“design and layout software” jobs in Canada – Page 31

No matching filters. Try another name.

Results

• 26d

  I&C and Telecom Supervisor

  Calgary, AB

  Full Time

  K

  Kent

  15+ YOEKent needs a candidate with a bachelor's degree or diploma in an engineering discipline, a P.Eng., and 15+ years of I&C experience in energy or industrial sectors. Strong leadership, planning, communication and knowledge of CSA, ISA, IEC and NEC/CEC standards are also required.

  Engineering design software, Document management systems

• 26d

  Project/Production Manager - Axine Water

  Richmond, BC

  Full Time

  

  BLANKSLATE Partners

  15+ YOECandidates need an engineering bachelor's degree (mechanical, chemical or electrical) or a related field, and at least 15 years of project and production or fabrication management, ideally in process facilities or water treatment. They should be proficient in project management software and communicate well in writing and verbally.

  MS Project, Excel, Forklift

• 26d

  Senior Municipal Engineer, Utilities

  Mississauga, ON +1

  Full Time

  G

  GFT

  10+ YOECandidates need a university degree in civil or environmental engineering or water resources, a P.Eng. registration and 10 to 15 years of wet utilities experience. They must be skilled in watermain and sewer design calculations and drafting software such as AutoCAD and Microstation.

  AutoCAD, Microstation, AutoCAD Civil 3D, Microsoft Word, Microsoft Excel

• 26d

  Hardware Design Co-op

  Cambridge, ON

  $22–$26/hr

  

  Eclipse Automation

  Candidates need to be currently enrolled in a post-secondary electrical, mechatronics or related program that requires a co-op work term. Mechanical aptitude, attention to detail, and familiarity with schematics are needed; CAD experience such as SolidWorks or AutoCAD Electrical is an asset.

  SolidWorks, AutoCAD Electrical

  27d

  Hardware Design Co-op

  Cambridge, ON

  $22–$26/hr

  

  Eclipse Automation

  Candidates need to be currently enrolled in a post-secondary electrical, mechatronics or related program that requires a co-op work term. Mechanical aptitude, attention to detail, and familiarity with schematics are needed; CAD experience such as SolidWorks or AutoCAD Electrical is an asset.

  SolidWorks, AutoCAD Electrical

• 26d

  Automation Systems Programmer - Robotics

  London, ON

  $40–$50/hrFull Time

  

  BOS Innovations

  3+ YOECandidates need at least 3 years of hands-on industrial robot programming and integration experience, ideally with FANUC robots. They must understand motion control, robot safety, PLC integration and reading mechanical and electrical drawings.

  FANUC robots, ABB robots, KUKA robots, Yaskawa Motoman, ROBOGUIDE, PLC

• 26d

  Senior Municipal Engineer, Utilities

  Toronto, ON +1

  Full Time

  

  GFT.

  10+ YOECandidates need a university degree in civil, environmental or water resources engineering, a registered P.Eng., and 10 to 15 years of wet utility design or construction experience. Proficiency with watermain and sewer design calculations and AutoCAD or Microstation is required.

  AutoCAD, Microstation, AutoCAD Civil 3D, Microsoft Word, Microsoft Excel

• 26d

  Electrical Engineer

  Calgary, AB

  On-siteFull Time

  OI

  Orbital Industries

  5+ YOECandidates need an electrical engineering degree, a P.Eng. or the ability to obtain one, and 5+ years of building system electrical design experience. Strong skills in Autodesk AutoCAD, Revit and Inventor and in SKM, plus knowledge of electrical codes and standards, are required.

  AutoCAD, Revit, Inventor, SKM

• 26d

  Mechanical Engineer / Technologist

  Toronto, ON

  On-siteFull Time

  GL

  G. L. Smith Planning & Design Inc.

  Candidates need a degree or diploma in a mechanical or related field, strong AutoCAD skills and experience with HVAC, plumbing and sprinkler design calculations. Retail or food service design experience, accreditation and comfort with evolving design technology are assets.

  AutoCAD

• 26d

  Senior Consultant, Value Creation & Analytics

  Calgary, AB

  Full Time

  

  BDO Canada LLP: BDO Canada LLP is a leading provider of professional services to clients across a variety of sectors and segments.

  1+ YOECandidates need an undergraduate degree, 1-3 years of strategy, financial planning or consulting experience, and strong PowerPoint, financial modelling and analytics skills. Familiarity with Tableau, Power BI and AI tools is expected, and willingness to travel is required.

  PowerPoint, Tableau, Power BI, ChatGPT, Notion

  26d

  Manager, Strategy, Value Creation & Analytics

  Toronto, ON

  $98k–$148k/yrFull Time

  

  BDO Canada LLP: BDO Canada LLP is a leading provider of professional services to clients across a variety of sectors and segments.

  4+ YOECandidates need an undergraduate degree, 4 to 6 years of strategy, financial analysis or consulting experience, and strong communication and PowerPoint skills. Experience with data analytics tools such as Tableau, Power BI or ChatGPT is valued.

  Tableau, Power BI, ChatGPT, Notion, PowerPoint

• 27d

  Spacecraft EMC Systems Engineer | Remote Opportunity | Fastwater Staffing

  Sainte-Anne-de-Bellevue, QC

  RemoteContract

  H

  HIKINEX: Hikinex is a company that provides scalable business support.

  10+ YOECandidates need a bachelor's degree in electrical or aerospace engineering or physics and 10+ years of electrical design experience on LEO, MEO or GEO missions. They must have spacecraft EMC expertise, experience leading EMC engineers, and English communication skills; French is an asset.

  Confluence, JIRA, PLM

• 27d

  Senior Electrical Engineer

  Vancouver, BC

  Full Time

  

  Allnorth Consultants Limited: Allnorth is a multi-disciplinary engineering, project delivery, and construction services company.

  10+ YOECandidates need a bachelor's degree in electrical engineering, 10+ years of industrial design or construction experience, and P.Eng registration or eligibility. Strong skills in AutoCAD, ETAP or EasyPower, PLC and DCS systems, and leadership are also required.

  AutoCAD, ETAP, PLC, DCS, HMI, Variable frequency drives

• 27d

  Senior Interior Designer

  Ottawa, ON +1

  $75k–$94k/yrFull Time

  

  BGIS

  7+ YOECandidates need 7+ years of interior design experience, strong AutoCAD and 3D rendering skills, and knowledge of building codes and workplace standards. An NCIDQ certification and a CIDA-accredited BAID degree are also required.

  AutoCAD, SketchUp, Bluebeam, MS Project, MS Excel, PowerPoint

• 27d

  Senior Hardware/Firmware Engineer

  Montréal, QC

  Full Time

  NI

  Noze Inc.

  7+ YOENoze needs candidates with 7+ years of electronics and embedded firmware experience, including a product taken to production. Strong low-noise analog design, STM32, MSP430 and ESP32 digital design, KiCad and PSpice skills, and a Bachelor's in Electrical or Computer Engineering (or equivalent experience) are required.

  oscilloscope, spectrum analyzer, precision DMM, SMU, LCR meter, logic analyzer

• 27d

  Electrical Engineer Co-op / Internship January 2027

  Winnipeg, MB

  Temporary

  

  Phasor Engineering Inc: Phasor Engineering Inc., a wholly owned subsidiary of Quanta Services, Inc., is a leading provider of engineering and field technical services…

  Candidates need to be current students in a Canadian university co-op program, in third or fourth year of Electrical Engineering, and eligible to work in Canada. Useful skills include power simulation software, AutoCAD and Microsoft Office.

  EasyPower, SKM, ETAP, Win-IGS, CDEGS, AutoCAD

• 27d

  Two (2) Engineer

  Toronto, ON

  $104k–$147k/yr

  

  Toronto Hydro: Toronto Hydro owns and operates an electricity distribution system that delivers electricity to approximately 793,000 customers in the city of…

  6+ YOECandidates need a Bachelor's degree in Engineering (Electrical preferred), a Professional Engineer licence in Ontario and 6+ years of engineering experience. Strong knowledge of protection, substation equipment, SEL and GE relays, and engineering analysis software is expected.

  CYME, ETAP, SKM, SEL relays, GE relays, SCADA

• 27d

  Mechanical Designer

  Mississauga, ON

  H

  Hatch

  7+ YOECandidates need heavy industrial plant layout and piping experience, knowledge of ASME piping codes, and extensive 2D and 3D CAD skills. A diploma in engineering design or drafting and 7+ years in mechanical or piping design are required.

  3D CAD software, BIM systems

• 29d

  Equipment design drafter

  Nisku, AB

  JC

  Johnson Controls

  2+ YOECandidates need a college diploma in mechanical design and drafting or a related field, plus 2 to 5 years of CAD drafting or design experience. Proficiency in Inventor and Creo, and a solid grasp of dimensioning, tolerancing and drafting standards, are required.

  Inventor, Creo, Revit, SolidWorks PDM, Vault, Windchill

  29d

  Hvac o&m controls technician

  Richmond Hill, ON

  $32–$47/hr

  JC

  Johnson Controls

  4+ YOECandidates need at least four years of commercial controls troubleshooting in HVAC, a vocational or associate's technical credential or two years of servicing experience, and strong written and verbal communication skills.

  Building automation software, Control system software, Electrical schematics tools

  29d

  Electrical engineer

  Edmonton, AB

  JC

  Johnson Controls

  2+ YOECandidates need an electrical engineering degree and P.Eng. registration with APEGA (or P.L.(Eng) in scope), 2 to 6 years of electrical design or manufacturing experience, and working knowledge of NEC/CEC and UL/CSA. Occasional travel, mostly in Edmonton, and a valid driver's licence are required.

  AutoCAD Electric, Bluebeam Revu, EPLAN, SKM, ETAP, Visual Lighting Software

• 29d

  Construction Project Manager

  North Vancouver, BC

  Full Time, Contract

  

  Express Employment Professionals: The Express franchise brand is an industry-leading, international staffing company with franchise locations across the U.S., Canada, South Africa,…

  3+ YOE2+ MgmtExpress Employment Professionals needs candidates with a bachelor's degree in mechanical engineering or a related field, 3-5 years of commercial HVAC experience and 2 years of construction project management. Candidates must know HVAC selection software and Microsoft Office, and have a valid driver's licence and reliable transportation.

  Daikin Tools, Daikin City, Magellano, WeDoGeo, S4, NimbusCool

  29d

  Project Development Manager

  Toronto, ON

  $115k/yrFull Time, Contract

  

  Express Employment Professionals: The Express franchise brand is an industry-leading, international staffing company with franchise locations across the U.S., Canada, South Africa,…

  7+ YOEPlatform 1 Inc. needs a P.Eng. with a civil or structural engineering degree and at least 7 years of engineering, estimating or industrial construction experience. Candidates need assertive job-site leadership and proficiency with RSTAB, RFEM, Tekla, AutoCAD and BIM software.

  RSTAB, RFEM, Tekla, AutoCAD, BIM software

• 29d

  Showroom Sales Consultant - Kitchen & Bath

  Toronto, ON

  $25–$30/hr

  T

  TalentSphere

  3+ YOECandidates need 3+ years of kitchen and bath sales experience, proven plumbing and fixture sales, working knowledge of 2020 design software, and a track record of meeting sales goals. Reliable transportation and willingness to work in the GTA are also required.

  2020 design software

19 companies