“digital oscilloscopes” jobs in Canada

No matching filters. Try another name.

Results

• 8h

  PCB Test Enginer - California

  Toronto, ON

  Full Time

  MS

  Millennium Software and Staffing Inc

  Candidates need experience with microcontroller-based design, test equipment and lab instruments such as oscilloscopes, power supplies, electronic loads and digital multimeters. They must be Canadian citizens or TN visa holders able to relocate to California.

  Oscilloscope, Multimeter, Power supplies, Electronic loads, Digital multimeters

• 13h

  Radio Frequency Engineer

  Calgary, AB

  Full Time

  MP

  Mpowering People

  2+ YOECandidates need a bachelor's degree in electrical engineering or a related RF, microwave or communications field, plus 2+ years of RF circuit-level design experience. Hands-on skill with RF lab equipment and strong teamwork and communication are required.

  Spectrum analyser, Network analyser (VNA), Signal generator, Oscilloscope, RF simulation tools, EM simulation tools

• 13h

  Senior Hardware Engineer

  Toronto, ON

  Full Time

  PV

  Per Vices Corporation

  4+ YOECandidates need at least 4 years of relevant experience, including lab equipment use, C programming with SPI, UART and I2C, circuit board design, and hardware or software debugging. Experience in two or more areas such as ADC/DAC use, bring-up, RF design or quality assurance is also required.

  Oscilloscope, Signal generator, Vector Network Analyzer, git

• 14h

  Analog Validation & Characterization Engineer

  Montréal, QC

  Full Time

  H

  HaiLa

  5+ YOECandidates need a BS or MS in electrical engineering or a technologist diploma with equivalent experience, plus 5+ years in analog, RF or mixed-signal test and validation. They must have PCB bring-up, RF matching-network tuning, SCPI instrument automation in Python, and PVT characterization experience.

  Analyseurs de réseaux, Analyseurs de spectre, Analyseurs de protocoles, Oscilloscopes, Alimentations, Multimètres de précision

  17h

  Analog Validation & Characterization Engineer

  Ottawa, ON

  Full Time

  H

  HaiLa

  5+ YOECandidates need 5+ years of analog, RF or mixed-signal test and validation experience, plus a BS/MS in electrical engineering or a technologist diploma with equivalent experience. Strong Python, SCPI instrument control, PCB bring-up and PVT characterization skills are required.

  network analyzer, spectrum analyzer, protocol analyzer, oscilloscope, signal generator, precision DMM

• 15h

  Engineer in Training (EIT)

  Amherst, NS

  Full Time

  SE

  Sangster Engineering Ltd

  Candidates need a CEAB-accredited engineering bachelor's degree and EIT registration or eligibility in Nova Scotia. They also need radio communications knowledge, hands-on lab equipment skills, CAD, Python, and experience with AI coding tools.

  oscilloscope, spectrum analyzer, signal generator, VNA, SDR, SolidWorks

• 16h

  Electrical Engineering Co-Op

  Calgary, AB

  Full Time

  EI

  Ecolab Inc.

  Candidates need current enrolment in an electrical, mechatronics or computer engineering program, plus C programming and circuit design knowledge. Experience with oscilloscopes and multimeters, and strong written and verbal communication, are required.

  Altium Designer, AutoCAD Electrical, oscilloscope, multimeter, PLC

• 16h

  Electronic Specialist

  Montréal, QC

  Full Time

  MG

  Media Graph Inc.

  3+ YOECandidates need a bachelor's degree in electronic, electrical or mechatronics engineering and at least 3 years of experience in electronics design or embedded systems. Strong knowledge of microcontrollers, switching power supplies, high-power LEDs and communication protocols is required.

  Oscilloscope, Multimeter, Logic analyzer

• 17h

  Hardware Developer

  Waterloo, ON

  Full Time

  HN

  HMS Networks

  Candidates need a bachelor's degree in electrical engineering or equivalent hardware design experience, plus solid Altium Designer skills and EMC/EMI knowledge. Hands-on lab work and understanding of industrial Ethernet protocols such as PROFINET, EtherCAT and EtherNet/IP are also required.

  Altium Designer, OrCAD, Oscilloscope

• 19h

  Electrical Engineering Co-Op

  Calgary, AB

  Full Time

  CC

  (CAN) CoolIT Systems Inc.

  Candidates need current enrolment in Electrical, Mechatronics or Computer Engineering, C programming experience and knowledge of circuit design. Hands-on use of oscilloscopes and multimeters and strong communication skills are also required.

  Oscilloscope, Multimeter, Altium Designer, AutoCAD Electrical, PLC

• 21h

  PCB Design Engineer II

  Markham, ON

  Contract

  T

  TekWissen ®

  3+ YOECandidates need an electronics engineering technology diploma or equivalent practical experience, typically 3 to 5 years in board-level troubleshooting or rework. They must show hands-on microscope soldering and fine-pitch BGA skills, and be comfortable with oscilloscopes, multimeters and power supplies.

  BGA rework station, Hot-air rework tool, Board preheater, Microscope, Oscilloscope, Digital multimeter

• 22h

  PCB & Embedded Systems Engineer

  Halifax, NS

  Full Time

  R

  Ranchflow

  Candidates need an electrical, electronics or computer engineering degree or equivalent experience, plus PCB design skills in Altium or KiCad and C or C++ embedded programming. Hands-on board bring-up with oscilloscopes and logic analyzers is required, and experience with GNSS, LoRa, low-power design or battery systems is an asset.

  Altium, KiCad, oscilloscope, logic analyzer, multimeter

• 1d

  Senior Digital ASIC Designer

  Montréal, QC

  Full Time

  SM

  SPARK Microsystems

  8+ YOECandidates need a Bachelor's or Master's in Electrical Engineering or equivalent, 8+ years of digital ASIC design experience with 4+ in a senior role, and strong skills in digital logic, Verilog, SystemVerilog or VHDL, and synthesis and timing analysis tools.

  Verilog, SystemVerilog, VHDL, synthesis tools, STA tools, protocol analyzers

• 2d

  Technical Analyst - Mississauga, ON

  Mississauga, ON

  $41–$46/hrFull Time

  

  Intertek Canada: Intertek is a leading Total Quality Assurance provider to industries worldwide.

  5+ YOEIntertek Canada needs candidates with 5+ years of directly related experience, an engineering degree or diploma (electrical preferred), and knowledge of product safety standards. Strong communication, organization, Microsoft Office and independent problem-solving skills are required, along with a valid driver's licence.

  spectrum analyzer, oscilloscope, multi-meter, dielectric strength tester, ground continuity tester, surge generator

• 2d

  FY27 Intern - Firmware Engineering Internship - Canada (16 months)

  Toronto, ON

  On-siteInternship

  

  Qualcomm Canada ULC

  Candidates need to be in study toward a bachelor's degree in engineering, computer science or a related field, graduating November 2028 or later. Required skills are C/C++, Python, Git, Linux development (GCC, make, shell scripting), embedded systems and microcontroller programming, and strong communication.

  Git, GCC, oscilloscope, JTAG debugger, I2C/SPI tools

• 2d

  Electronics Technician

  Kitchener, ON

  On-siteFull Time

  

  BinSentry: Follow us for all the latest company news, updates and more.

  3+ YOECandidates need an electronics technologist diploma or engineering degree and 3-5 years of troubleshooting experience. They must be skilled at soldering small components, using test instruments and reading schematics, and comfortable with command-line tools.

  Multimeter, Power supply, Oscilloscope, Spectrum analyzer, Hand tools, Jira

  2d

  Hardware Technician Manager

  Kitchener, ON

  On-siteFull Time

  

  BinSentry: Follow us for all the latest company news, updates and more.

  5+ YOECandidates need 5-8 years of electronics diagnostic and troubleshooting experience, an electronics technologist diploma or engineering degree, and a proven record of leading and mentoring technicians. Hands-on skill with oscilloscopes, spectrum analyzers and schematics is required.

  Oscilloscope, Spectrum analyzer, Odoo, Command-line tools

• 4d

  Silicon Characterization and Validation Engineer

  Markham, ON

  On-site

  B

  Blumind

  5+ YOECandidates need a BS or MS in an engineering discipline and 5+ years of lab experience characterizing analog or mixed-signal ICs. Blumind requires hands-on instrument skills, Python, MATLAB or LabVIEW scripting, and careful documentation.

  Oscilloscopes, Spectrum analyzers, Source measure units, Precision power supplies, Digital multimeters, LCR meters

• 5d

  Electronics Engineer

  Burnaby, BC

  $43.27–$57.69/hrContract

  

  Actalent: Actalent is an operating company of Allegis Group, the global leader in talent solutions.

  Candidates need experience designing power electronics such as DC/DC or AC/DC, PCB design in Altium Designer or similar, and microcontroller-based hardware. Knowledge of EMI/EMC, safety, and moving products from prototype into production is also required. An EIT or P.Eng is an asset.

  Altium Designer, oscilloscope, multimeter, electronic load

• 5d

  Embedded Software/Firmware Engineer

  Mississauga, ON

  $75k–$95k/yrOn-siteFull Time

  AT

  Axiomatic Technologies Corporation

  3+ YOECandidates need 3–5 years of embedded software or firmware experience and a bachelor's degree or higher in computer engineering, computer science or a related field. Strong C/C++ skills, familiarity with electronic circuits and hands-on use of oscilloscopes and multimeters are required.

  C, C++, Java, Dart, oscilloscope, digital multimeter

• 5d

  Senior Hardware Designer-Onsite Position

  Ottawa, ON

  Full Time

  DD

  D4S DY-4 Systems Inc.

  8+ YOECandidates need a bachelor's degree in electrical, computer or mechatronics engineering (or equivalent) and 8+ years of board-level development with hands-on lab work. Strong debugging, problem-solving and written and verbal communication skills are required.

  oscilloscope, logic analyzer, Mentor Graphics, FPGA, Raspberry Pi, Arduino

• 6d

  IP-Post Silicon Validation Engineer

  Markham, ON

  Full Time

  AM

  Advanced Micro Devices, Inc

  Candidates need a strong foundation in SoC and system architecture, digital design and validation experience, and ASIC debug skills. Scripting in Python or Ruby, lab equipment experience, excellent communication and mentoring skills, and a self-starter attitude are required.

  protocol analyzer, logic analyzer, oscilloscope

  6d

  IP-Post Silicon Validation Engineer

  Vancouver, BC

  Full Time

  AM

  Advanced Micro Devices, Inc

  Candidates need a strong foundation in SoC and system architecture, digital design and validation experience, and ASIC debug skills. Scripting in Python or Ruby, lab equipment experience, excellent communication and mentoring skills, and a self-starter attitude are required.

  protocol analyzer, logic analyzer, oscilloscope

• 6d

  IP-Post Silicon Validation Engineer

  Vancouver, BC

  Full Time

  AI

  AMD, Inc.

  Candidates need a strong foundation in SoC and processor architecture, digital design and post-silicon validation, plus ASIC debug and scripting skills. Excellent communication, collaboration and mentoring abilities are also needed.

  Protocol analyzers, Logic analyzers, Oscilloscopes

21 companies