“structural schematics” jobs in Canada – Page 13

No matching filters. Try another name.

Results

• 28d

  Senior manager, facilities maintenance & operations

  New Westminster, BC

  $60.75–$87.33/hr

  

  Fraser Health Authority

  7+ YOE7+ MgmtCandidates need a Master's degree in Engineering or a related field, plus seven to ten years of recent progressive supervisory experience in a large unionized environment. Strong leadership, problem-solving, budgeting and technical writing skills are preferred.

  Microsoft Office, computerized maintenance management system

  29d

  Senior Manager, Facilities Maintenance & Operations

  New Westminster, BC

  $60.75–$87.33/hr

  

  Fraser Health Authority

  7+ YOE7+ MgmtFraser Health needs a master's degree in engineering or a related field and 7 to 10 years of recent progressive supervisory experience in a large, unionized environment. Candidates also need strong leadership, judgment, crisis-management and technical writing skills, plus knowledge of building systems and facilities finances.

  Microsoft Office, computerized maintenance management system

• 28d

  Neural Network Processing Firmware and Compiler Engineer

  Markham, ON

  On-siteFull Time

  

  Collabera

  3+ YOECandidates need commercial firmware experience in neural network processing or machine learning, plus compiler and optimization experience. Strong C/C++ skills and embedded multiprocessor experience are required, along with debugging skills using JTAG.

  JTAG, FPGA, Caffe, schematics

• 28d

  P&C Technician (Field Service)

  Calgary, AB

  Full Time

  GC

  Group CBS

  2+ YOECandidates need an associate technical degree or at least 2 years of P&C, project management or substation commissioning experience. They need basic electrical and relay knowledge, the ability to read wiring diagrams, and the ability to achieve NETA Level III or IV within 12 months.

  Relay test sets, Automated relay testing software, Microsoft Excel, Microsoft Word, Microsoft Outlook, SEL software

• 28d

  Diesel Mechanic

  Ontario

  Full Time

  C

  CPKC

  Candidates need a high school diploma or equivalent, a valid driver's licence and a Red Seal or Unifor Local 101R card. They must work all shifts and pass medical, vision, hearing and drug tests.

  overhead crane, mobile crane, forklift, hand tools

  28d

  Diesel Mechanic

  Moose Jaw, SK

  Full Time

  C

  CPKC

  Candidates need a high school diploma or equivalent, a valid driver's licence, and a Red Seal in a relevant trade or a Unifor Local 101R card. They must work all shifts in any weather, pass written exams in English, and communicate clearly.

  Overhead crane, Mobile crane, Forklift, Hand tools

• 28d

  Industrial Mechanic (Millwright)

  Toronto, ON

  Full Time

  

  Traction

  Candidates need to be a Journeyperson or a senior apprentice finishing their Red Seal requirements. They need strong mechanical knowledge of power transmission, fluid power and precision measurement, plus hand and power tool skill, physical stamina for confined and high-level work, and the ability to solve problems under pressure.

  hoists, jacks, laser alignment tools, lathe, grinder, milling machine

• 28d

  Field Service Technician, Electrical & Software Systems

  Toronto, ON

  $55k–$65k/yrOn-siteFull Time

  

  Able Innovations

  3+ YOECandidates need 3 to 6 years of field service or electromechanical experience and relevant technical education or equivalent practical experience. They must troubleshoot electrical and software faults, use diagnostic tools, do mechanical work and communicate well with healthcare clients.

  Multimeter, Oscilloscope, Diagnostic tools, Linux, Python, Bash

• 28d

  Industrial Red Seal Electrician

  Delta, BC

  $48/hr

  

  CRH

  Candidates need Red Seal electrical trade qualifications, knowledge of electrical safety, and the ability to read electrical schematics and blueprints. Working knowledge of three-phase motors, programmable controls and circuits is also needed, along with the ability to lift up to 50 lbs.

  hoist, crane, hand tools, power tools

• 29d

  Maintenance Technician I - UniFirst Canada

  Quebec

  Full Time

  

  UniFirst Corporation: Together with its subsidiaries, the Company also manages specialized garment programs for the cleanroom and nuclear industries.

  1+ YOEDES ou équivalent requis, diplôme technique un atout; Minimum de six mois d'expérience en réparation d'équipements industriels; Certification de Mécanicien(ne) de machines fixes 5e classe ou équivalent

  Hand and power tools, Precision measuring instruments, Electronic testing devices, CMMS (GMAO), Microsoft Office

• 29d

  Construction Trades: Carpentry, Formwork, Plumbing (multiple roles)

  British Columbia

  $19–$30/hrTemporary

  

  Lilwat Business Group

  Candidates need to be physically able to do manual labour outdoors in all weather, reliable and safety-focused, and able to read basic plans. Prior construction experience is preferred for formwork, and carpentry and plumbing apprentices need prior labour or trade experience or apprenticeship interest.

  hand tools, power tools, forklift, loader

• 29d

  Millwright- Continental Shift

  Woodbridge, ON

  $45.56/hrFull Time

  

  Westlake

  Candidates need a 433A Millwright certificate and strong troubleshooting skills with hydraulic and pneumatic systems. Blueprint reading, precision measuring and welding experience are needed, and weekend, shift and overtime work is required.

  Vernier calipers, micrometers, dial indicators, gauge blocks, lathe, milling machine

• 29d

  Journeyperson Electrician

  Calgary, AB

  On-siteFull Time

  

  HighLine Electrical

  Candidates need a Journeyperson Red Seal ticket and experience with streetlights, trenching and traffic signals. IMSA Traffic Signal certification and concrete pouring experience are considered assets.

  concrete, survey stakes

• 29d

  Electrical Design Technologist

  Langley, BC

  RemoteFull Time

  

  AWC Process Solutions Ltd.: AWC Water Solutions designs, manufactures, and integrates water and wastewater treatment systems for a variety of municipal and industrial…

  5+ YOECandidates need 5+ years of electrical design experience on industrial equipment and packaged systems, and 3+ years with AutoCAD Electrical. Knowledge of CEC, NEC or IEC standards is required, and a technical diploma or degree with CAD or electrical coursework is preferred.

  AutoCAD, AutoCAD Electrical

  29d

  Electrical Design Technologist

  Calgary, AB

  RemoteFull Time

  

  AWC Process Solutions Ltd.: AWC Water Solutions designs, manufactures, and integrates water and wastewater treatment systems for a variety of municipal and industrial…

  5+ YOECandidates need 5+ years of electrical design experience on industrial equipment and packaged systems, and 3+ years with AutoCAD Electrical. Knowledge of CEC, NEC or IEC standards is required, and a technical diploma or degree with CAD or electrical coursework is preferred.

  AutoCAD, AutoCAD Electrical

• 29d

  Bilingual Telecom Civil / Drafting Engineer

  Montréal, QC

  

  Staffmax

  6+ YOECandidates need 6 to 8 years of civil, structural or telecom infrastructure drafting experience and an OIQ Professional Engineering designation or eligibility. Strong written and verbal French is mandatory, along with knowledge of rooftop, tower and foundation detailing.

  Bilingualism, Communication skills, Technical drawings, Documentation, Collaborate with engineers, Regulatory compliance

  29d

  Bilingual Telecom Civil / Drafting Engineer

  Montréal, QC

  

  Staffmax

  6+ YOECandidates need 6 to 8 years in civil, structural or telecom infrastructure drafting, OIQ registration or eligibility, and fluent written and spoken French. Strong knowledge of telecom site layouts, rooftop installations, tower reinforcement and foundation detailing is required.

  Bilingualism, Communication skills, Technical drawings, Documentation, Collaborate with engineers, Regulatory compliance

• 29d

  Laboratory Technician - Building Envelope

  Toronto, ON

  $34.86/hr

  US

  UL Solutions

  2+ YOECandidates need a two- or three-year technology diploma in mechanical, civil or building engineering, plus at least 2 years of relevant work experience, ideally in a lab. They need strong mechanical and structural aptitude, strong computer and written communication skills, and the ability to lift heavy objects and work at heights.

  Forklift, Scissor lift, Telescopic boom, Roto telehandler, Hand tools, Power tools

• 29d

  Microwave pcb designer

  Sherbrooke, QC

  $82k–$95k/yrRemoteFull Time

  

  Nord Quantique: It provides a faster pathway to fault-tolerant quantum computing.

  Candidates need a university degree in electrical engineering or engineering physics and experience with microwave circuit design and high-frequency PCB layout. Hands-on use of VNAs and spectrum analyzers, and knowledge of signal integrity, are also required.

  VNA, Spectrum analyzer, Signal generator, ADS, AWR, HFSS

• 29d

  Installation Technician

  Richmond Hill, ON

  On-siteFull Time

  

  Umbrella: • Cloud Managed Networks: Provides comprehensive (full stack) cloud and network management solutions focusing on cybersecurity and maintenance,…

  Candidates need hands-on experience installing and troubleshooting network cabling and access control or video surveillance systems, and the ability to read technical drawings. A valid driver's licence and willingness to travel and work at heights are required.

  hand tools, ladders

• 29d

  Field Service Technician (Electrical)

  Hamilton, ON

  On-siteFull Time

  MS

  Manurep Sales Inc.

  3+ YOEManurep Sales Inc. needs candidates with an electrical engineering or PLC technology diploma or degree, 3+ years of industrial automation work, hands-on experience with Allen-Bradley, Siemens, or Omron controls, and skill building panels to UL standards. A valid passport and willingness to travel are also required.

  Allen-Bradley PLC, Siemens PLC, Omron PLC, HMI, UL control panel

• 29d

  Intégrateur.trice EWIS

  Montréal, QC

  

  SOGECLAIR

  10+ YOEBaccalauréat en génie aérospatial, mécanique ou électrique; 10 à 15 ans d'expérience en ingénierie aéronautique; Maîtrise de CATIA V5, ENOVIA et Microsoft Office

  CATIA V5, ENOVIA, NX, Teamcenter, Microsoft Office

• 29d

  Welder/ Fitter

  Toronto, ON

  $26/hrFull Time

  

  Job Bridge Global

  3+ YOECandidates need at least 3 years of MIG welding experience and must pass an in-house weld test for 1/16" to 3/8" material. A CWB weld ticket is preferred, and candidates must be able to lift up to 50 pounds regularly.

  MIG welder, wheel and die grinder, hand and power tools, measuring tape, jigs

• 29d

  Fire detection inspector

  Hamilton, ON

  $25.25–$33.59/hr

  JC

  Johnson Controls

  Candidates need a CFAA certification, a high school diploma or equivalent, and a valid full G driver's licence. Experience reading blueprints and diagrams, using hand tools and multimeters, and doing physical work at heights and in tight spaces is also required.

  laptop computer, hand tools

20 companies