“Schematics and technical documentation” jobs in Canada – Page 33

No matching filters. Try another name.

Results

• 26d

  Maintenance Supervisor

  Dartmouth, NS

  

  GFL Environmental: GFL Environmental is the only major diversified environmental services company in North America offering services in solid waste management, liquid…

  Candidates need a Red Seal or Journeyman Heavy Duty Mechanic certification, proven heavy equipment or medium/heavy truck fleet experience, and a clean driver's licence. Supervisory experience is highly preferred, along with strong diagnostic and communication skills.

  Electronic diagnostic scan tools, Laptop diagnostic software, Fleet maintenance software, DVIR, M5 work orders

  26d

  421A Heavy Duty Mechanic

  Sault Ste. Marie, ON

  

  GFL Environmental: GFL Environmental is the only major diversified environmental services company in North America offering services in solid waste management, liquid…

  2+ YOECandidates need a 421A Heavy Duty Equipment Technician Certification, at least 2 years of heavy equipment repair experience, and knowledge of fuel, electrical, hydraulic and air brake systems. They must be able to read hydraulic schematics, diagnose with vehicle computer systems, and meet safety-sensitive job standards.

  Vehicle computer diagnostic systems, Fleet maintenance software, Diagnostic tools

  26d

  Heavy Duty Mechanic

  Charlottetown, PE

  $32–$42/hr

  

  GFL Environmental: GFL Environmental is the only major diversified environmental services company in North America offering services in solid waste management, liquid…

  1+ YOECandidates need a licensed Heavy Duty Mechanic (Red Seal) or a registered apprentice, at least 1 year of hands-on diesel experience, and the ability to read technical manuals. They must also own a full set of heavy-duty tools and meet safety-sensitive role criteria.

  M5 planner, diagnostic tools, hand tools

• 26d

  Senior Electrical Engineer

  Toronto, ON

  $100k–$140k/yrHybridFull Time

  

  Flosonics Medical: Flosonics Medical is a venture-backed start-up that develops and commercializes wearable sensors, which improve clinical management of critically…

  10+ YOECandidates need a Bachelor's or Master's in electrical engineering, 10+ years of hardware design and validation experience, and proven work on analog circuits, ultrasound or RF transducers and low-power battery devices. Hands-on skill with Altium Designer and lab instruments, plus experience under design controls and ISO 13485, is required.

  Altium Designer, oscilloscope, spectrum analyzer, vector network analyzer

• 26d

  Electrician

  Hamilton, ON

  AM

  Avl manufacturing

  5+ YOECandidates need an interprovincial Red Seal Industrial Electrician certification (309A or 442A) and at least 5 years of industrial experience. Basic PLC programming, control panel knowledge and the ability to travel within North America with a valid passport and driver's licence are also needed.

  PLC, Conduit, Switchgear, Electrical drawings

• 26d

  Specialist Instrumentation, Control & Electrical Engineer

  Mississauga, ON

  Full Time

  CE

  Candu Energy Inc.

  Candidates need a bachelor's degree in an electrical, controls or related engineering discipline and extensive progressive experience in automation. Advanced skills in Siemens PLCs, WinCC, LabVIEW and industrial networks are required, and a nuclear security clearance must be obtainable.

  Siemens PLC, TIA Portal, Step 7, WinCC, LabVIEW, National Instruments hardware

  26d

  Electrical Technician/Technologist – Working Level

  Mississauga, ON

  Full Time

  CE

  Candu Energy Inc.

  5+ YOECandidates need a diploma in electrical engineering technology, instrumentation and controls, or electromechanical technology, plus five to eight years of industrial electrical or automation experience. Hands-on panel wiring, electrical testing and troubleshooting skills are required, while Siemens PLC, LabVIEW and forklift or crane experience are assets.

  Siemens PLC, TIA Portal, Step 7, WinCC, LabVIEW, multimeter

  26d

  TML2 Electrical, I&C Technician/Technologist - Development Level

  Mississauga, ON

  Full Time

  CE

  Candu Energy Inc.

  2+ YOECandidates need a diploma in electrical, electronics or instrumentation technology and two to five years of hands-on electrical and controls experience. They also need PLC and schematic reading skills, the ability to qualify as a Nuclear Energy Worker, and the ability to obtain a security clearance.

  Multimeter, Megger, Ammeter, LabVIEW, Siemens PLC, Step 7

• 26d

  Golf, Turf & Agricultural Technician

  Upper Onslow, NS

  On-siteFull Time

  GD

  Green Diamond Equipment

  1+ YOECandidates need at least one year of service repair experience, knowledge of mechanical, electrical and hydraulic systems, and a valid driver's license. They should be able to lift 75 lbs repeatedly and use Service Advisor and basic computer functions.

  John Deere equipment, Service Advisor, forklift, diagnostic equipment

• 26d

  Project Manager

  Aurora, ON

  $80k–$135k/yrRemoteFull Time

  

  Matheson Constructors

  5+ YOECandidates need a post-secondary diploma or degree in engineering, construction management or a related field, plus at least five years of progressive commercial construction project management. They must read blueprints, know construction methods and sequencing, and hold a valid driver's licence.

  Microsoft Word, Microsoft Excel, Microsoft Outlook, Microsoft PowerPoint

• 26d

  Senior Architectural Technologist

  Dartmouth, NS +1

  On-siteFull Time

  

  Stantec

  5+ YOECandidates need a technical diploma in building or architectural technology (or equivalent experience), 5+ years in the industry, and working knowledge of Revit and AutoCAD. Strong drafting, space planning and building code skills are expected.

  Revit, AutoCAD, SketchUp, Adobe Creative Suite, Microsoft Office

• 26d

  Estimator / Project Manager

  Newmarket, ON

  Full Time

  SR

  ServiceMaster Restore of Aurora, Newmarket, Richmond Hill

  3+ YOECandidates need at least three years of insurance restoration or construction estimating/project management experience, plus the ability to read blueprints and understand construction trades. Strong planning, negotiation, communication and Xactimate skills are needed.

  Xactimate, Xactanalysis, Microsoft Excel, Microsoft Word

• 27d

  Heavy Duty Mechanic

  Prince George, BC

  $50.75–$53.55/hrOn-site

  I

  IREN

  Candidates need a Journeyperson Heavy Duty Equipment Technician certification and experience with heavy mobile or power generation equipment, ideally diesel generators. A valid Class 5 driver's licence and a passing criminal record check are also required.

  diesel generator, pumps, SCADA

  27d

  Heavy Duty Mechanic

  Mackenzie, BC

  $50.75–$53.55/hrOn-site

  I

  IREN

  Candidates need a Journeyperson Heavy Duty Equipment Technician certification, a valid Class 5 licence and experience with heavy diesel or industrial equipment. Knowledge of WorkSafeBC regulations and the ability to pass a criminal record check are also required.

  diesel generator, SCADA

  27d

  Mechanical Supervisor (Mackenzie)

  Mackenzie, BC

  $50–$57/hrOn-site

  I

  IREN

  5+ YOE1+ MgmtCandidates need a Red Seal Heavy Duty Mechanic credential or equivalent experience maintaining large diesel generators and HVAC units, plus 5+ years of mechanical or HVAC work and 1 to 3 years of supervisory experience. Strong HVAC knowledge, the ability to read mechanical drawings and CMMS experience are expected.

  CMMS, Diesel stand-by generators

• 27d

  Estimator / Project Manager

  Tecumseh, ON

  Full Time

  SR

  ServiceMaster Restore of Windsor

  3+ YOECandidates need at least three years of insurance restoration or construction estimating/project management experience, plus the ability to read blueprints and understand construction trades. Strong negotiation, communication and organization skills and working knowledge of Xactimate and Microsoft Office are essential.

  Xactimate, Xactanalysis, Microsoft Excel, Microsoft Word, Office equipment

• 27d

  Principal Engineer - Protection & Control

  Vancouver, BC

  Full Time

  

  Qualus: Qualus is a leading pure-play power services firm and innovator at the forefront of the energy transition and transformation, with differentiated…

  15+ YOECandidates need 15 to 20+ years of utility protection, control and metering experience, a Bachelor's in Electrical Engineering, and a P.Eng. or eligibility for one. Hands-on use of ASPEN, CAPE, EasyPower, SKM and SEL/GE relays, plus strong communication skills, are required.

  ASPEN, CAPE, EasyPower, SKM

  27d

  Principal SCADA Engineer

  Vancouver, BC

  Full Time

  

  Qualus: Qualus is a leading pure-play power services firm and innovator at the forefront of the energy transition and transformation, with differentiated…

  20+ YOECandidates need 20+ years of utility protection, control and metering experience, a Bachelor's in Electrical Engineering, and a Canadian P.Eng. or eligibility to obtain one. Strong skills with SCADA, RTUs, PLCs, DNP3, Modbus and IEC 61850, plus protection coordination and NERC compliance knowledge, are required.

  SCADA Master, EMS, DMS, RTU, PLC, HMI

  27d

  Senior SCADA Engineer - Substations

  Vancouver, BC

  Full Time

  

  Qualus: Qualus is a leading pure-play power services firm and innovator at the forefront of the energy transition and transformation, with differentiated…

  8+ YOEQualus needs a senior engineer with 8 to 15 years of utility automation, protection and control experience and a Bachelor's in Electrical Engineering. Candidates need P.Eng. registration or eligibility and hands-on knowledge of SCADA, RTUs, PLCs and utility communication protocols.

  SCADA, RTU, PLC, HMI, telemetry systems, DNP3

  27d

  Senior Engineer - Mechanical

  Vancouver, BC

  Full Time

  

  Qualus: Qualus is a leading pure-play power services firm and innovator at the forefront of the energy transition and transformation, with differentiated…

  8+ YOECandidates need a mechanical engineering degree with a Canadian P.Eng. or the ability to register with EGBC, plus 8-10+ years of HVAC-related mechanical experience. Strong knowledge of codes and standards such as NBC-AB, NECB, ASHRAE, NFPA and SMACNA, and excellent communication skills, are required.

  Design drawings, HVAC, Plumbing, Documentation, Coaching, Mechanical engineering

  27d

  Lead Substation Protection & Control Engineer

  Vancouver, BC

  Full Time

  

  Qualus: Qualus is a leading pure-play power services firm and innovator at the forefront of the energy transition and transformation, with differentiated…

  10+ YOECandidates need 10 to 15 years of utility protection, control and metering experience, a Bachelor's in Electrical Engineering and a P.Eng. or eligibility to obtain one in Canada. They must have hands-on experience with protection software and SEL or GE relays and strong communication skills.

  ASPEN, CAPE, EasyPower, SKM

  27d

  Lead Substation Protection & Control Engineer

  Calgary, AB +1

  RemoteFull Time

  

  Qualus: Qualus is a leading pure-play power services firm and innovator at the forefront of the energy transition and transformation, with differentiated…

  10+ YOECandidates need 10 to 15 years of utility protection, control and metering experience, a Bachelor's in Electrical Engineering and a P.Eng. or eligibility to obtain one in Canada. They must have hands-on experience with protection software and SEL or GE relays and strong communication skills.

  ASPEN, CAPE, EasyPower, SKM

  27d

  Power Systems Specialist III

  Bolton, ON

  Full Time

  

  Qualus: Qualus is a leading pure-play power services firm and innovator at the forefront of the energy transition and transformation, with differentiated…

  3+ YOEQualus asks for an electrical engineering degree or technologist certification and 3+ years of power systems experience. Candidates need study software skills in SKM, ETAP or Easy Power, knowledge of electrical codes, and willingness to travel 30% of the time.

  AutoCAD, Bluebeam, SKM, ETAP, Easy Power, Microsoft Office

• 27d

  Electrical Engineering Intern

  Ontario

  $26–$27/hr

  

  Primero: Primero is a leading multidisciplinary engineering, procurement, and construction company specialising in delivering comprehensive, fully integrated…

  Candidates need to be in the 3rd or 4th year of an electrical engineering bachelor's degree, with an understanding of electrical drawings and power distribution. Microsoft Office is required, AutoCAD or EPLAN is an asset, and they must have legal authorization to work in Canada.

  AutoCAD, EPLAN, Microsoft Office

12 companies