“Process meter” jobs in Canada – Page 33

No matching filters. Try another name.

Results

• 29d

  Electrician

  Cobourg, ON

  Full Time

  

  Johnvince Foods: Johnvince Company™ has been an industry leader in snacking and related food manufacturing, distribution, and innovation for over half a century.

  3+ YOECandidates need 3 to 4 years of industrial electrical maintenance or manufacturing experience, and a Licensed Industrial Electrician (442A) or Construction & Maintenance Electrician (309A) licence. They must read electrical drawings, work safely at voltages up to 600 V, and know ESA, OHSA, GMP and lockout/tagout rules.

  PLC, electrical testing equipment, CMMS, electrical meters, machine shop tools

• 29d

  Electrician - Afternoon Shift

  Hamilton, ON

  AM

  Avl manufacturing

  5+ YOECandidates need at least 5 years of industrial experience and a qualified industrial electrician credential, preferably a Red Seal. Basic PLC programming, control panel knowledge and a valid passport and driver's licence for North American travel are also required.

  PLC

  29d

  Service Electrician

  Hamilton, ON

  AM

  Avl manufacturing

  5+ YOECandidates need a 309A or 442 electrician licence (interprovincial ticket or Red Seal preferred), at least 5 years of industrial or commercial experience, and a valid passport and driver's licence for North American travel. Basic PLC programming, control panel knowledge and oil and gas or power experience are assets.

  PLC, switchgear, motors, conduit

• 29d

  Electric Motor Mechanic

  Mississauga, ON

  $25–$35/hrFull Time

  AI

  Ainsworth Inc

  Ainsworth Inc asks for grade 12 or equivalent, good English communication, strong math and writing skills, and a mechanical aptitude. Candidates must work with or without supervision and hold a valid driver's licence with a clean record.

  growler, surge tester, megger, core loss tester, resistance bridge, verniers

• 29d

  Control Room Operator

  Grande Prairie, AB

  

  Paramount Resources Ltd.: is an independent, intermediate Canadian energy company.

  6+ YOECandidates need at least six years of gas plant operations, including three years on a DCS console in a large sour processing facility. Experience with amine sweetening, glycol dehydration, compression and acid gas injection, plus DeltaV or similar DCS and SCADA platforms, is required.

  DeltaV, SCADA, HMI, Maximo, Microsoft Office

• 29d

  Water & Wastewater Operator I

  Westbank, BC

  Full Time

  

  Westbank First Nation

  Westbank First Nation needs candidates with EOCP Level 1 water distribution and wastewater collection certificates, a Class 5 BC driver's licence and first aid training. Basic computer, SCADA and mechanical skills are also expected.

  SCADA, Excel, Word, AutoCAD, field test kits, WFN laptop

• 29d

  Technology Development Manager

  Mississauga, ON

  Full Time

  

  Neptune

  6+ YOENeptune needs an engineering leader with a bachelor's degree in engineering, 6+ years of engineering experience with progression into management, and experience managing regulatory compliance or intellectual property functions. Strong interdisciplinary and cross-functional communication skills are also required.

  Research, Leadership, Regulatory compliance, Legal research, Electrical engineering, Communication skills

  29d

  Sr. Manager, Customer Communication & Support

  Mississauga, ON

  Full Time

  

  Neptune

  7+ YOE3+ MgmtCandidates need a bachelor's degree or equivalent experience, 7+ years in customer support, contact centre or field service, and 3+ years managing people. Strong coaching, communication and process skills are essential.

  contact center system, ticketing system, scheduling system, CRM

• 29d

  Maintenance Technician

  Berwick, NS

  $82k/yrFull Time

  

  Eden Valley Incorporated

  Candidates need a trade certificate such as Electrical, Millwright, Machinist or Industrial Mechanic, or enrollment in one, which is an asset. Previous food processing maintenance experience, strong problem-solving skills and willingness to work rotating shifts are required.

  Hand tools, Power tools, Electric meters, Material handling equipment, Hydraulic bin dumpers, Tray sealing machines

• 29d

  Maintenance Specialist 1

  Teulon, MB

  Full Time

  

  Vidir Solutions Inc: Vidir Solutions is a leading manufacturer and worldwide supplier of vertical motorized inventory management, material handling, storage carousels…

  1+ YOEVidir Solutions Inc needs candidates with 1-3 years of maintenance experience, knowledge of hand tools, power tools and manufacturing principles, and knowledge of workplace compliance regulations. Strong communication, problem-solving, multitasking and basic computer, literacy and numeracy skills are also required.

  hand tools, power tools

  29d

  Maintenance Specialist 1

  Arborg, MB

  Full Time

  

  Vidir Solutions Inc: Vidir Solutions is a leading manufacturer and worldwide supplier of vertical motorized inventory management, material handling, storage carousels…

  1+ YOEVidir Solutions needs candidates with 1-3 years of maintenance experience and knowledge of hand tools, power tools and manufacturing principles. A trades certificate is an asset, and strong problem-solving, communication and basic computer skills are needed.

  hand tools, power tools, HVAC equipment, electrical equipment, plumbing equipment

• 29d

  Quality Inspector

  Edmonton, AB

  Full Time

  

  Powell

  Candidates need an electrical engineering diploma or degree (a journeyman trade ticket is an asset), 0-3 years in manufacturing, and skill with test equipment and electrical prints. Strong written and spoken English, basic computer skills and safety training are also required.

  clamp-on meter, voltage detector, Hi-Pot, PLC, HMI, relays

  29d

  Senior Quality Inspector

  Edmonton, AB

  Full Time

  

  Powell

  3+ YOECandidates need 3 to 5 years of quality inspection experience on electrical equipment, a high school diploma or trade certificate, and the ability to read electrical prints and apply industry codes and standards. Strong English, written and verbal, is required.

  Clamp-on meter, Voltage detector, PLC, HMI, Microprocessor-based relays

  29d

  Wiring Technician - Day Shift

  Edmonton, AB

  Full Time

  

  Powell

  Candidates need a high school diploma, 0-1 years of manufacturing experience, the ability to read prints and wiring diagrams, basic math and English, and legal authorization to work in Canada.

  Hand tools, Electric tools, Air tools, Vibrating tools, Tin snips, Power tools

  29d

  Wiring Technician - Day Shift

  Alberta

  Full Time

  

  Powell

  Candidates need a high school diploma, 0-1 years of manufacturing experience, the ability to read prints and wiring diagrams, basic math and English, and legal authorization to work in Canada.

  Hand tools, Electric tools, Air tools, Vibrating tools, Tin snips, Power tools

• 29d

  Industrial Journeyman Electrician (or 3rd Year Apprentice)

  Barwick, ON

  Full Time

  

  West Fraser: West Fraser is a diversified wood products company with facilities in Canada, the U.S., the U.K.

  Candidates need a valid Inter-Provincial or Provincial Journeyperson Electrician certification, or be in their third year or near completion. Strong computer skills, a valid driver's licence, the ability to work at heights and shift work are also required.

  Electrical test equipment, Calibrators, Hand tools

• 29d

  Instrumentation - Journeyperson

  Valleyview, AB

  

  CDN Controls ULC

  Candidates need Journeyperson Instrumentation Technician status, a valid Class 5 licence with a clean driver abstract, and H2S, First Aid, OSSA Fall Protection, Aerial Work Platform, CSO and CSTS tickets. Oil and gas construction or maintenance experience is an asset, and the work is done outdoors and at heights in all weather.

  Hart Communicator, Tubing bender, Hand tools, Power tools

• 29d

  Electrical Engineer in Training

  Toronto, ON

  $53k–$66k/yrFull Time

  

  BGIS

  2+ YOECandidates need an electrical engineering degree from an accredited university and at least 2 years of electrical design or engineering experience. They should know electrical and provincial building codes, be detail-oriented, and communicate well. Pursuing a P.Eng. is required, and a driver's licence is needed.

  MS Office

  29d

  Senior Energy Engineer

  Markham, ON

  $82k–$103k/yrFull Time

  

  BGIS

  5+ YOECandidates need a Mechanical or Electrical Engineering degree, a Professional Engineer designation and at least 5 years of energy management experience. Strong skills in utility markets, building systems, energy analytics and project management are required.

  Excel, Word, PowerPoint, Access, Building automation systems

  29d

  Energy Engineer

  Markham, ON +1

  $74k–$92k/yrFull Time

  

  BGIS

  5+ YOECandidates need an engineering degree in mechanical or electrical engineering, a Professional Engineer designation, and at least 5 years in energy management. Strong utility, controls and project management experience is required, along with CEM or LEED accreditation and a driver's licence.

  Excel, Word, PowerPoint, Access, Building automation systems

  29d

  Stationary Engine Mechanic

  Québec, QC

  Full Time

  

  BGIS

  3+ YOEBGIS needs candidates with Class 4 B stationary engineer certification and up to three or more years of experience. Candidates should know boiler, chiller and generator operation, troubleshoot mechanical problems, and write clear shift logs and reports.

  boilers, chillers, diesel generator, hand tools, power tools, computerized control systems

  29d

  Stationary Engine Mechanic

  Matane, QC

  Full Time

  

  BGIS

  3+ YOEBGIS needs candidates with Class 4 B stationary engineer certification and up to three or more years of experience. Candidates should know boiler, chiller and generator operation, troubleshoot mechanical problems, and write clear shift logs and reports.

  boilers, chillers, diesel generator, hand tools, power tools, computerized control systems

  29d

  Stationary Engine Mechanic

  Matane, QC

  Full Time

  

  BGIS

  3+ YOEBGIS needs candidates with Class 4 B stationary engineer certification and up to three or more years of experience. Candidates should know boiler, chiller and generator operation, troubleshoot mechanical problems, and write clear shift logs and reports.

  boilers, chillers, diesel generator, hand tools, power tools, computerized control systems

• 29d

  EIT, Instrumentation & Controls (1-Year Contract)

  Richmond Hill, ON

  ?

  2+ YOEThis one-year contract offers hands-on experience with SCADA, PLCs, industrial networks, field instrumentation, programming and control systems, while contributing to real-world projects…; Assist with project reviews…

  EIT, SCADA, Control systems, ICS, Troubleshooting, Process improvement

13 companies