effective modular solutions to address today’s infrastructure challenges.
Candidates need structural fitting and welding experience, the ability to read blueprints and use metric and imperial measurements, and crane and rigging skills. A current FCAW certificate or CWB ticket is an asset, along with attention to detail and the ability to work independently and on a team.
welding equipment, torches, drills, disc grinders, cranes, hoists
Randstad Canada
3+ YOECandidates need a valid Alberta Journeyperson Welder ticket, an active Alberta B-Pressure certification and at least three years of pipe fabrication experience. Strong SMAW, GMAW and MCAW skills are required, and candidates must be ready to pass a coupon test.
welding hood, hand tools
21 companies