“Advanced test instruments” jobs in Canada – Page 15

No matching filters. Try another name.

Results

• 16d

  Journeyperson Electrician Automation Specialist

  Lloydminster, AB

  Full Time

  CA

  (CAN) Apergy Canada ULC

  Candidates need a Red Seal Journeyperson Electrician certificate, a valid Class 5 driver's licence with an acceptable record, and industrial electrical experience with motor controls and VFD/VSD equipment. Oil and gas, artificial lift or field-service experience and knowledge of SCADA, PLCs and industrial communications are listed as minimum qualifications.

  SCADA, PLC, RTU, Sensia VSD, SMARTEN controllers

• 16d

  On-Site Laboratory Manager - Contract

  Edmonton, AB

  Full Time

  

  AGAT Laboratories

  3+ YOE3+ MgmtAGAT Laboratories needs a candidate with a chemistry degree, 3+ years of lab analysis work and 3+ years of supervisory experience. Strong knowledge of QA/QC, ISO/IEC 17025 accreditation and proficiency testing is required, and ICP-MS experience is an asset.

  ICP-MS, analytical instrumentation

  16d

  Laboratory Technician A - Air Quality GCMS

  Calgary, AB

  Full Time

  

  AGAT Laboratories

  2+ YOECandidates need a post-secondary technical diploma or science degree and hands-on GC/MS or GC/SCD instrument experience. Two or more years of lab work, Excel skills, mechanical aptitude and fluent English are needed.

  GC/MS, GC/SCD, Summa Canisters, Agilent Mass Hunter, Excel

• 16d

  Radiological Technologist - Royal Columbian Hospital

  New Westminster, BC

  $40.19–$50.20/hr

  

  Fraser Health Authority

  Fraser Health needs candidates with CAMRT certification and demonstrated knowledge of safe radiographic practices, PACS and Radiology Information Systems. Strong communication skills, CPR training and the physical ability to perform the duties are also required.

  PACS, Radiology Information System (RIS), radiographic equipment, computerized imaging equipment, medical device reprocessing

• 16d

  Plumber

  Kitchener, ON

  WR

  Waterloo Regional Health Network

  Candidates need Grade 12 or equivalent, a completed government apprenticeship or on-the-job training, and working knowledge of plumbing systems, HVAC and plumbing equipment. Knowledge of plumbing codes and the Ontario Occupational Health and Safety Act is preferred.

  small hand tools, drain pipe equipment, computerized work order system

• 16d

  Analytical Lab Technician

  Mississauga, ON

  $55k–$75k/yrOn-siteFull Time

  

  OTI Lumionics Inc.

  2+ YOECandidates need a post-secondary degree in analytical or organic chemistry and at least 2 years of industrial analytical lab experience. They must be comfortable working in full PPE, standing and walking for long periods, operating or learning forklifts, and working all shifts.

  NMR, HPLC, TGA, DSC, GC, forklift

• 16d

  QC Technician (maternity replacement)

  Knowlton, QC

  K

  kdc/one

  3+ YOECandidates need a college diploma in science or equivalent experience, at least three years in manufacturing production, basic computer skills and French and English bilingualism. A well-developed sense of smell and accurate colour vision are required, and the role is olfactory-tested.

  Good manufacturing practices, Documentation, Personal protective equipment, Regulatory compliance, MSDS, Quality control

  16d

  QC Technician

  Knowlton, QC

  K

  kdc/one

  3+ YOECandidates need a college diploma in science or equivalent experience, at least three years in manufacturing, basic computer skills and French and English bilingualism. The role also requires a strong sense of smell, accurate colour vision and good visual acuity.

  laboratory instruments, PPE, SDS, calibration equipment

• 16d

  Advanced Solution Engineering and Application Engineering Intern

  Boucherville, QC

  

  Dana Incorporated

  Candidates need to be final-year bachelor's or master's students in electrical engineering or equivalent. Knowledge of high-voltage electric motors and inverters, CANalyzer/CANoe, Python or test tools, and fluency in French and English are needed.

  CANalyzer, CANoe, Python, MS Office, JIRA, Confluence

• 16d

  Electronics Technologist

  Vancouver, BC

  Full Time

  

  TRIUMF

  7+ YOECandidates need an electronics engineering technology diploma and 7+ years of hands-on experience after it, with practical skills in electronics, instrumentation and PLC-based control systems. Strong troubleshooting, soldering, schematic reading and written and verbal communication are required, and Canadian citizenship or permanent residency is mandatory.

  PLC, HMI, Allen Bradley controllers, Rockwell Automation, Altium Designer, Microsoft Office

• 16d

  Laboratory Technician (Remote Mine Site) Assayer

  Ontario

  $27.40/hrOn-siteFull Time

  

  SGS

  Candidates need a high school diploma and 0-1 years of relevant experience, with a science-related diploma and 1-3 years of industrial or lab work preferred. Intermediate English, basic MS Office skills and the ability to work under pressure and lift up to 23 kg are required.

  Pipettes, Balances, Dispensers, MS Office

• 16d

  Electric Motor Repair/Rewind Technician

  Truro, NS

  

  Source Atlantic Limited

  Candidates need mechanical or electrical aptitude and an interest in hands-on work. Experience with motors and test equipment is an asset, and training is provided.

  electrical test equipment, test instruments

• 16d

  Registered Practical Nurse {CUPE MH-26-496}

  North Bay, ON

  Part Time

  NB

  North Bay Regional Health Centre

  Candidates need a current College of Nurses of Ontario registration, current BLS and medication and blood glucose certifications, and experience in medical clinical and dementia care. Advanced bilingual English and French is required, and a formal French test is given.

  RPN, Dementia care, BLS, Medication administration, Mental health, Communication skills

• 16d

  Pilot Plant Engineer

  Richmond, BC

  Full Time

  

  Saltworks Technologies

  1+ YOESaltworks Technologies needs a Chemical or Mechanical Engineering degree with 1-3 years of post-graduate industrial experience. Candidates need mechanical aptitude, troubleshooting skills, hands-on work with tools and lab equipment, a valid passport and no restrictions on international travel.

  industrial instruments, lab equipment, engineering drawings

  16d

  Senior Electrical Engineer

  Richmond, BC

  $100k–$130k/yrFull Time

  

  Saltworks Technologies

  5+ YOECandidates need a diploma or degree in electrical engineering technology, 5 to 8 years of industrial electrical experience, and strong English communication. Knowledge of Canadian Electrical Code, schematic reading, and EPLAN or AutoCAD Electrical is required or an asset.

  EPLAN, AutoCAD Electrical, AutoCAD

  16d

  Intermediate Electrical Engineer

  Richmond, BC

  $80k–$100k/yrFull Time

  

  Saltworks Technologies

  3+ YOESaltworks Technologies needs candidates with a diploma or degree in electrical engineering technology, 3 to 5 years of industrial electrical experience, and hands-on troubleshooting skills. They should read schematics well, know the Canadian Electrical Code, and be fluent in English. EPLAN or AutoCAD Electrical is an asset.

  EPLAN, AutoCAD Electrical, AutoCAD

• 16d

  Directeur(trice) de la Fabrication et de la Production | Director of Manufacturing & Production

  Montréal, QC

  On-siteFull Time

  AS

  Anyon Systems Inc.: Headquartered in Canada, with operations in Israel, Anyon is a full-stack superconducting quantum computing company designing, building, and…

  10+ YOE5+ MgmtDiplôme en ingénierie (mécanique, industrielle ou équivalent); Minimum 10 ans en production et 5 ans en gestion d’équipe; Maîtrise de SolidWorks et expérience ERP/MRP

  SolidWorks, ERP, MRP

• 16d

  Material Handler (Internal Logistics) - Afternoon Shift (1 year contract)

  Etobicoke, ON

  On-siteFull Time

  SM

  S&C Minimal

  1+ YOECandidates need at least one year of material handling experience in manufacturing and one year of safe forklift driving, including electric forklifts. They also need attention to detail, basic math and computer skills, and the ability to lift and move parts from 5 to 20 lbs.

  Tugger, Forklift, Electric forklift, Oracle ERP, Scales, Calipers

• 16d

  Licensed diesel truck technician/mechanic i

  Stoney Creek, ON

  $43–$48/hr

  

  Penske Truck Leasing: Penske Truck Leasing is a Penske Transportation Solutions company headquartered in Reading, Pennsylvania.

  5+ YOECandidates need 5+ years of practical tractor-trailer maintenance experience, a Red Seal or 310T provincial licence, and a Class D or Class 3 driver's licence with air brake certification, or the ability to obtain it within 6 months. Proficiency with diagnostic, welding and power tools is required.

  hand tools, power tools, pneumatic wrenches, welding equipment, hydraulic jacks, hoists

• 16d

  CNC Machine Operator

  Brantford, ON

  $23–$26/hrContract

  

  Randstad Canada

  1+ YOECandidates need at least one year of CNC operating experience in a manufacturing or job-shop setting, the ability to read blueprints and understand basic GD&T, hands-on use of precision measuring tools, and the ability to stand for long periods and lift up to 50 lbs.

  CNC mill, CNC lathe, CNC router, micrometer, caliper, depth gauge

• 16d

  Component and Product Safety Engineer

  Markham, ON

  $90k–$100k/yr

  MP

  Murata Power Solutions, Inc.

  5+ YOECandidates need five to eight years of experience in component engineering, product safety or power electronics, plus a Bachelor's in Electrical or Electronics Engineering (or a three-year diploma with experience). They need knowledge of IEC/EN 62368-1, IEC/EN/UL 60601, and power conversion circuits.

  Microsoft Excel, Microsoft Windows, CAD software, Electronic measurement instruments, Environmental test chambers

• 16d

  Senior APC Project Engineer – Mining, Metals & Cement

  Saint-Laurent, QC

  Full Time

  CA

  CAABB ABB Inc.

  10+ YOECandidates need a bachelor's degree in engineering and 10+ years of hands-on advanced process control or process optimization experience. Practical knowledge of mining or cement processes and control systems is also required.

  ABB 800xA, ABB Ability, Expert Optimizer, DCS, PLC, OPC

• 17d

  Python developer, internal tools – mid-level

  Sherbrooke, QC

  $120k–$138k/yrRemoteFull Time

  

  Nord Quantique: It provides a faster pathway to fault-tolerant quantum computing.

  4+ YOECandidates need a science or computer-related degree, at least 4 years of industry software development experience and strong Python skills. Advanced English is required, and experience in R&D or a scientific field is an asset.

  Python

• 17d

  Junior Project Engineer-in-Training (6 month contract position)

  Woodbridge, ON

  Full Time

  

  AGI

  2+ YOECandidates need a bachelor's degree in an engineering discipline and must be working toward professional engineering registration. Up to 2 years of engineering experience is expected, and exposure to food processing or industrial construction is an asset.

  AutoCAD, Inventor, SolidWorks, Revit, Microsoft Office

20 companies