“electronic interfaces” jobs in Canada – Page 25

No matching filters. Try another name.

Results

• 1mo

  Hardware Validation Engineer, Sr Staff

  Nepean, ON

  S

  Synopsys

  6+ YOECandidates need 6-8+ years of high-speed hardware design and validation experience and expert Cadence Allegro skills. They also need strong signal integrity knowledge, bench debugging experience and familiarity with JTAG, I2C, SPI and UART interfaces.

  Cadence Allegro, logic analyzer, oscilloscope, VNA, spectrum analyzer, protocol analyzer

  1mo

  Sr Staff PCB Design Engineer

  Markham, ON

  S

  Synopsys

  10+ YOECandidates need 10+ years of high-speed PCB design or signal integrity experience and strong circuit and transmission line theory. They also need hands-on 3D electromagnetic modelling experience with Ansys HFSS or similar tools, plus a Bachelor's degree in electrical or electronics engineering.

  Ansys HFSS, PCB layout tools, Windows, Linux

• 1mo

  Avionics Certification Engineer – DO-178C, DO-254, FPGA/ASIC & Embedded Systems

  Montréal, QC

  AN

  Astra North Infoteck Inc.

  15+ YOEAstra North Infoteck Inc. needs candidates with deep experience in aircraft software and hardware certification, including DO-178C and DO-254. They also need FPGA or ASIC design experience, requirements tools like DOORS or JAMA, and experience with FAA and EASA rules.

  DOORS, JAMA

  1mo

  Avionics Systems Requirements Engineer (ARP4754A, DOORS, DO-178C, DO-254, IBM DOORS, Polarion)

  Montréal, QC

  AN

  Astra North Infoteck Inc.

  8+ YOECandidates need 8 to 15+ years of avionics systems engineering experience, with prior work on an OEM, Tier-1 supplier or certified airborne systems program. They need hands-on requirements management tool experience and knowledge of ARP4754A, DO-178C and DO-254.

  IBM DOORS, Polarion, Jama Connect, Codebeamer, PTC Integrity, Cameo Systems Modeler

  1mo

  Senior Avionics Qualification & Verification Engineer (DO-160, ARP4754A, DOORS, Certification, Environmental Testing)

  Montréal, QC

  AN

  Astra North Infoteck Inc.

  10+ YOECandidates need 10+ years in avionics verification, qualification or certification, and at least 5 years reviewing qualification documentation. Hands-on certified aircraft program experience and prior OEM or Tier-1 supplier experience are required.

  IBM DOORS, Polarion, Jama, Cameo / MagicDraw, Teamcenter, Windchill

  1mo

  Senior Avionics Systems Engineer (Open IMA, ARINC 653, DO-297, ARP4754A, Certification)

  Montréal, QC

  AN

  Astra North Infoteck Inc.

  12+ YOECandidates need 12 to 20+ years of avionics systems engineering experience, including hands-on Open IMA or IMA development and certification. They must have worked on FAA, EASA or TCCA certification programs and know DO-297, DO-178C, DO-254 and ARP4754A.

  Aerospace engineering, Electrical engineering, Computer engineering, ICT system integration, Regulatory compliance, Communication skills

• 1mo

  Data Operations Engineer

  Mississauga, ON

  

  goeasy: is a Canadian company, headquartered in Mississauga, Ontario, that provides non-prime leasing and lending services through its easyhome,…

  2+ YOECandidates need a bachelor's degree or equivalent experience and 2-4 years supporting enterprise data platforms. They should have hands-on Azure Databricks and Microsoft SQL Server skills, plus experience with ETL, APIs and SFTP integrations.

  Azure Databricks, Azure Data Factory, SQL Server, SSIS, SFTP, Azure DevOps

• 1mo

  Manager, Technical Support – Projects & Services (Global)

  Toronto, ON

  On-siteFull Time

  

  Ralliant

  7+ YOECandidates need a bachelor's degree in electrical engineering, electronics or a related field, plus 7+ years in technical support, engineering or field service. Leadership across global or multi-site teams and strong troubleshooting skills are required; power systems and project or commissioning experience are preferred.

  Salesforce, JIRA

• 1mo

  Ingénieur(e) ou analyste, analyse d’opérabilité / Engineer or Analyst, Operability Analysis

  Longueuil, QC

  Full Time

  

  RTX

  3+ YOEBaccalauréat en ingénierie, 3 à 7 ans d’expérience; Maîtrise en ingénierie, 2 à 5 ans d’expérience (atout); Anglais essentiel, français un atout

  Matlab, Simulink, MS Excel, VBA, Enovia V6, PLM

  1mo

  Mechanical Technician – Machinist

  Halifax, NS

  Full Time

  

  RTX

  Candidates need machinist certification or mechanical engineering technician training, CAD design skills, and CNC experience. Mastercam, Haas and SolidWorks experience is required, grinding or machining experience is an asset, and candidates must be eligible to work in Canada and fluent in English.

  Mastercam, SolidWorks, Haas CNC, CNC lathe, CNC milling machine, Grinder

• 1mo

  Electrical Engineer

  Richmond, BC

  $65–$75/hrContract

  

  Randstad Canada

  3+ YOECandidates need a Bachelor's degree in Electrical Engineering and 3+ years in power electronics, electrical design, testing or power systems. Hands-on experience with electrical lab test equipment is required.

  Oscilloscope, Digital multimeter, Clamp meter, Power quality analyzer, Spectrum analyzer, Data acquisition system

  1mo

  Electrical Engineer

  Richmond, BC

  $50–$55/hrContract

  

  Randstad Canada

  5+ YOERandstad Canada needs candidates with a relevant engineering degree and years of design and systems engineering experience. They must know AC circuits, measurement tools, communication protocols, and have basic C or Python skills.

  Jira, Confluence, Oscilloscope, Power analyzer, CAN analyzer, AC and DC sources

  1mo

  Senior Embedded Software Engineer - BSP and Secure Bootloaders

  Kanata, ON

  $79.66–$86.59/hrContract

  

  Randstad Canada

  8+ YOECandidates need 8+ years of BSP, QNX or Linux kernel and bootloader work, at least two full board bring-ups, and a Bachelor's degree in a technical field. They also need strong low-level C and assembly skills, ARM Cortex knowledge, and hands-on experience with secure boot, HSM or SHE and cryptography.

  JTAG debugger, oscilloscope, logic analyzer, Git, SVN

  1mo

  Intermediate Embedded Software Engineer – BSP and Bootloaders

  Kanata, ON

  $76.20–$79.66/hrContract

  

  Randstad Canada

  4+ YOECandidates need a bachelor's degree in a technical field, 4+ years of BSP and bootloader work on Linux or QNX, and 2+ full target board bring-ups. Strong low-level C, ARM Cortex knowledge, and lab debugging with JTAG, oscilloscopes and logic analyzers are required.

  JTAG debugger, oscilloscope, logic analyzer, Git, SVN

  1mo

  Customs Specialist - Brokerage

  Montréal, QC

  Full Time

  

  Randstad Canada

  2+ YOERandstad Canada needs candidates with 2 to 5 years of customs brokerage, import or logistics experience, and a strong grasp of HS classification, Incoterms and free trade agreements. Entry-writing software and customs portal experience, plus attention to detail and good communication, are needed. The CCS designation is highly preferred.

  CargoWise, Descartes, Integration Point, US ACE, ACROSS

  1mo

  Customs Specialist - Brokerage

  Dorval, QC

  Full Time

  

  Randstad Canada

  2+ YOERandstad Canada needs candidates with 2 to 5 years of customs brokerage, import or logistics experience, and a strong grasp of HS classification, Incoterms and free trade agreements. Entry-writing software and customs portal experience, plus attention to detail and good communication, are needed. The CCS designation is highly preferred.

  CargoWise, Descartes, Integration Point, US ACE, ACROSS

  1mo

  Systems Engineers – End-to-End Software Diagnostics and Observability

  Kanata, ON

  $72.73–$96.98/hrContract

  

  Randstad Canada

  3+ YOECandidates need a Bachelor's or Master's in a computing, engineering or data field, strong Python skills, and familiarity with AI/ML workflows, REST APIs, Git, Docker and GCP. The autonomous role needs 4 to 6 years of experience and the mentored role needs 3 to 5 years.

  Python, GCP, Vertex AI, BigQuery, Docker, LangChain

  1mo

  Electrotechnicien

  LaSalle, QC

  $37–$45/hrFull Time

  

  Randstad Canada

  5+ YOECandidates need a DEC or AEC in Automation or Industrial Electronics, a valid License C, and 5 to 10 years of relevant experience. Strong PLC skills, robotics aptitude, autonomy and the ability to communicate in French are required.

  PLC, industrial robots, HMI, sensors, electrical design software

  1mo

  Senior Electronics Designer – High-Speed PCB and Embedded Systems

  Waterloo, ON

  $100k–$135k/yrFull Time

  

  Randstad Canada

  8+ YOECandidates need a bachelor's degree in electrical or computer engineering (master's or PhD preferred), typically 8+ years of hardware design experience, and expert skills in PCB layout tools, high-speed and mixed-signal design, signal and power integrity, and lab test equipment. Strong technical leadership and communication skills are required.

  Siemens PADS, Altium Designer, Cadence Allegro, high-bandwidth oscilloscope, logic analyzer, spectrum analyzer

• 1mo

  PLC Programmer

  Vaughan, ON

  Full Time

  

  Martinrea International Inc.: The company employs approximately 19,000 skilled and motivated people at more than 58 manufacturing, engineering and technical centers in Canada,…

  3+ YOECandidates need an electro-mechanical technician diploma or equivalent and a Red Seal 309A or 442A certification. They need 3-5 years of similar experience, strong troubleshooting and English communication skills, and proficiency in Microsoft Office.

  PLC, Robot controllers, Medar weld controllers, Lincoln weld controllers, Miller weld controllers, Panasonic weld controllers

• 1mo

  Javascript Developer

  Montréal, QC

  Full Time

  

  GURUS Solutions: Founded in 2005, GURUS Solutions is a leading North American NetSuite and Boomi services provider.

  Candidates need programming experience with Java, JavaScript or C++, and a bachelor's degree in computer science, software engineering, information technology or a relevant mix of studies and experience. Good communication skills and English proficiency are required.

  NetSuite, Oracle API, Shopify, Magento

• 1mo

  Sr Full Stack SW Engineer

  Remote in Canada

  Remote

  

  hireVouch: Company Marketing Strategy

  Candidates need expert TypeScript skills and full-stack JavaScript experience with frameworks such as Angular, Node and React. They should be familiar with AWS serverless services or willing to learn them, and show strong computer science fundamentals and good version control and CI/CD practice.

  AWS, Angular, React, Electron, Capacitor, GraphQL

• 1mo

  Electrical, Instrumentation and control instructor

  Kuujjuaq, QC

  KR

  Kativik Regional Government

  5+ YOEDEP en électronique industrielle ou technologie électrique; Licence C d'électricien (hors construction) ou équivalent; Cinq ans d'expérience en systèmes électriques et d'automatisation

  PLC, HMI, SCADA, CMMS, Microsoft Office

• 1mo

  Security Systems Instrumentation Technician

  Manitoba

  Full Time

  

  Canadian Nuclear Laboratories LTD

  Candidates need a college diploma in industrial instrumentation or electronics, or a trade certificate in instrumentation and control, plus relevant experience. They must read technical drawings, troubleshoot complex hardware and software, and hold Reliability Status with Site Access Security Clearance.

  trucks, bucket trucks, lifts, booms, ATVs, vans

11 companies