“5-axis CNC mill” jobs in Canada

No matching filters. Try another name.

Results

• 8d

  Advanced 5-axis CNC Mill Machinist

  Oakville, ON

  $48–$58/hrFull Time

  

  Randstad Canada

  Randstad Canada needs a senior CNC machinist with proven experience in high-mix, low-volume work, advanced 5-axis milling on Fanuc controls, blueprint reading, and machining titanium, Inconel and stainless steel.

  5-axis CNC mill, Matsuura, Nakama, GF, Fanuc control

  23h

  CNC Machinist - Afternoon Shift

  Brantford, ON

  $30–$38/hrFull Time

  

  Randstad Canada

  10+ YOECandidates need a 429A General Machinist certificate or Red Seal, a registered third-year apprenticeship, or 10+ years of custom machining experience. Hands-on HAAS setup and operation experience, blueprint reading, and holding tolerances to 0.0001" are required.

  HAAS VF-6, HAAS VMC, HAAS CNC lathe, Horizontal boring mill

  8d

  CNC Machinist

  Uxbridge, ON

  $35–$42/hrFull Time

  

  Randstad Canada

  Candidates need proven experience running multi-axis lathes or 4-axis and 5-axis machining centers, working with Fanuc and Heidenhain controls, and reading blueprints. Reliable daily transportation to Uxbridge is required.

  Fanuc control, Heidenhain control, 4-axis VMC, 5-axis VMC, 9-axis lathe

  24d

  CNC Machinist

  Uxbridge, ON

  $30–$37/hrFull Time

  

  Randstad Canada

  Candidates need proven CNC machining experience on multi-axis lathes or 4-axis and 5-axis machining centers, plus experience with Fanuc or Heidenhain controls. Strong blueprint reading and G- and M-code skills are required, and reliable personal transportation to the Uxbridge site is needed.

  Fanuc, Heidenhain, 4-axis VMC, 5-axis VMC, 9-axis lathe

• 19h

  Lead CNC Programmer

  Edmonton, AB

  $45–$52/hr

  

  Agilus Work Solutions: Experts in Specialized Talent for Nearly 50 years. Canada's largest, full service, privately-owned recruiting firm.

  5+ YOECandidates need 5+ years of Mastercam experience, including multi-axis programming, and 5+ years of SolidWorks experience for CNC programming. Strong CNC milling knowledge and tight-tolerance manufacturing experience are required, and candidates must pass an onsite Mastercam and SolidWorks practical assessment.

  Mastercam, SolidWorks

• 3d

  Pilot Plant Machinist

  Windsor, ON

  GC

  Gates Corporation

  7+ YOECandidates need an Ontario machining or tool and die apprenticeship, or equivalent CNC experience, with 7 to 10 years of CNC work including 5-axis milling. Strong skills in CAM programming, GD&T, probing, and Fanuc, HAAS or Matsuura controls are required.

  Mastercam, 5-axis CNC mill, HAAS, Fanuc, Matsuura

• 4d

  CNC Operator -Afternoon Shift

  Mississauga, ON

  $20–$24/hrOn-siteFull Time

  FG

  Flynn Group of Companies

  Candidates need to read shop drawings and blueprints and measure to 1/16 inch or 1 mm. Experience with CNC equipment and programming basic equipment is an asset, along with mechanical aptitude and attention to detail.

  CNC milling machine, 4-axis CNC mill, 5-axis CNC mill, tape measure, saw, punch press

• 4d

  Programmeur de commande numérique - pièces expérimentales / Manufacturing Engineering Specialist – experimental parts

  Longueuil, QC

  Full Time

  

  RTX

  15+ YOEDiplôme d'études collégiales en fabrication ou conception mécanique; 15 à 20 ans de programmation CN multiaxes; Maîtrise de CATIA V5 et de la suite Microsoft Office et MS Project

  CATIA V5, Vericut, MS Project, Microsoft Office, SAP, PLM

• 8d

  Machining - Custom Machinist

  Woodstock, ON

  TI

  Tigercat Industries

  Candidates need a machinist licence and hands-on experience with Heidenhain, Mastercam and Fanuc control systems. They also need SolidWorks skills and comfort using micrometers and calipers.

  Mastercam, SolidWorks, CNC mills, CNC lathes, 5-axis machines, micrometers

  17d

  Custom Machinist

  Brant, ON

  TI

  Tigercat Industries

  Candidates need a machinist licence and hands-on experience with Heidenhain, Fanuc and Mastercam control systems, plus SolidWorks. They must be skilled with micrometers and calipers and comfortable with physical work.

  Mastercam, SolidWorks, CNC mills, CNC lathes, 5-axis machines, cranes

  17d

  Custom Machinist

  Cambridge, ON

  TI

  Tigercat Industries

  Candidates need a Licensed Machinist credential and experience programming CNC equipment with Heidenhain, Mastercam and Fanuc controls. They also need SolidWorks skills and proficiency with precision measuring tools.

  SolidWorks, Mastercam, Heidenhain, Fanuc, CNC mill, CNC lathe

• 9d

  CNC Programmer

  Nisku, AB

  On-siteFull Time

  CI

  CNC Industries

  5+ YOECandidates need 5+ years of CNC machine setup and operation, 2+ years with ESPRIT or a similar CAM package, and strong mill-turn and 5-axis experience. Knowledge of API and oilfield threading, tooling, feeds and speeds, and basic Lean or Six Sigma is preferred.

  ESPRIT EDGE, FANUC control, HEIDENHAIN control, MAZATROL control, mill-turn machine, 5-axis milling machine

• 16d

  CNC Machinist

  Oakville, ON

  $29–$38.50/hr

  

  BWXT

  5+ YOEBWXT needs machinists with 5+ years running 4- and 5-axis CNC mills and multi-axis lathes, able to read engineering drawings with GD&T and metrology knowledge. A Certificate of Qualification is an asset, and aerospace, defence or nuclear experience is a definite asset.

  CNC mill, CNC lathe, bandsaw, manual mill, manual drill press, micrometers

• 17d

  Custom Machinist

  Cambridge, ON

  MS

  MacDonald Steel

  Candidates need a licensed machinist background with Heidenhain, Mastercam and Fanuc control experience, plus SolidWorks skills and proficiency with precision measuring tools. Strength for lifting and moving parts and the ability to troubleshoot equipment are also needed.

  SolidWorks, Mastercam, CNC mill, CNC lathe, 5-axis machine, horizontal boring mill

• 21d

  CNC - Specialty Machinist

  St. Catharines, ON

  $25–$32/hrFull Time, Contract

  

  Express Employment Professionals: The Express franchise brand is an industry-leading, international staffing company with franchise locations across the U.S., Canada, South Africa,…

  3+ YOECandidates need 3 to 5 years of machining experience and attention to detail. Experience with 5-axis milling, turning, DMG Mills and CMM operation is an asset.

  CNC milling machine, CNC turning machine, 5-axis machine, DMG Mills, CMM

  21d

  CNC Programmer

  St. Catharines, ON

  $40–$50/hrFull Time, Contract

  

  Express Employment Professionals: The Express franchise brand is an industry-leading, international staffing company with franchise locations across the U.S., Canada, South Africa,…

  5+ YOECandidates need 5+ years of 5-axis CNC programming and 5+ years of hands-on CNC setup and operation. Strong GD&T and drawing skills, experience with tough alloys, and proven problem-solving are required.

  PowerMill, DMG MORI machining centre, Heidenhain control

  21d

  Technical Sales Representative (CNC Manufacturing)

  St. Catharines, ON

  Full Time, Contract

  

  Express Employment Professionals: The Express franchise brand is an industry-leading, international staffing company with franchise locations across the U.S., Canada, South Africa,…

  Candidates need proven technical sales or business development experience and an understanding of CNC machining, precision manufacturing, or metalworking. They must read engineering drawings, communicate and negotiate well, work independently, and hold a valid driver's licence to travel to customer sites.

  Sales, CNC, Estimating, Cold calling, Relationship building, Procurement

• 21d

  Machinist - 5 & 6 Axis

  St. Thomas, ON

  $38.95–$45.10/hrFull Time

  

  Arrow: Arrow Machine and Fabrication Group is an engineering-focused solution provider of machined castings, fabrications, and assemblies.

  2+ YOECandidates need a high school diploma and 2 to 3 years of experience setting up and operating 5-axis CNC machines. They must read blueprints and CNC programs, and understand machine calibration, tool selection and complex datum structures.

  5-axis CNC machine, CNC program, precision measuring instruments

  23d

  Machinist- Tool Room

  Guelph, ON

  $27.41–$35.69/hrFull Time

  

  Arrow: Arrow Machine and Fabrication Group is an engineering-focused solution provider of machined castings, fabrications, and assemblies.

  2+ YOECandidates need a machinist or tool and die maker licence and 2 to 5 years of custom machining experience. They must read blueprints well, operate and program 3 and 5 axis CNC machines, and know G-code and M-code.

  CNC machines, Lathe, Micrometer, Vernier, Calliper, Height gauge

• 22d

  CNC Programmer

  Concord, ON

  $20–$40/hr

  TW

  The Wohl Group - Recruitment Made Easy!

  10+ YOECandidates need 10 years of precision machining experience, expert Mastercam and 5-axis milling and lathe programming skills, and intermediate CAD and fixture design ability. An engineering technologist background in numerical control and GD&T knowledge are also required.

  Mastercam, Vericut, SolidEdge, SolidWorks, AutoCAD, MS Excel

• 22d

  CNC Operator

  Dundas, ON

  $23.50–$30/hrFull Time

  L

  Liburdi

  1+ YOECandidates need at least one year of CNC machinist experience on 3 or 5 axis machines and must read engineering drawings and use precision measuring tools. Proficiency in Microsoft Word, Outlook and Excel is required, and EDM experience, a machinist certificate and 5S knowledge are assets.

  CNC milling machines, CNC grinding machines, EDM machines, Micrometer, Vernier caliper, Height gauge

• 23d

  CNC Operator

  Abbotsford, BC

  $26–$36/hrFull Time

  RT

  RAD Torque Systems: RAD Torque Systems (New World Technologies Inc.) is the leading Canadian manufacturer of high-performance torque tools, including pneumatic,…

  2+ YOECandidates need 2+ years of CNC operating experience in metal or tool fabrication and 6 months to 1 year proving programs on 4 and 5 axis machines. Shift work on rotating schedules is required, and Okuma and HAAS experience is an asset.

  CNC lathe, CNC mill, Okuma, HAAS

• 23d

  CNC Machining Process Specialist

  Sydney, NS

  On-siteFull Time

  

  Protocase Inc./45Drives Ltd.: Leading Manufacturer of Custom Electronic Enclosures & Parts for Science, Engineering and Innovation

  3+ YOECandidates need at least 3 years of CNC machining experience, a machining or manufacturing technology diploma or equivalent hands-on experience, and working knowledge of G-code and CAM software. Strong problem-solving skills, 5-axis milling experience and clear communication are also needed.

  CNC mill, 5-axis mill, CNC lathe, Coordinate Measuring Machine (CMM), CAM software

• 24d

  Senior CNC Programmer

  Ontario

  NE

  New Era Group

  10+ YOECandidates need at least 10 years of CNC programming experience in precision machining, expert Mastercam skills, and extensive experience with turning centres and boring mills. They must read drawings, 3D CAD models and GD&T, and provide technical leadership to machinists.

  Mastercam, Concepts NREC, CNC turning centres, Horizontal boring mills, Vertical boring mills

16 companies