“schematic” jobs in Canada – Page 15

No matching filters. Try another name.

Results

• 4d

  Work Equipment Maintainer

  British Columbia

  ?

  POSITION REQUIREMENTS:; Must be at least 18 years of age; Valid driver’s license

• 4d

  Electronics Hardware Engineer

  Burnaby, BC

  $100k–$120k/yrOn-siteFull Time

  

  Algo Communication Products: Founded in 1968, Algo has been a telecommunications or information technology company with over 50 years of experience developing, designing, and…

  5+ YOECandidates need a degree, diploma or equivalent practical experience in electrical or electronics engineering, plus at least 5 years of hardware engineering work. Strong skills in circuit design, multi-layer PCB layout, Altium Designer, bench test equipment and embedded communication interfaces are required, along with unrestricted Canadian work authorization.

  Altium Designer, Oscilloscope, Multimeter, Logic analyzer, Spectrum analyzer

• 4d

  Construction Foreman

  Portage la Prairie, MB

  $27.60–$34.50/hrFull Time

  

  SEYMOUR PACIFIC DEVELOPMENTS LTD.

  5+ YOECandidates need about 5 years of residential wood-frame multifamily construction experience and knowledge of building codes and safety rules for multi-storey apartments. They must read blueprints well and show strong leadership, organization and decision-making skills.

  blueprints, architectural schematics

• 4d

  Assembler

  Nisku, AB

  Full Time

  SL

  Silent-Aire Limited Partnership

  Candidates need to speak and understand English well, work safely, and lift and carry over 40 pounds consistently. Reading a tape measure in feet and inches and basic fraction math are required, and blueprint reading is an asset.

  Wrenches, Drills, Grinders, Forklift, Overhead crane, Tape measure

  4d

  Electrical Engineering Specialist

  Edmonton, AB

  Full Time

  SL

  Silent-Aire Limited Partnership

  15+ YOESilent-Aire needs a candidate with a bachelor's in electrical engineering or an electrical technology diploma and 15+ years of electrical design and field experience. Strong practical skills in power distribution, motor controls, VFDs and troubleshooting are required.

  AutoCAD Electrical, Creo, Revit, Bluebeam, ETAP

• 4d

  Millwright or Industrial Electrician - Sunday - Thursday - 1:00pm to 9:00pm

  Delta, BC

  Full Time

  GW

  Golden West Baking Company ULC

  3+ YOECandidates need 3 to 5 years of experience in fast-paced manufacturing, ideally in food, and an industrial millwright or electrician ticket, preferably Red Seal. Industrial controls, PLC, welding and strong English communication skills are required.

  Allen Bradley PLC, Siemens PLC, VFD drives, HMI, Forklift, Lathe

• 4d

  Substation Designer

  Toronto, ON

  $78k–$107k/yrFull Time

  

  AtkinsRéalis

  6+ YOEAtkinsRéalis needs an associate degree in electrical engineering technology and six to eight years of substation design experience. Candidates must know Hydro One and Toronto Hydro CADD standards and tools like AutoCAD, MicroStation and ProjectWise.

  AutoCAD, Bentley MicroStation, ProjectWise, Autodesk Revit, Electronic document management systems

• 4d

  Senior Architect (Major Aviation Infrastructure)

  Toronto, ON

  $100k–$120k/yrOn-siteFull Time

  

  Egis Group: Egis is a leading global architectural, consulting, construction engineering, operations and mobility services firm.

  10+ YOECandidates need a professional architecture degree, advanced Revit skills, and 10 to 15 years of experience delivering large projects through construction documents. Ontario Building Code knowledge and experience with multidisciplinary teams are required; an OAA licence is an asset.

  Revit

• 4d

  Custom Engineering Specialist

  Calgary, AB

  AI

  Ametek, Inc.: is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales of approximately…

  3+ YOECandidates need a bachelor's degree in mechanical, electrical or instrumentation engineering, with up to 3 years of relevant experience. Experience with cross-functional teams, manufacturing environments, ISO procedures and CAD tools is an asset, along with a willingness to use AI tools.

  SolidWorks, AutoCAD, SolidWorks PDM, SolidWorks Simulation, Navision ERP, Microsoft Office

• 4d

  Assistant Manager II

  Saskatchewan

  Full Time

  DT

  DOLLAR TREE STORES CANADA, INC.

  Candidates need retail or grocery store management experience, strong communication and customer service skills, and problem-solving ability. They must read and explain operational directives and be able to lift up to 55 lbs and work on their feet all shift.

  POS, cash register

  4d

  Assistant Manager I

  Leamington, ON

  Part Time

  DT

  DOLLAR TREE STORES CANADA, INC.

  Candidates need strong communication, organization and problem-solving skills, plus retail store management experience (preferred). They must be able to lift up to 55 lbs and work at a fast pace in a team environment.

  cash register, POS

• 4d

  Automation & Controls Supervisor - SBB

  Slave Lake, AB

  $102k–$136k/yrFull Time

  

  Tolko Brand - External: With state-of-the-art operations across western Canada, Tolko is a leading manufacturer of a wide range of forest products for customers around the…

  7+ YOECandidates need a technical or engineering diploma or degree, an Engineer or Technologist certification, and 7+ years of industrial controls and automation experience, ideally in forest products manufacturing. Hands-on Allen-Bradley PLC, Rockwell software, HMI, motor control and industrial networking skills are required, along with prior leadership experience.

  Allen-Bradley PLC, Rockwell Software, HMI, Historian, VMware

• 4d

  Oshawa Automotive Installer

  Oshawa, ON

  $24–$26/hrOn-siteFull Time

  

  Safe Fleet

  Candidates need experience with automotive electrical and mechanical systems, a valid driver's licence, and the ability to lift 50 pounds. Attention to detail, teamwork and comfort in a fast-paced industrial setting are also required.

• 4d

  Control Systems Engineer

  Calgary, AB

  Full Time

  C

  CPKC

  1+ YOECandidates need an electrical engineering bachelor's degree or equivalent, eligibility for E.I.T. registration with APEGA, and one year of experience with PLCs, electronic control systems and electrical design. A valid driver's licence and a passport allowing unrestricted travel to the U.S. are also required.

  Rockwell PLC, Contactors, Breakers, Relays

• 4d

  Control Systems Engineer

  Calgary, AB

  ?

  Adhere to CPKC's safety policies, procedures, and regulatory requirements while supporting engineering and field activities; POSITION REQUIREMENTS:; A bachelor’s degree or equivalent experience in Electrical…

• 4d

  Millwright

  Cobourg, ON

  

  Johnvince Foods: Johnvince Company™ has been an industry leader in snacking and related food manufacturing, distribution, and innovation for over half a century.

  3+ YOECandidates need 3 to 4 years of progressive industrial maintenance or manufacturing experience, knowledge of hydraulics, pneumatics and conveyors, and the ability to read blueprints. A millwright trade certification or post-secondary training is needed, with Red Seal an asset, plus lockout/tagout knowledge.

  CMMS, Blueprints and schematics

• 4d

  Field Service Technician

  Canada

  Full Time

  MC

  Munters Canada Inc (MCD)

  3+ YOECandidates need three to five years of commercial or industrial HVAC experience, or equivalent vocational training, plus strong troubleshooting skills. They must be able to obtain CFC certification within 90 days and have a high school diploma or equivalent.

  PLC

• 4d

  Journeyperson Millwright

  Calgary, AB

  $49.83–$55.19/hrFull Time

  

  City of Calgary

  Candidates need a Journeyperson Millwright certificate or Interprovincial Red Seal and a valid Class 5 licence with a clean demerit record. Plant experience, a power engineering certificate and confined space certification are assets.

  Lathe, Milling machine, Drill press

• 4d

  Machine Operator Days

  Norwich, ON +1

  On-siteFull Time

  LN

  Linamar - New

  Candidates need a high school diploma or equivalent, with technical or vocational training preferred. Prior machine operator or manufacturing experience is an advantage, along with the ability to read blueprints, use measuring and power tools, and lift up to 50 lbs with a lifting device.

  grinders, cutting torch, hand tools, power tools, measuring tools, forklift

• 4d

  Forklift Mechanic

  Mississauga, ON

  

  Crown Lift Trucks ULC

  1+ YOECandidates need a high school diploma, a valid driver's licence, and industry-related training or one to two years of experience (preferred). They must read hydraulic and electrical schematics and service manuals, use common hand tools and testing equipment, and communicate well with customers.

  Common hand tools, Electrical/air tools, Torch, Arc welder, Testing equipment, Service vans

• 4d

  Millwright

  Concord, ON

  Full Time

  

  NLG - Next Level Group

  Candidates need a Grade 12 diploma, an Industrial Millwright 433A Certificate of Qualification, and certification to operate high-reach equipment. Strong mechanical aptitude, troubleshooting skills, and experience with CNC environments are essential.

  CNC machinery, lathe, milling machine, drilling machine, manual saw, welding equipment

• 4d

  Production Engineer

  Burlington, ON

  Full Time

  EM

  Evertz Microsystems Limited: Evertz Microsystems (TSX:ET) is a leading global manufacturer of broadcast equipment and solutions that deliver content to television sets,…

  1+ YOECandidates need a diploma or degree in software, electrical, electronic or computer engineering and 1 to 3 years of software QA or hardware/software testing experience. Strong communication, problem-solving, multitasking and the ability to read electrical schematics are required; networking and Python certifications are assets.

  JIRA, Python

• 5d

  Industrial Electrician (Rotating/Steady Midnights)

  Ingersoll, ON

  Full Time

  A

  AMTB

  5+ YOECandidates need a licensed industrial electrician credential and at least 5 years of industrial or manufacturing experience, ideally in automotive or steel processing. They need strong skills in PLCs (Siemens, Allen-Bradley), VFDs, robotics, high- and low-voltage systems, and reading schematics, plus knowledge of LOTO and OSHA safety.

  PLC, VFD, CMMS, electrical schematics, blueprints

• 5d

  BUILDING SYSTEM TECHNICIAN (2374)

  Quebec

  

  Cree Board of Health and Social Services of James Bay: The CBHSSJB operates a 29-bed hospital in Chisasibi, and in each community, a Miyupimaatisiiun Community Centre (CMC), comparable to the CLSCs found…

  5+ YOECandidates need a DEC in building mechanics, architectural or civil engineering technology, plus five years of relevant experience with all building systems. Fluent English, a valid driver's licence and willingness to be on call and travel occasionally are also required.

  CMMS, BMS, Microsoft Excel, Microsoft Word, Microsoft Outlook, Microsoft PowerPoint

21 companies