“Run simulations” jobs in Canada – Page 13

No matching filters. Try another name.

Results

• 1mo

  Principal SI/PI Engineer - 18619

  Mississauga, ON

  S

  Synopsys

  12+ YOECandidates need a bachelor's degree (master's or PhD preferred) in electrical engineering and 12+ years of high-speed SI/PI experience on SerDes links. They also need strong skills in simulation tools, lab measurement and scripting, plus proven technical leadership.

  HSPICE, Keysight ADS, SystemVue, Ansys HFSS, SIwave, AEDT

  1mo

  Principal Digital Verification Engineer

  Nepean, ON

  S

  Synopsys

  12+ YOESynopsys candidates need 12+ years of verification experience with a BSc, 10+ years with an MSc, or 8+ years with a PhD. They need deep SystemVerilog and UVM skills, simulation and waveform debugging, C knowledge, assertion-based verification, and Linux scripting. Experience with LPDDR5/5X or LPDDR6 and emulation platforms is a plus.

  SystemVerilog, UVM, waveform debugger, Linux, source control, emulation platform

  1mo

  Silicon Validation Engineer

  Mississauga, ON

  S

  Synopsys

  6+ YOECandidates need a Master's in electrical or electronics engineering with 6+ years of post-silicon validation experience, or a Bachelor's with 7+ years. Hands-on lab skill with BERTs, oscilloscopes, VNAs and TDRs, plus MATLAB and Python, is required.

  BERT, real-time oscilloscope, sampling oscilloscope, VNA, TDR, MATLAB

  1mo

  Senior Staff Hardware Validation Engineer

  Mississauga, ON

  S

  Synopsys

  6+ YOESynopsys needs a bachelor's degree in electrical or electronic engineering with 8 years of relevant experience, or a master's with 6 years. Candidates need lab test equipment experience, PCB fabrication house experience and skill running PI and SI simulations.

  HFSS, high-speed scopes, power meters, IR cameras, FPGA development tools, Verilog HDL

  1mo

  Hardware Validation Senior Engineering Manager

  Mississauga, ON

  S

  Synopsys

  10+ YOE3+ MgmtCandidates need a bachelor's degree in electrical or electronics engineering with 10+ years of experience, or a master's with 8+ years. They must have 3+ years managing engineers, full PCB design experience, and skill with signal simulation tools such as HFSS or ADS.

  HFSS, ADS, oscilloscope, spectrum analyzer, power meter, thermal camera

  1mo

  System Level Test Engineer - 18758

  Ottawa, ON

  S

  Synopsys

  3+ YOECandidates need a bachelor's or master's degree in electrical or computer engineering or a related field, plus 3 to 5 years of silicon validation or memory interface lab debug. They need hands-on bring-up experience, DRAM protocol knowledge, and Python scripting skills.

  oscilloscope, logic analyzer, protocol analyzer, BERT, VNA, Power Analyzer

  1mo

  Silicon Validation/Characterization Engineer - 18757

  Nepean, ON

  S

  Synopsys

  3+ YOECandidates need a Bachelor's or Master's in electrical or computer engineering or a related field, plus 3+ years of semiconductor validation or characterization experience. They need knowledge of DDR/LPDDR/HBM protocols and lab instruments, and skill in Python or C/C++ scripting.

  oscilloscope, logic analyzer, power analyzer, SMU, pattern generator, Automated Test Equipment (ATE)

  1mo

  Sr Staff PCB Design Engineer

  Markham, ON

  S

  Synopsys

  10+ YOECandidates need 10+ years of high-speed PCB design or signal integrity experience and strong circuit and transmission line theory. They also need hands-on 3D electromagnetic modelling experience with Ansys HFSS or similar tools, plus a Bachelor's degree in electrical or electronics engineering.

  Ansys HFSS, PCB layout tools, Windows, Linux

• 1mo

  BIM Specialists

  Ottawa, ON

  $20–$25/hrHybridContract

  IS

  Innovation Seven

  1+ YOECandidates need 1 to 3 years of Revit experience (2018 to 2022 versions), a solid grasp of BIM workflows and 3D modelling, and the ability to pass a Revit online test. Enhanced Reliability security clearance is also required.

  Revit, AutoCAD, Microsoft Office

• 1mo

  Senior Process Engineer

  Surrey, BC

  $90–$100/hr

  

  Actalent: Actalent is an operating company of Allegis Group, the global leader in talent solutions.

  7+ YOE2+ MgmtCandidates need 7 to 10 or more years of process engineering experience in LNG, natural gas or RNG, client-facing experience, and 2 or more years leading a team. A P.Eng and Hysys proficiency are required.

  Hysys, AspenTech

• 1mo

  Operations Research Analyst

  Ottawa, ON

  

  Caivan

  Candidates need proven experience building quantitative models that an operation actually used, a degree in operations research, industrial engineering, applied mathematics or a similar quantitative field, and proficiency in Python and SQL. They must explain models clearly to operators and executives.

  Python, SQL, Excel, Gurobi, CPLEX, OR-Tools

• 1mo

  Emergency Medicine

  Terrace, BC

  ?

  Qualifications, Education and Skills; Advanced Cardiovascular Life Support (ACLS) Mandatory Advanced Trauma Life Support (ATLS) Mandatory Current College of Physicians and Surgeons of British Columbia (CPSBC) License…;…

  Emergency medicine, ACLS, PALS, General medicine, General surgery, Plastic surgery

• 1mo

  Emergency Medicine

  Terrace, BC

  ?

  Qualifications, Education and Skills; Advanced Cardiovascular Life Support (ACLS) Mandatory Advanced Trauma Life Support (ATLS) Mandatory Current College of Physicians and Surgeons of British Columbia (CPSBC) License…;…

  Emergency medicine, ACLS, PALS, General medicine, General surgery, Plastic surgery

• 1mo

  Family Practitioner/General Practitioner — Anesthesiology

  Vanderhoof, BC

  ?

  Qualifications, Education and Skills; Advanced Cardiovascular Life Support (ACLS) Desired Anesthesia Mandatory Advanced Trauma Life Support (ATLS) Desired Current College of Physicians and Surgeons of British Columbia…

  ACLS, PALS, Primary care, General surgery, Patient care, Mental health

• 1mo

  Emergency Medicine

  Terrace, BC

  ?

  Qualifications, Education and Skills; Advanced Cardiovascular Life Support (ACLS) Mandatory Advanced Trauma Life Support (ATLS) Mandatory Current College of Physicians and Surgeons of British Columbia (CPSBC) License…;…

  Emergency medicine, ACLS, PALS, General medicine, General surgery, Plastic surgery

• 1mo

  Family Practitioner/General Practitioner — Anesthesiology

  Vanderhoof, BC

  ?

  Qualifications, Education and Skills; Advanced Cardiovascular Life Support (ACLS) Desired Anesthesia Mandatory Advanced Trauma Life Support (ATLS) Desired Current College of Physicians and Surgeons of British Columbia…

  ACLS, PALS, Primary care, General surgery, Patient care, Recruitment

• 1mo

  Family Practitioner/General Practitioner — Anesthesiology

  Vanderhoof, BC

  ?

  Qualifications, Education and Skills; Advanced Cardiovascular Life Support (ACLS) Desired Anesthesia Mandatory Advanced Trauma Life Support (ATLS) Desired Current College of Physicians and Surgeons of British Columbia…

  ACLS, PALS, Primary care, General surgery, Patient care, Mental health

• 1mo

  Applied Research Intern, Proactive Intelligence & Customer World Models (PhD / Graduate Co-op)

  Toronto, ON

  

  Block: Block Law is a results-driven law firm dedicated to representing individuals who have been seriously injured or are living in uninhabitable housing…

  Block needs candidates currently enrolled in an MS or PhD in computer science, machine learning, statistics, mathematics, operations research, or a related field who will return after the co-op. They need solid deep learning foundations, Python and PyTorch or JAX skills, and a record of independent research such as publications or open-source work.

  PyTorch, JAX, Python

• 1mo

  Performance Engineer

  Mississauga, ON

  $57.90–$65.14/hrContract

  

  Randstad Canada

  Candidates need hands-on experience leading enterprise performance testing, advanced JMeter scripting and Dynatrace diagnostics. They also need knowledge of NFRs and distributed architectures, plus strong communication skills.

  JMeter, Dynatrace

• 1mo

  Student-Factory Planning, AI & Simulation

  St. Thomas, ON

  PS

  PowerCo SE: Founded by the Volkswagen Group in 2022, PowerCo is a globally operating battery cell manufacturer with a strong commitment to sustainability.

  Candidates need to be enrolled in a Canadian engineering or related bachelor's program, with strong analytical skills and Microsoft Office proficiency. Exposure to simulation, CAD or BIM tools and interest in AI or digital manufacturing are assets.

  Siemens Plant Simulation, Navisworks, Revit, AutoCAD, Microsoft Excel, Microsoft PowerPoint

• 1mo

  Data Science Intern, Algorithms (Summer 2027 - Toronto)

  Toronto, ON

  $45–$48/hr

  L

  Lyft

  Candidates need to be enrolled in a Masters or PhD program in a Canadian university, graduating between December 2027 and June 2028, and available for Summer 2027 in Toronto. They need Python (or SQL/R), data science libraries like NumPy and Scikit-learn, and experience in experimental design and exploratory data analysis.

  Python, NumPy, Scikit-learn, PyTorch, TensorFlow, Keras

• 1mo

  Junior Quant Developer

  Montréal, QC

  SC

  Squarepoint Capital

  4+ YOESquarepoint Capital needs candidates with a quantitative degree and up to 4 years of software or quant development experience. Candidates must know Python, C++, or KDB+/q, plus git and Linux, and be comfortable using AI tools in their workflow.

  Python, C++, KDB+/q, git, Linux, SQL

• 1mo

  Executive IC - Product

  Remote in Canada

  Remote

  

  hireVouch: Company Marketing Strategy

  Candidates need Founder, C-suite, VP, or Director-level experience leading teams at scale and building products people use. They also need sharp product instincts, a way of working built around AI, and a point of view on how AI changes building software.

  Interact with others

• 1mo

  CNC Programmer - Mechanical Engineering

  Ontario

  $20/hrContract, Temporary

  

  adecco

  1+ YOECandidates need a diploma or degree in Mechanical Engineering or a related technical field and 1 to 3 years of CNC programming, CAD/CAM or manufacturing experience. SolidWorks, CAM software and CNC machining experience are assets, and candidates must be legally eligible to work in Canada.

  SolidWorks, CAMWorks, CNC milling machine

12 companies