“Process control instruments” jobs in Canada – Page 37

No matching filters. Try another name.

Results

• 18d

  Electrical Engineer (Controls and Infrastructure)

  Richmond, BC

  

  General Fusion Inc

  5+ YOECandidates need a bachelor's degree in electrical engineering, P.Eng. registration or eligibility with EGBC, and 5+ years designing and commissioning control systems. Strong panel wiring, PLC programming in IEC 61131-3 languages, knowledge of the Canadian Electrical Code and CSA panel standards, and grounding and noise practices are required.

  Beckhoff TwinCAT, PLC, multimeter, insulation resistance tester, oscilloscope, AutoCAD Electrical

• 18d

  CNC Machinist (Rotating Shift)

  Hamilton, ON

  $65k–$82k/yrOn-siteFull Time

  

  Smiths Group

  5+ YOEJohn Crane needs a candidate with hands-on CNC milling or turning experience, the ability to read blueprints and G-code, and a high school diploma plus two years of technical training. Over five years of related experience and Red Seal or equivalent are also listed, along with the ability to work loud plant-floor conditions wearing PPE.

  CNC mill, vernier calliper, CMM, Mazak, Okuma, Haas

• 18d

  Embedded Systems Software Developer

  Cambridge, ON

  TI

  Tigercat Industries

  Candidates need a bachelor's degree in computer science, electrical or computer engineering, or a related field, plus proven C/C++ embedded firmware experience. Real-time systems, problem-solving and strong teamwork skills are also required.

  Linux, C#, .NET, GUI test tools

  18d

  Custom Machinist

  Brant, ON

  TI

  Tigercat Industries

  Candidates need a machinist licence and hands-on experience with Heidenhain, Fanuc and Mastercam control systems, plus SolidWorks. They must be skilled with micrometers and calipers and comfortable with physical work.

  Mastercam, SolidWorks, CNC mills, CNC lathes, 5-axis machines, cranes

  18d

  Brake Press Operator

  Brant, ON

  TI

  Tigercat Industries

  Candidates need experience operating metalworking machines, with brake press experience preferred. They must be able to read blueprints, diagrams and engineering drawings, use measuring tools, troubleshoot problems, and handle physical work such as standing for long periods and lifting up to 50 pounds.

  brake press, shears, power presses, saws, plate rolls, drills

  18d

  Custom Machinist

  Cambridge, ON

  TI

  Tigercat Industries

  Candidates need a Licensed Machinist credential and experience programming CNC equipment with Heidenhain, Mastercam and Fanuc controls. They also need SolidWorks skills and proficiency with precision measuring tools.

  SolidWorks, Mastercam, Heidenhain, Fanuc, CNC mill, CNC lathe

• 18d

  Custom Machinist

  Cambridge, ON

  MS

  MacDonald Steel

  Candidates need a licensed machinist background with Heidenhain, Mastercam and Fanuc control experience, plus SolidWorks skills and proficiency with precision measuring tools. Strength for lifting and moving parts and the ability to troubleshoot equipment are also needed.

  SolidWorks, Mastercam, CNC mill, CNC lathe, 5-axis machine, horizontal boring mill

• 18d

  Cnc operator

  Saint-Laurent, QC

  $25–$29/hrFull Time

  

  Randstad Canada

  3+ YOERandstad Canada needs candidates with a vocational diploma in CNC machining or equivalent training, plus 3 to 5 years of precision machining experience on numerically controlled equipment. Candidates also need strong attention to detail, basic math skills, and English communication for reading blueprints.

  laser cutting equipment, micrometers, calipers, precision measuring instruments

• 18d

  Engineering Designer, Water - Niagara

  St. Catharines, ON

  

  R.V. Anderson Associates Limited: Anderson Associates Limited (RVA) is a proudly 100% Canadian, employee-owned firm with an award-winning culture.

  Candidates need an engineering degree in environmental, chemical or civil engineering, with an interest in water projects. Strong written and spoken English, Microsoft Office skills and a valid driver's licence are required; experience in water systems or site review is an asset.

  Biowin, Microsoft Office

• 18d

  Ingénieur·e DevOps

  Montréal, QC

  

  Hasbro: Hasbro is a leading games, IP and toy company whose mission is to create joy and community through the magic of play.

  Expérience SRE sur systèmes de production AWS; Expérience avec AWS CDK et l'infrastructure en tant que code; Expérience des pipelines CI/CD pour services conteneurisés

  AWS CDK, GitLab CI, Datadog, OpenTelemetry, PostgreSQL, Aurora

• 18d

  Quality Control Chemist

  Windsor, NS

  $50k–$78k/yrFull Time

  

  BioVectra Inc.

  Candidates need a chemical technology diploma and lab instrument experience with GC, HPLC or UV-VIS. A chemistry or biochemistry degree is preferred, and cGMP knowledge is an asset.

  HPLC, GC, PCR, Plate reader, ELISA, Spreadsheets

• 18d

  Research Technician II

  Guelph, ON

  UO

  University of Guelph

  Candidates need 2 to 3 years of post-secondary education including a molecular biology lab course, plus some practical lab experience. Strong attention to detail, computer skills and WHMIS awareness are also needed.

  Biomek Liquid Handling robots, LIMS, MS SharePoint, MS Office

• 18d

  Senior Process Engineer – Chemical Manufacturing

  Ontario

  Full Time

  EC

  Entegris Canada Ltd.

  5+ YOECandidates need a chemical engineering bachelor's degree or an advanced science degree, plus 5+ years in chemical manufacturing or process engineering. Experience with statistical tools (SPC, DOE, Minitab or JMP), Lean and Six Sigma, regulated quality systems, and Aspen, AutoCAD, PFDs and P&IDs is required.

  Aspen, AutoCAD, Minitab, JMP

• 18d

  Network Engineer

  Mississauga, ON

  

  OSL Retail Services Inc

  5+ YOECandidates need 5+ years of experience building and supporting complex enterprise network and security environments. They need deep Fortinet expertise, strong routing and switching knowledge, and hands-on Azure networking, and a Fortinet certification (FCP or FCSS) is strongly preferred.

  FortiGate, FortiManager, FortiAnalyzer, FortiClient EMS, FortiSwitch, FortiAP

• 18d

  I&C and Telecom Supervisor

  Calgary, AB

  Full Time

  K

  Kent

  15+ YOEKent needs a candidate with a bachelor's degree or diploma in an engineering discipline, a P.Eng., and 15+ years of I&C experience in energy or industrial sectors. Strong leadership, planning, communication and knowledge of CSA, ISA, IEC and NEC/CEC standards are also required.

  Engineering design software, Document management systems

• 18d

  Electrical Journeyperson - Adhoc

  St. John's, NL

  On-siteFull Time

  W

  Wood

  Candidates need a Journeyperson Certificate (or a Red Seal) and industrial electrical experience, plus a Fall Arrest Certificate for work at heights. Offshore certificates such as BST, H2S Alive and Confined Space Entry are an asset.

  ohmmeter, oscilloscope, hand tools, power tools, conduit benders, pipe threader

• 18d

  Staff Engineer, Site Reliability Engineering

  Markham, ON

  HybridFull Time

  GO

  GM of Canada Company

  8+ YOECandidates need 8+ years in SRE, DevOps, or systems engineering, with cloud-native production experience, strong observability and CI/CD skills, and solid programming ability in Python, Go, or Java. A relevant technical degree (BS, MS, or PhD) is required, along with strong communication skills.

  Azure Databricks, Azure Event Hubs, Azure Kubernetes Service, Terraform, Helm, Kustomize

• 18d

  Associate Staff Research Scientist

  Concord, ON

  Full Time

  AS

  AB Sciex LP

  10+ YOECandidates need a minimum M.Sc. in a field such as Biology, Chemistry or Mathematics (Ph.D. preferred), more than 10 years of mass spectrometry experience, and a publication and research record applying MS to life science, pharma, food or forensics problems. Experience with AI or ML and patents is an asset.

  Research, Biotechnology, Process improvement, Mass spectrometry, Workflow, Software development

• 18d

  Lead Optics Engineer

  Cambridge, ON +1

  $130k–$180k/yrOn-siteFull Time

  

  Aerospace: Aerospace’s national workforce of more than 4,600 employees provides objective technical expertise and thought leadership to solve the hardest…

  8+ YOECandidates need a bachelor's degree in science or engineering, 8+ years in optical design, test and systems engineering for aerospace, and 3+ years of optical simulation with tools like Zemax or Code-V. Eligibility for Controlled Goods Program and Contract Security Program clearances is required.

  Zemax, Code-V, Matlab, interferometer, integrating sphere, spectrometer

• 18d

  Instrumentation Technician

  Canada

  

  Cameco: Cameco is a global nuclear energy company.

  3+ YOECandidates need an interprovincial Red Seal or Saskatchewan journeyperson industrial instrumentation certificate and three to five years of industrial or mine experience. They should be able to work in a team and on a rotation schedule with air commuting.

  DCS, PLC, Foxboro DCS, SAP, flowmeters, pH transmitters

• 18d

  Apprentice, Instrument Mechanic

  Trail, BC

  On-siteFull Time

  T

  Teck

  Candidates need Grade 12 completion, at least pre-apprentice standing as an Instrument Mechanic, and WHIMIS certification. Experience in an industrial setting, a valid driver's licence and safe use of hand tools are also needed, with Foxboro, ABB, Modicon PLC and Wonderware HMI knowledge as assets.

  Foxboro, ABB systems, Modicon PLC, Wonderware HMI, basic hand tools

• 18d

  Building Automation Systems (BAS) Manager

  Ottawa, ON

  On-siteFull Time

  CA

  CAN ASA-Jones Lang LaSalle Real Estate Services, Inc.

  5+ YOECandidates need 5+ years of building automation or controls experience with technical leadership, expert knowledge of platforms such as Johnson Controls, Honeywell, Siemens or Schneider Electric, and HVAC and control theory skills. A bachelor's degree in an engineering or building automation field and certifications such as CEM, BACP or CAP are preferred.

  Johnson Controls, Honeywell, Siemens, Schneider Electric, Tridium

• 18d

  Quality Control Supervisor

  Canada

  Full Time

  MM

  MIC Metal Improvement Co LLC

  1+ YOE1+ MgmtCandidates need aerospace experience, supervisory experience and a technical diploma or degree. Knowledge of NADCAP, AS9100, GD&T and corrective action systems is required, and NADCAP audit or shot peening experience is preferred.

  MS Office Suite

• 18d

  Quality Technician Co-op

  Cambridge, ON

  $22–$26/hr

  

  Eclipse Automation

  Eclipse Automation needs candidates enrolled in college QA/QC or a related discipline, or with relevant experience. Good arithmetic, mechanical aptitude, and working knowledge of Microsoft Excel and Word are required or desired.

  calipers, micrometers, height gauges, dial indicators, Microsoft Excel, Microsoft Word

21 companies