“Maintenance work order system” jobs in Canada – Page 36

No matching filters. Try another name.

Results

• 5d

  Diagnostic Imaging Technologist III

  Newfoundland and Labrador

  Full Time

  

  Newfoundland and Labrador Health Services

  2+ YOECandidates need graduation from a recognized MRI certification program (or admission to one), registration with CAMRT, and at least two years as a Diagnostic Imaging Technologist I, with registration with the NLCHP required by May 1, 2025. The employer also asks for a certificate of conduct and willingness to complete an intravenous therapy program.

  PACS, patient positioning equipment

  5d

  Diagnostic Imaging Technologist III

  Newfoundland and Labrador

  Full Time

  

  Newfoundland and Labrador Health Services

  2+ YOECandidates need graduation from a recognized MRI certification program and registration with CAMRT. At least two years as a Diagnostic Imaging Technologist I is preferred, and registration with the Newfoundland and Labrador Council of Health Professionals is required.

  MRI equipment, PACS

  5d

  Trades Worker II

  Newfoundland and Labrador

  

  Newfoundland and Labrador Health Services

  Candidates need a valid Newfoundland and Labrador Fourth-Class Power Engineer's Certificate and the ability to troubleshoot and work independently. Three to five years of recent power plant operation and maintenance experience is preferred, along with a clear RCMP or local police certificate of conduct.

  steam boiler, BAS, computerized work order system, air compressor, hand tools

  5d

  Trades Worker II

  Newfoundland and Labrador

  

  Newfoundland and Labrador Health Services

  Candidates need a valid Fourth-Class Power Engineer's Certificate from Newfoundland and Labrador, the ability to work independently on diagnostics and troubleshooting, and good communication skills. A satisfactory work record and a Certificate of Conduct from the RCMP or local police are also required.

  Steam boilers, Air compressors, Pumps, Sterilizer, Computerized work order system, Hand tools

  5d

  Trades Worker II

  Newfoundland and Labrador

  $27.61–$30.67/hr

  

  Newfoundland and Labrador Health Services

  5+ YOENewfoundland and Labrador Health Services needs a Red Seal plumber with at least five years of commercial experience and CSA medical gas piping certification or a valid medical gas licence with three years of field installation. A valid Class 5 driver's licence and leadership, coordination and independent-work skills are also required.

  hand tools, pliers, screwdrivers, electrical tools

  5d

  Trades Worker II

  Newfoundland and Labrador

  Full Time

  

  Newfoundland and Labrador Health Services

  Candidates need a Journeyperson Refrigeration/Brazing Certificate and Red Seal certification, plus solid knowledge of mechanical, HVAC, electrical and refrigeration systems. A Class V driver's licence, a clean driving record and a police certificate of conduct are also required.

  hand tools, ladders, scaffolding, blueprints, computer

  5d

  Trades Worker I

  Newfoundland and Labrador

  Temporary

  

  Newfoundland and Labrador Health Services

  1+ YOECandidates need high school completion, one year of post-secondary trade training in building, electrical, plumbing or mechanical trades, and 1 to 2 years of skilled trade experience. They also need work order and preventative maintenance system experience, a valid Class V licence, a certificate of conduct, and transportation of dangerous goods training.

  Power tools, Table saw, Electric drill, Voltage meter, Work order system

  5d

  TRADES WORKER III

  Newfoundland and Labrador

  Full Time

  

  Newfoundland and Labrador Health Services

  5+ YOECandidates need a journeyperson certification in carpentry, plumbing, electrical or mechanical work, and at least 5 years of hospital construction experience. Supervisory or management experience, a Class V driver's licence, computer skills and a satisfactory Code of Conduct are also required.

  CMMS, Microsoft Excel, Microsoft Word

  5d

  OT Rehab Assistant

  Newfoundland and Labrador

  Full Time

  

  Newfoundland and Labrador Health Services

  Candidates need completion of a recognized Rehabilitation Assistant program, or an OTA or PTA program, plus experience in a rehabilitation setting. They also need current or willing-to-obtain BLS certification, a class five driver's licence and a personal vehicle, and strong communication and teamwork skills.

  Meditech, TELUS Med Access EMR, CRMS, Microsoft Office

  5d

  Trades Worker I

  Newfoundland and Labrador

  Full Time

  

  Newfoundland and Labrador Health Services

  1+ YOECandidates need a one-year post-secondary trades certificate in a building, electrical, plumbing or mechanical trade, and at least one year of trades experience in the last five years. They also need a valid Class V licence, infection control experience, the ability to lift over 50 lbs, and an RCMP or police Certificate of Conduct.

  power tools, table saws, electric drills, voltage meter, hand tools, ladders

  5d

  Clerk Typist III (FCT)

  Newfoundland and Labrador

  Temporary

  

  Newfoundland and Labrador Health Services

  2+ YOECandidates need an Office Administration diploma with recent clerical experience, a medical terminology course, and strong Microsoft Office skills. A Newfoundland and Labrador Class 5 driver's licence and access to a private vehicle are also required, along with willingness to complete EMR training.

  Med Access, Meditech, CRMS, Microsoft Office, Microsoft Excel, Microsoft PowerPoint

• 5d

  Mechanic / Millwright

  Elmira, ON

  $48.36/hrFull Time

  

  LANXESS Canada Co./Cie: LANXESS is a leading specialty chemicals company with sales of EUR 6.4 billion in 2024.

  Candidates need a certified Ontario Industrial Millwright credential, confined space hazards training and experience with safety permitting systems. Chemical manufacturing experience, the ability to read technical drawings, and familiarity with laser alignment, vibration analysis and SAP are also needed.

  SAP, Excel, Word, Laser alignment equipment, Vibration analysis equipment, Oil analysis equipment

• 5d

  Merchandise Execution Associate Part Time - 7236 Timmins

  Timmins, ON

  On-sitePart Time

  

  HOME DEPOT CANADA, INC.: The Home Depot Canada is the Canadian arm of the world’s largest home improvement retailer.

  1+ YOECandidates need a high school diploma or GED and about one year of relevant work experience. Basic computer skills, teamwork, attention to detail, and safe work habits are required.

  Basic hand tools, Store systems, Merchandising reports

• 5d

  Kitchen Supervisor

  Vancouver, BC

  Full Time

  P

  Provisions

  2+ YOECandidates need two to three years of experience as a line cook or supervisor in a similar environment, plus a Red Seal, culinary arts degree or equivalent education and experience. Strong organization, leadership, menu development, communication and computer skills are required, along with flexibility to work evenings, weekends and holidays.

  POS system

  5d

  Cafe Supervisor

  Vancouver, BC

  $21/hrFull Time

  P

  Provisions

  3+ YOECandidates need 3+ years of kitchen or restaurant service experience, Serving it Right certification, and strong communication and delegation skills. A Food Safe certificate is an asset, and the role requires flexibility, standing for long periods, and lifting 50 pounds.

  Digital menu and item count systems

• 5d

  SMPA Technician

  North Vancouver, BC

  Part Time

  

  Capilano University

  1+ YOECandidates need a two-year diploma in a related field and one year of film production equipment experience, including inventory control. A valid Class 5 driver's licence is required, along with strong organizational, customer service and MS Office skills.

  Rentalworks, MS Office, Film cameras, Lighting equipment, Grip and electrical equipment, Genie lift

  5d

  SMPA Technician

  North Vancouver, BC

  Part Time

  

  Capilano University

  1+ YOECandidates need a two-year diploma in a related field and one year of work experience with film production equipment and inventory control. A valid Class 5 driver's licence is required, along with strong organizational skills, good customer service and working knowledge of MS Office and database systems.

  Rentalworks, MS Office, cameras, lighting equipment, grip and electrical equipment, Genie lift

• 5d

  On-Call Custodian

  Vancouver, BC

  $22/hrPart Time

  TC

  Tenth Church

  Tenth Church needs candidates with a high school diploma or GED, custodial or groundskeeping experience preferred, and the ability to lift up to 40 pounds. A valid criminal record check with vulnerable sector screening is required, and WHMIS training is preferred.

  cleaning equipment, mop, vacuum

• 5d

  Restaurant Kitchen Manager

  Surrey, BC

  RR

  Red Robin Canada

  Candidates need experience as a Kitchen Manager, Sous Chef, or senior kitchen leader in a high-volume, full-service restaurant. FoodSafe Level 1 is required (Level 2 is an asset), along with availability for days, evenings, weekends, and holidays.

  Inventory systems, Kitchen scheduling tools

• 5d

  Mayo Foods Manager (NOC 60020)

  Mayo, YT

  Full Time

  NC

  Na Cho Nyak Dun Development Corporation

  1+ YOECandidates need retail or store management experience, strong leadership and financial skills, and the ability to handle the challenges of a remote northern grocery operation. Cultural sensitivity and an understanding of food security in the region are expected.

  POS, SMS

• 5d

  Service Coordination Supervisor

  Winnipeg, MB

  Full Time

  

  Black & McDonald Limited: Black & McDonald is an integrated, multi-trade service provider that safely delivers high-quality construction, facilities management, and technical…

  3+ YOEBlack & McDonald Limited needs candidates with 3-5 years of experience in service coordination, dispatch, administration or operations support, strong Microsoft Office skills, and excellent communication. Experience with ERP or work order systems, supervisory experience and facility services knowledge are assets.

  Microsoft Office, Outlook, Excel, Word, Teams, JD Edwards

• 5d

  Trade, Mill Welder (Mount Milligan)

  Fort St. James, BC

  $59.87/hrFull Time

  

  Centerra Gold

  3+ YOECandidates need welding certification, with a Red Seal preferred, and a valid Class 5 driver's licence. Three or more years of welding and fabrication experience is preferred, along with the ability to read drawings and provide their own tools.

  Welding equipment, Gouging equipment, SAP, Microsoft Office

  5d

  Trade, Mill Electrician (Mount Milligan)

  Fort St. James, BC

  $59.87/hrFull Time

  

  Centerra Gold

  3+ YOECandidates need an Interprovincial Red Seal Industrial Electrician certification, a valid Class 5 driver's licence, and knowledge of the Canadian Electrical Code. Three or more years of mining, milling or heavy industrial electrical experience is preferred, along with the ability to read electrical drawings and strong safety commitment.

  SAP, Microsoft Word, Microsoft Excel, Microsoft Outlook

  5d

  Supervisor, Mine Maintenance - Shovel and Drill (Mount Milligan)

  Fort St. James, BC

  $120k–$145k/yrFull Time

  

  Centerra Gold

  5+ YOE5+ MgmtCandidates need a heavy-duty equipment technician background with a Red Seal, a BC Mine Supervisor Certificate or willingness to get one, a Class 5 licence, and 5 to 8 years of heavy equipment maintenance experience. At least 5 years of supervisory experience and hands-on work with P&H, Komatsu, Epiroc or Sandvik equipment are required.

  SAP, Microsoft Office, P&H shovels, Komatsu shovels, Caterpillar shovels, Epiroc blasthole drills

10 companies