“ultrasonic testing” jobs in Canada

No matching filters. Try another name.

Results

• 3d

  Guided Wave Ultrasonic Testing (GWUT) Technician

  Alberta

  Full Time

  

  Echo NDE: Echo NDE is a dynamic company based in Red Deer, Alberta, providing a full suite of non-destructive testing, inspection and integrity services…

  2+ YOECandidates need CGSB UT Level 2 certification and at least 2 years of NDT experience. Experience with Eddyfi GWUT systems is preferred, and the ability to travel is required.

  Eddyfi GWUT systems, GUL systems, MsS systems

  3d

  Guided Wave Ultrasonic Testing (GWUT) Technician

  Alberta

  

  Echo NDE: Echo NDE is a dynamic company based in Red Deer, Alberta, providing a full suite of non-destructive testing, inspection and integrity services…

  2+ YOECandidates need CGSB UT Level 2 certification and at least 2 years of relevant NDT experience. Hands-on Eddyfi GWUT experience, MT/PT Level 2, CSWIP GWUT Level I and IRATA rope access are assets, and travel is required.

  Eddyfi GWUT systems, GUL, MsS

  20h

  NDT Technician - UT

  Grande Prairie, AB

  

  Echo NDE: Echo NDE is a dynamic company based in Red Deer, Alberta, providing a full suite of non-destructive testing, inspection and integrity services…

  Echo NDE asks for a CGSB Ultrasonic Testing UT1 certification, strong analytical and safety awareness, and clear English communication. Candidates also need to pass a vision and colour test and hold a valid class 5 driver's licence with a clean record.

  Ultrasonic testing equipment

  21h

  NDT Technician - UT

  Grande Prairie, AB

  Full Time

  

  Echo NDE: Echo NDE is a dynamic company based in Red Deer, Alberta, providing a full suite of non-destructive testing, inspection and integrity services…

  Candidates need a CGSB UT1 ultrasonic testing certification, with other CGSB certifications considered an asset. They must have strong analytical skills, attention to detail, safety and quality awareness, clear English communication, a passed vision and colour test, and a valid class 5 licence with a clean driving record.

  Ultrasonic testing equipment

  3d

  Phased Array Technician

  Alberta

  Full Time

  

  Echo NDE: Echo NDE is a dynamic company based in Red Deer, Alberta, providing a full suite of non-destructive testing, inspection and integrity services…

  2+ YOECandidates need valid CGSB or PCN PAUT certification, CGSB UT Level 2, and proven ASME vessel and piping experience with at least 2 years of advanced UT work. MT or PT Level 2 and IRATA rope access are assets.

  Phased array ultrasonic equipment

  3d

  Phased Array Technician

  Alberta

  

  Echo NDE: Echo NDE is a dynamic company based in Red Deer, Alberta, providing a full suite of non-destructive testing, inspection and integrity services…

  2+ YOECandidates need valid CGSB or PCN PAUT certification and at least 2 years of advanced UT experience. Proven ASME code work on vessels and piping is also required.

  PAUT equipment, Ultrasonic testing equipment

• 17h

  Mechanical Engineer, R&D Instrumentation

  Burnaby, BC

  Full Time

  SS

  STICA STEMCELL Technologies Canada Inc.

  3+ YOECandidates need an engineering degree, 3+ years of relevant experience, and 3+ injection molding projects with external suppliers. Strong knowledge of plastics processing and assembly, plus strong communication skills, are required.

• 17h

  Summer Student, Asset Integrity

  Calgary, AB

  Full Time

  PE

  PETRONAS Energy Canada Ltd.

  Candidates need to be enrolled in a Canadian undergraduate program in Mechanical, Materials Science or Petroleum Engineering, in 3rd or 4th year. Strong communication, time and data management skills and a self-driven approach are needed; knowledge of materials, corrosion or data science is an asset.

  Ultrasonic thickness testing equipment

• 2d

  Manufacturing Technician

  Burnaby, BC +1

  $25–$33/hrOn-siteFull Time

  DT

  DarkVision Technologies

  Candidates need hands-on product assembly or mechanical/electronics experience, soldering experience, and the ability to read mechanical drawings, schematics and wiring diagrams. A technical certificate or diploma, QC experience, microscope soldering and electronic test equipment skills are preferred.

  Soldering iron, Microscope, Electronic testing equipment, Test jigs, Heated pressure vessel

  4d

  Field Deployment Specialist - Canada

  Calgary, AB

  On-siteFull Time

  DT

  DarkVision Technologies

  Candidates need experience deploying logging technologies by wireline, tractor, coil or similar methods, and must be able and willing to travel extensively and spend long periods in the field. Oilfield service experience, a technical or engineering background, and strong communication skills are assets.

  Wireline, Tractor deployment systems

  6d

  Applications Engineer

  North Vancouver, BC

  On-siteFull Time

  DT

  DarkVision Technologies

  3+ YOECandidates need 3+ years in an applications or test engineering role and a Bachelor's degree in Mechanical or Materials Engineering. Strong written and verbal communication, meticulous organization, and the ability to work with limited supervision are required.

  Jira, Data analysis software

  11d

  Mechanical Engineer

  North Vancouver, BC

  On-siteFull Time

  DT

  DarkVision Technologies

  2+ YOECandidates need a university degree in Mechanical, Mechatronics or Engineering Physics, at least 2 years of mechanical design experience, CAD skills, and hands-on prototype experience. Experience with high pressure and temperature systems, sealing, and programming tools is an asset.

  SolidWorks, Inventor, Fusion 360, Creo, MATLAB, Python

• 2d

  NDT Engineer

  Mississauga, ON

  H

  Hatch

  3+ YOECandidates need a university degree in physics or engineering and 3 to 5 years of NDT engineering experience. Knowledge of acoustic emission, ultrasonic and stress wave methods, strong signal processing and proposal and report writing skills are needed.

  Acoustic emission monitoring equipment

• 2d

  Fredericton Medical Device Reprocessing Technician Coordinator (2066) PCN 1152233

  New Brunswick

  Full Time

  

  Horizon Health Network

  2+ YOECandidates need high school graduation or GED, CSA certification in Medical Device Reprocessing, and at least two years of MDR experience including Operating Room instrumentation. Supervisory skills, strong computer skills and clear verbal and written communication are also required.

  Meditech, ORSOS Computer System, Kronos/Dimensions, Microsoft Excel, Microsoft Word, Outlook

• 4d

  Quality Control Inspector

  Grande Prairie, AB

  On-siteFull Time

  

  FLINT Corp.: FLINT is a leading provider for Maintenance & Turnarounds, Wear Technologies, Fabrication, Modularization & Machining, Facility Construction,…

  Candidates need prior quality control experience in oil and gas, structural, or industrial fabrication, plus CWB Level 1 certification. They also need knowledge of welding, inspection techniques and applicable codes, strong Bluebeam skills, and good English communication.

  Bluebeam

• 5d

  Agent de qualité Tests non destructifs (NDT) / Quality Agent Non-Destructive Tests (NDT)

  Montréal, QC

  Full Time

  AC

  Airbus Canada Limited Partnership

  Candidates need a DEC or AEC in NDT or a related technical field, or equivalent, plus Level 2 NDT certification (NAS410 or EN4179) in UT or ET, with PT completed or in progress. Aerospace experience, knowledge of aerospace structures and materials, and fluent French and English are strong assets.

  Liquid penetrant materials

• 8d

  First Line Manager, Quality NDE (Temporary/Term)

  Ontario

  Full Time

  BB

  BPLP Bruce Power L.P.

  8+ YOECandidates need about 8 years of experience in quality control, surveillance, pressure boundary or NDE inspection, plus CGSB Radiography Level II, which is a stated focus area. Familiarity with ASME, ASNT and CSA standards and with nuclear station systems and operations is also required.

  radiography equipment, remotely operated inspection equipment, remote data logging equipment, data processing equipment

• 9d

  Medical Device Reprocessing Technician

  Edmonton, AB

  

  Groupe Vision

  Candidates need a recognized Sterile Processing Technician certificate or Medical Device Reprocessing course, with current CSA or IACHSMM/HSPA certification. They also need attention to detail, good judgment, the physical ability for the work, and an interest in health care.

  Stay alert, Customer service, Patient care

• 9d

  Medical Device Reprocessing Technician

  Edmonton, AB

  Full Time

  

  LASIK MD: LASIK MD is a leading provider of laser vision correction, with over 40 locations in Canada.

  Candidates need a recognized Sterile Processing Technician certificate or Medical Device Reprocessing (MDR) course with current CSA or IAHCSMM/HSPA certification. They also need attention to detail, good judgment, the physical ability to do the work, and an interest in health services. Medical office, customer service, or patient care experience is an asset.

  Stay alert, Customer service, Patient care

• 10d

  Advisor, reliability

  Dease Lake, BC

  $85k–$114k/yr

  NG

  Newmont Goldcorp Canada

  5+ YOECandidates need a bachelor's degree in an engineering discipline, or equivalent experience, plus at least 5 years in mining or heavy industry. Strong reliability, maintenance planning and analytical skills are required, with SAP and asset analysis tools; condition monitoring knowledge is an asset.

  SAP, CMMS, vibration analysis equipment, oil analysis, thermography, ultrasonic testing

• 10d

  Senior Engineer, Reliability

  Logan Lake, BC

  $122k–$150k/yrOn-siteFull Time

  T

  Teck

  7+ YOECandidates need a mechanical engineering degree and P.Eng. registration or eligibility with EGBC, plus 7+ years in reliability or maintenance engineering. Strong knowledge of RCA, condition monitoring, RCM and FMEA, and experience with mining equipment and CMMS systems such as Maximo or SAP are required.

  Maximo, SAP, Microsoft Office Suite

• 10d

  Advisor, Reliability

  Dease Lake, BC

  $85k–$114k/yrFull Time

  

  Newmont Mining Corporation: Newmont is the world’s leading gold company and a producer of copper, silver, zinc and lead.

  5+ YOECandidates need a bachelor's degree in an engineering discipline (or equivalent experience) and at least 5 years in mining or heavy industry. Newmont requires reliability or asset management experience, strong analytical skills, and SAP and asset analysis tool proficiency; condition monitoring knowledge is an asset.

  SAP, CMMS, vibration analysis equipment, ultrasonic testing equipment

• 10d

  NDT Inspector

  Brantford, ON

  Full Time

  

  H2R Business Solutions

  Candidates need CGSB Level II certification in UT, MT, PT and VT plus proven NDT experience. They must read blueprints and quality documents, communicate clearly and work independently.

  overhead crane, forklift

• 11d

  Non-Destructive Testing Controller

  Mirabel, QC

  

  L3Harris Technologies

  Candidates need a college certificate in non-destructive testing or an equivalent, a CGSB Level 2 certification, and Level II competency in at least one inspection method. They must also be eligible for Controlled Goods Program registration and a Canadian government Reliability status and Secret Level 2 / NATO Secret clearance.

  Non-destructive testing, Perform liquid penetrant tests, Inspection

16 companies