“Structural Repair Manuals” jobs in Canada – Page 9

No matching filters. Try another name.

Results

• 26d

  Millwright Technician

  Mississauga, ON

  

  eCycle solutions Inc.: eCycle Solutions operates multiple asset recovery and electronics and electrical equipment recycling facilities across Canada – amongst the most…

  Candidates need experience with conveyors and fabrication-heavy industrial settings, strong machining skills, and the ability to work independently on night shifts. A 433A Red Seal and a CWB welding certification are preferred.

  Lathe, Milling machine, Grinders, Oxy-fuel cutting equipment, Micrometers, Calipers

• 26d

  Lead Mechanic

  Grande Prairie, AB

  PG

  Plum Gas Solutions: Plum Gas Solutions is a leading North American provider of natural gas pressure regulation equipment and virtual pipeline services.

  10+ YOECandidates need ten or more years of industrial or heavy-equipment mechanical experience, with strong troubleshooting and knowledge of hydraulics, pneumatics and basic electrical systems. Plum Energy Solutions also requires leadership, planning and communication skills, a valid driver's licence with a clean record, and comfort with computer-based maintenance records.

  CMMS

• 26d

  Aircraft Maintenance Engineer

  Manitoba

  

  Custom Helicopters Ltd.

  Candidates need a valid Transport Canada Aircraft Maintenance Engineer licence with an M1 or M2 rating. Experience on AS350, B407, B205, AS332-L2 or SK76 helicopters is preferred, along with the ability to work under pressure, travel on short notice and lift over 50 lbs.

  WinAir

• 26d

  Aircraft Maintenance Engineer (AME) Apprentice – M1

  London, ON

  DA

  Diamond Aircraft Canada

  Diamond Aircraft needs candidates with a TCCA-approved AME M1 Basic Training course and a valid TC approval number. Candidates should have mechanical aptitude, the ability to read blueprints and schematics, close-tolerance and measuring skills, and knowledge of Canadian and FAA aviation regulations.

  Smarteam, Navision, Excel, Word, hand tools, measuring devices

• 26d

  Webber - Road Maintenance Technician - Infrastructure Management

  Homer, ON

  $25.50–$26.50/hrFull Time

  TW

  TI2 WEBBER INFRASTRUCTURE MANAGEMENT CANADA

  1+ YOEWebber needs a high school diploma or GED and a valid G driver's licence with a good driving record. One year of infrastructure or maintenance experience is preferred, and CDL, DOT/MTO, electrical or welding certifications are a strong asset.

  bucket truck, aerial lift, scaffolding, pickup truck, large truck, snow removal equipment

• 26d

  Data Analyst - (Revenue Operations)

  Toronto, ON

  RemoteFull Time

  

  Skimmer

  Candidates need prior experience in revenue operations, business intelligence, or data analytics, with strong SQL and experience querying a cloud data warehouse like Snowflake. They also need CRM experience with HubSpot or Salesforce, a BI tool such as Looker or Tableau, and comfort using AI tools for analysis.

  SQL, Snowflake, dbt, HubSpot, Salesforce, Sigma

• 26d

  Rentals Head Technician - Winter 2026/27

  Banff, AB

  Temporary

  

  Sunshine Village Corporation

  Sunshine Village Corporation needs an experienced ski and board tuner with advanced repair and binding adjustment skills, strong leadership and communication in English, and a passion for customer service. Computer skills with Microsoft Office and rental software are an asset.

  Wintersteiger tuning machine, Wintersteiger waxing machine, Microsoft Office, Sports rental software

• 26d

  Industrial Mechanic

  Vaughan, ON +1

  $77k/yr

  CM

  Combined Metal Industries

  3+ YOECandidates need at least 3 years of industrial maintenance experience in manufacturing, recycling, aggregates or heavy industry, with secondary school completion, welding certification, a valid G licence and their own trade tools. Strong mechanical, hydraulic and pneumatic troubleshooting and blueprint reading are essential.

  welding equipment, hoisting and lifting devices, hydraulic diagrams tools, blueprints

  26d

  Industrial Millwright

  Vaughan, ON +1

  CM

  Combined Metal Industries

  5+ YOECandidates need Red Seal Industrial Millwright (433A) certification, at least 5 years of industrial maintenance experience, and strong mechanical, hydraulic and pneumatic troubleshooting skills. Welding experience, a valid G driver's licence, personal trade tools, and willingness to work flexible shifts and across sites within 11 km are also required.

  welding equipment, hydraulic diagrams, blueprints, equipment manuals

• 26d

  Structure Shop - Technician

  Winnipeg, MB

  

  Perimeter Aviation: Acquired by Exchange Income Corporation in 2004, Perimeter Aviation operates from bases in Winnipeg (headquarters) and Thompson, MB, as well as…

  5+ YOEPerimeter Aviation needs candidates with grade 12 or equivalent and preferably 5 years of structural experience on pressurized aircraft. They must be able to read engineering drawings and ideally hold a Transport Canada S-License or equivalent approved training.

  Engineering drawings, Aircraft manuals, Tooling

  26d

  Structure Shop - Technician

  Winnipeg, MB

  

  Perimeter Aviation: Acquired by Exchange Income Corporation in 2004, Perimeter Aviation operates from bases in Winnipeg (headquarters) and Thompson, MB, as well as…

  5+ YOEPerimeter Aviation needs candidates with grade 12 or equivalent and preferably 5 years of structural experience on pressurized aircraft. They must be able to read engineering drawings and ideally hold a Transport Canada S-License or equivalent approved training.

  Engineering drawings, Aircraft manuals, Tooling

• 27d

  Apprentice Welder

  Saskatoon, SK

  $23.60/hrFull Time

  

  Loraas

  1+ YOECandidates need to be a 1st or 2nd year welding apprentice with 1-2 years of heavy-duty welding experience. They should know TIG and MMA welding and be able to use saws, squares and calipers. They must pass all pre-employment tests, and a commercial driving licence is an asset.

  welding equipment, saws, squares, calipers

• 27d

  Aircraft Maintenance Engineer / Inspector

  Ontario

  Full Time

  LE

  Leading Edge

  2+ YOECandidates need a valid Transport Canada AME licence for the relevant aircraft category and preferably 2 to 5 years of aircraft maintenance experience. Strong knowledge of manuals, troubleshooting skills and a commitment to safety are also needed.

  Inspection, Troubleshoot, Documentation, Regulatory compliance, Troubleshooting, Attention to detail

• 27d

  Sonic Driller

  Alberta

  

  Big Country Drilling

  2+ YOECandidates need about 2 years of experience as a driller in oil and gas, ideally in core hole drilling, plus a valid driver's licence with a clean abstract. Strong safety knowledge, mechanical and troubleshooting skills, and leadership and mentoring ability are also required.

  rotary drill, mud pump, hoisting equipment, drilling rig

  27d

  Driller

  Alberta

  

  Big Country Drilling

  Big Country Drilling needs candidates with oil and gas drilling experience, preferably core hole drilling, who know drilling equipment and safety procedures. Valid oil field tickets, including First Line Blow out prevention, and a clean driver's licence are required, with training offered for the tickets.

  rotary drill, mud pump, hoisting equipment, drilling rig

• 27d

  Mri technologist-new grads

  Vancouver, BC

  $43.32–$54.04/hr

  

  Fraser Health Authority

  1+ YOECandidates need CAMRT certification in Magnetic Resonance Imaging and current BCLS CPR certification. An IV therapy course may be required, and one year of recent related experience or an equivalent combination is asked for.

  PACS, radiology information system, hospital information system

• 27d

  AME S apprentice

  Richmond, BC

  H

  Heli-One: Heli-One is the world’s largest helicopter support company, specializing in maintenance, repair and overhaul.

  Candidates need a Transport Canada approved training program certificate (e.g. BCIT, SAIT), a Human Factors certificate and a logbook. Occasional domestic and international travel is an asset.

  Jigs and fixtures, Measuring instruments, Precision test equipment, Hand tools, Power tools

  27d

  Machinist - Tech 2

  Richmond, BC

  H

  Heli-One: Heli-One is the world’s largest helicopter support company, specializing in maintenance, repair and overhaul.

  5+ YOECandidates need a completed Red Seal in Machining or equivalent and at least 5 years of machine shop experience. Knowledge of aerospace component repair and the ability to read manuals, drawings and blueprints are assets.

  CNC machines, Blueprints, Technical manuals

  27d

  Aerospace Welder - Tech 2

  Richmond, BC

  H

  Heli-One: Heli-One is the world’s largest helicopter support company, specializing in maintenance, repair and overhaul.

  10+ YOECandidates need AWS D17.1 and D17.2 knowledge, hands-on GTAW (TIG) and resistance or micro spot welding experience, and the ability to read complex drawings. A welding fundamentals program (Level B and C) or 10+ years of GTAW experience is required, along with 20/20 corrected vision and English communication skills.

  TIG welder, Spot welder, Welding equipment, Hand tools

• 27d

  IT Technician

  Nunavut

  

  Baffinland Iron Mines: Canadian mining company of the highest grade of direct shipped iron ore in the world. Mary River site, Baffin Island, NU

  Candidates need strong customer service and communication skills, experience writing business documents such as reports and procedures, and good analytical and problem-solving abilities. Candidates must also be legally entitled to work in Canada.

  workstations, printers, phone and voicemail systems, man lift, skid steer, boom truck

  27d

  IT Technician

  Nunavut

  

  Baffinland Iron Mines: Canadian mining company of the highest grade of direct shipped iron ore in the world. Mary River site, Baffin Island, NU

  Candidates need strong customer service and communication skills, experience writing business documents such as reports and procedures, and good analytical and problem-solving abilities. Candidates must also be legally entitled to work in Canada.

  workstations, printers, phone and voicemail systems, man lift, skid steer, boom truck

  27d

  Heavy Duty Technician

  Nunavut

  

  Baffinland Iron Mines: Canadian mining company of the highest grade of direct shipped iron ore in the world. Mary River site, Baffin Island, NU

  5+ YOECandidates need heavy equipment technician certification, 5+ years of field maintenance experience in open-pit mining, and welding and fabrication experience. Strong troubleshooting skills, safe work practices and the ability to work alone in remote Arctic conditions are required.

  SAP, forklift, crane, skid steer, lube truck

• 27d

  Journalier - ouvrier polyvalent / general laborer – multi-skilled worker

  Saint-Bruno-de-Montarville, QC

  Full Time

  GD

  Groupe DCM: DCM Group operates through six centers of excellence:

  1+ YOEDES complété; 1 à 2 ans d'expérience en travail manuel; Capacité à lire et interpréter les dessins techniques

  chariot élévateur, machine à graver

• 27d

  Building Consultant - Principal

  Quebec

  Full Time

  EG

  EFI Global Canada

  10+ YOEEFI Global Canada needs candidates with ten years of relevant experience, eight of them in insurance restoration, plus IICRC Master, WRT, ASD and Smoke & Soot certifications. Candidates also need strong communication, negotiation and report-writing skills and a valid driver's licence.

  Microsoft Office

17 companies