“schematic tools” jobs in Canada – Page 17

No matching filters. Try another name.

Results

• 8d

  433A Millwright

  Milton, ON

  

  CRH Jobs

  5+ YOECandidates need a valid 433A Millwright License and five years of millwright experience in heavy industry. Welding, cutting and brazing skills, blueprint reading and troubleshooting experience are also required.

  Welding equipment, Cutting equipment, Hoisting equipment, Rigging equipment

  8d

  Licensed Electrician - 442A or 309A

  Milton, ON

  $42.73/hr

  

  CRH Jobs

  Candidates need a valid 309A and/or 442A licence, thorough knowledge of the Ontario Electrical Safety Code, and PLC programming and troubleshooting skills. Experience working at heights and in confined spaces, intermediate computer skills, and willingness to work rotating shifts are also required.

  PLC, motor control centres, switchgear, transformers, AC/DC drives, relays

• 8d

  Millwright

  Barrie, ON

  $95k–$100k/yrFull Time

  

  Randstad Canada

  Candidates need a licensed Industrial Millwright 433 A, ideally Red Seal, with applied math, mechanical and basic electrical aptitude. Experience with MIG, TIG and arc welding and the ability to read hydraulic schematics are required.

  hoists, lift trucks, hand tools, power tools, grinders, drill press

  9d

  Millwright

  Nisku, AB

  $40/hrContract

  

  Randstad Canada

  Candidates need an active Alberta Journeyperson Millwright ticket or Red Seal certification and solid experience overhauling heavy rotating machinery and gearboxes. Hydraulics experience, sharp troubleshooting skills and strong spoken and written English are also required.

  Laser alignment tools

  9d

  Red Seal Millwright

  Delta, BC

  $47.67/hrFull Time

  

  Randstad Canada

  2+ YOECandidates need a valid Red Seal or provincial Journeyperson certificate as an Industrial Mechanic (Millwright) and at least 2 years of industrial plant maintenance experience. Strong diagnostic skills, the ability to work independently, and the tools to do the job are also required.

  CMMS software, hand tools, welding equipment, refrigeration equipment

• 8d

  Repair Technician 2

  Georgina, ON

  $25.38/hrFull Time

  

  Techtronic Industries Canada Inc.: Techtronic Industries Company Limited (“TTI”, or the “Company”), founded in 1985 by German entrepreneur Horst Julius Pudwill, is a world leader in…

  1+ YOECandidates need a high school diploma or equivalent, mechanical and diagnostic skills, strong attention to detail, and at least 3 months of repair or reconditioning experience. Basic computer skills and fluent English, written and spoken, are also required.

  hand tools, small power tools, computer

• 9d

  Kananaskis East Maintenance Supervisor

  Calgary, AB

  $72k–$95k/yr

  GO

  Government of Alberta

  2+ YOECandidates need a two-year technical diploma in a related field plus two years of facilities or maintenance experience, or an equivalent combination. A valid Class 5 driver's licence, First Aid certificate and WHMIS training are required, along with knowledge of occupational health and safety rules and supervision of contractors.

  Excel, Outlook, heavy equipment, HVAC systems, electrical schematics

• 9d

  Senior Electrical Engineering Specialist

  Kitchener, ON

  

  Trudell Medical International

  10+ YOECandidates need an engineering degree in electrical or mechatronics, with 10+ years of product development experience and medical device launches. Strong analog, digital and embedded hardware skills and experience leading electrical teams are required.

  oscilloscope, impedance analyzer, electronic loads, logic analyzer

• 9d

  Shop Operations Manager

  Collingwood, ON

  On-siteFull Time

  

  Impossible Metals

  5+ YOECandidates need 5+ years of hands-on shop, manufacturing, fabrication or field operations experience, plus experience with ERP and inventory systems. They also need supervisory experience, a strong health and safety background, and mechanical and electrical aptitude. A valid driver's licence is required.

  Odoo, overhead crane, forklift, multimeter, oscilloscope

  9d

  Electrical Engineer / Senior Electrical Engineer

  Collingwood, ON

  On-siteFull Time

  

  Impossible Metals

  Candidates need a bachelor's degree in electrical, mechatronics, or a related engineering field, plus professional experience designing electrical systems for robotics or complex electromechanical products. Strong skills in analog, digital, and power electronics, hands-on testing, and schematic and documentation work are required.

  test equipment, PCB design software

• 9d

  Packaging Machine Operator

  Aylmer, ON

  

  Organigram Global

  Candidates need proven machine operator experience, the ability to read blueprints, schematics and manuals, and attention to detail. They must be physically fit, able to lift up to 25 lbs, work shift schedules, pass a criminal background check, and hold a high school diploma or equivalent.

  labeler, printer, robotic filler, pump, measuring tools

• 9d

  Electrical Production Technician II [646]

  Burnaby, BC

  On-siteFull Time

  

  D-Wave Quantum

  3+ YOECandidates need a diploma in electrical or electronics engineering technology and 3+ years in electronics manufacturing or production testing. They must read schematics and wiring diagrams, use test instruments and solder, and handle lifts up to 30 lbs.

  Digital multimeter, Oscilloscope, Programmable power supply, Automatic cable tester, NetSuite, Jira

• 9d

  Electrical creo designer

  Edmonton, AB

  JC

  Johnson Controls

  Candidates need an electrical engineering technology diploma or degree and strong PTC Creo or similar 3D CAD skills. Experience with electrical equipment design, wire harnesses and production drawings and BOMs is required.

  PTC Creo, Windchill, SAP

  9d

  Electrical equipment designer

  Edmonton, AB

  JC

  Johnson Controls

  5+ YOECandidates need a degree in electrical engineering or a technical diploma with equivalent experience, plus 5+ years in equipment design or manufacturing engineering. They must know PTC Creo, Windchill PLM, SAP and electrical codes (CEC, NEC, UL, CSA), and have wire harness experience.

  PTC Creo, Windchill PLM, SAP

• 9d

  Mechanical Engineer

  Cambridge, ON

  Full Time

  

  Shred-Tech Corporation: Shred-Tech® specializes in manufacturing complete shredding and recycling solutions.

  8+ YOECandidates need a mechanical engineering degree, 8+ years of mechanical design experience with industrial equipment, and skill in SolidWorks and DFM/DFA. Hydraulics or fluid power experience, a P.Eng. designation or eligibility, and strong communication skills are preferred.

  SolidWorks, ERP system, MRP system

• 9d

  Mechanical Assembler

  Cambridge, ON

  TI

  Tigercat Industries

  Candidates need mechanical skills with hand and power tools and related experience such as small engine repair, equipment maintenance or trades courses. Experience reading blueprints is an asset. The role requires the ability to adapt to changing conditions and work well in a team.

  Hand tools, Power tools, Pneumatic tools, Overhead crane, Jib crane

• 9d

  Assistant Manager I

  Guelph, ON

  $18.20/hrPart Time

  DT

  DOLLAR TREE STORES CANADA, INC.

  Candidates need strong communication, customer service and problem-solving skills, and the ability to read operational directives. Retail or store management experience is preferred, along with the ability to lift up to 55 lbs.

  cash register, POS

• 9d

  Welder

  Wynyard, SK

  Full Time

  SM

  Saskatchewan Mining and Minerals (Big Quill) Inc.

  Candidates need hands-on welding experience, especially MIG and arc welding, and the ability to read schematics and blueprints. Comfort with measuring tools, basic math, hand and power tools, and safe work habits is expected.

  press brake, calipers, crane, forklift

• 9d

  R&D Prototyping III / Prototypage R-D III

  Montréal, QC

  Full Time

  

  Boston Scientific

  3+ YOEBaccalauréat en génie; Minimum de 3 ans d'expérience en ingénierie de fabrication; Compréhension des procédés de fabrication et du génie mécanique

  SolidWorks, Windchill, CAD, PLM, MRP, Microsoft Excel

  9d

  R&D Prototyping III / Prototypage R-D III

  Montréal, QC

  

  Boston Scientific

  3+ YOEBachelor's degree in engineering; Minimum 3 years in manufacturing or related engineering; Working knowledge of CAD and PLM systems

  SolidWorks, Windchill, CAD, PLM, MRP, Microsoft Excel

• 9d

  Electronics Engineer

  Oakville, ON

  $40–$50/hrContract

  

  Actalent: Actalent is an operating company of Allegis Group, the global leader in talent solutions.

  3+ YOECandidates need over 3 years of hands-on hardware testing and PCB troubleshooting experience, soldering skill, and Altium proficiency. Experience with medical or regulated electronics and IEC standards is valued, along with an electronics engineering or technician education.

  Altium, Oscilloscope, Multimeter, Signal generator, Soldering iron

• 9d

  Senior Controls Designer

  Coquitlam, BC

  $90k–$140k/yrOn-siteFull Time

  AL

  Automated Logic Controls

  4+ YOEAutomated Logic needs candidates with 4+ years of HVAC controls or building automation experience and a bachelor's or diploma, or 6+ years with a high school diploma. Strong English communication, BACnet and Modbus knowledge, and comfort climbing ladders above 8 feet are required.

  Automated Logic software, BAS engineering design tools, Microsoft Visio

• 9d

  Heavy Duty Mechanic

  Fort MacKay, AB

  Full Time

  UR

  United Rentals of Canada, Inc.

  5+ YOEUnited Rentals needs candidates with 5+ years repairing equipment, advanced mechanical aptitude and knowledge of construction equipment schematics. Candidates need a high school diploma, a valid driver's licence with an acceptable driving record, their own tools, and strong customer service and communication skills.

  Service vehicle

  9d

  Heavy Duty Field Mechanic

  Fort McMurray, AB

  Full Time

  UR

  United Rentals of Canada, Inc.

  5+ YOECandidates need 5+ years repairing equipment, advanced mechanical aptitude and a strong understanding of schematics. They also need a high school diploma, a valid driver's licence with a clean record, their own tools, and strong customer service and communication skills.

  service vehicle

17 companies