“Testing instruments” jobs in Canada – Page 16

No matching filters. Try another name.

Results

• 4d

  Machine Saw Operator

  Cambridge, ON

  $20–$25/hrFull Time

  

  Acuren Inspection, Inc.: Acuren (NYSE: TIC) is a leading provider of critical asset integrity services.

  Candidates need a high school diploma or equivalent and mechanical aptitude for operating shop equipment. Experience with industrial saws, measuring instruments, drawings and manufacturing or testing environments is an asset, as are forklift and overhead crane credentials.

  Band saw, Abrasive saw, Calipers, Micrometers, Tape measures, Forklift

  4d

  Machine Saw Operator

  Cambridge, ON

  $20–$25/hr

  

  Acuren Inspection, Inc.: Acuren (NYSE: TIC) is a leading provider of critical asset integrity services.

  Acuren needs candidates with a high school diploma or equivalent. Experience with industrial saws, measuring instruments, drawings and shop equipment is an asset, as is forklift or overhead crane certification and the ability to lift up to 50 lbs.

  Band saw, Abrasive saw, Calipers, Micrometers, Tape measure, Forklift

• 4d

  Ophthalmic Assistant Eye Clinic

  Toronto, ON

  UH

  Unity Health Toronto

  2+ YOECandidates need graduation from a post-secondary Ophthalmic Assistant program and preferably two years of recent ophthalmic experience. They need strong computer, communication, time management and patient service skills, plus a good attendance record and flexibility for early or late shifts.

  Snellen chart, Tono-pen, OCT, Amsler grid

• 4d

  Electrical Apprentice 1st

  Nisku, AB

  Full Time

  ?

  In 2021, Silent-Aire became part of Johnson Controls, further enhancing the ability to deliver cutting-edge solutions worldwide; Support the preparation of material take‑offs and identification of required electrical…

• 4d

  Millwright

  Whitchurch-Stouffville, ON

  SI

  Stella-Jones Inc.

  3+ YOECandidates need a Red Seal Millwright certificate, at least 3 years of experience, and a valid driver's licence. Strong mechanical, electrical, hydraulic, pneumatic and welding skills, plus troubleshooting ability, are required.

  hand tools, power tools, precision measuring instruments, welding equipment

• 4d

  Laboratory Technician

  Calgary, AB

  $41.49–$55.51/hrFull Time

  

  City of Calgary

  2+ YOECandidates need a two-year technical diploma in chemistry, chemical technology, environmental sciences or a related field, plus at least two years in an ISO 17025 accredited environmental or water laboratory. A Class 5 or GDL licence and intermediate Microsoft Office skills are also required.

  LIMS, Microsoft Office, analytical lab instruments, online instruments, field instruments

• 4d

  Senior Electrical Engineer, Water/Wastewater

  Toronto, ON

  Full Time

  TL

  T.Y. Lin International Canada Inc.

  8+ YOET.Y. Lin International Canada Inc. needs candidates with a Bachelor's degree in electrical engineering, a P.Eng licence in Ontario and 8 to 10+ years of water, wastewater or industrial process experience. Strong skills in PLC and SCADA platforms, design software and process control logic are also required.

  AutoCAD, Revit, SCADA, PLC, HMI, Allen-Bradley

• 4d

  Lab Technical Assistant (BCGEU) - Casual - Flexible Shift- Burnaby, BC

  Burnaby, BC

  

  LifeLabs: LifeLabs is Canada’s leading provider of laboratory diagnostic information and digital health connectivity systems, enabling patients and healthcare…

  Candidates need a high school diploma with post-secondary science or medical terminology courses. Lab experience is an asset, along with strong MS Office skills, excellent communication and attention to detail.

  MS Office, laboratory instruments

• 4d

  Design and Experiential Learning Engineer

  Edmonton, AB

  On-siteFull Time

  

  University of Alberta

  8+ YOECandidates need a Bachelor's degree in Electrical and Computer Engineering (Master's preferred), a P.Eng. designation, and 8+ years of experience in R&D and physical testing. Strong instrumentation, control system, sensor and leadership skills are required.

  LabVIEW, DAQ systems, Strain gauges, Pressure transducers, LVDTs, Thermocouples

• 4d

  Laboratory Tech - Wiring Devices

  Toronto, ON

  $2.9k–$3.4k/wkFull Time

  CG

  CSA Group Testing & Certification Inc.

  3+ YOECandidates need an engineering technician diploma or associate's degree in engineering technology, plus 3 to 4 years of related experience. Knowledge of electrical and electronic circuits, test instruments and CSA or UL standards is an asset.

  oscilloscope, power supplies, power analyzer, laboratory test equipment

• 4d

  Enseignant(e) en Techniques d’aménagement et d’urbanisme

  Montréal, QC

  Part Time

  CD

  Cégep de Rosemont

  Baccalauréat en géographie, géomatique ou arpentage; Enseignement du dessin technique, des cartes et plans et de l'arpentage; Maîtrise d'AutoCAD, ArcGIS et SketchUp

  AutoCAD, ArcGIS, SketchUp, GPS, niveau optique, niveau laser

• 4d

  Senior Audit Manager - Capital Markets

  Toronto, ON

  

  Bank of Montreal

  7+ YOECandidates need 7+ years of relevant experience and a post-secondary degree or equivalent, with expert communication, analytical and influence skills. CIA, CPA, CFA or FRM designations and knowledge of Capital Markets, Treasury risk and OSFI or Basel frameworks are assets.

  Data analytics tools

• 4d

  PLC Programmer

  Penetanguishene, ON

  Full Time

  

  Techform, a Division of Magna Closures Inc.

  Candidates need post-secondary education in robotics or automation, PLC programming experience with Allen-Bradley Logix and Studio 5000, welding experience, and robot programming skills for ABB, Fanuc or Panasonic. Vision system experience and the ability to lift up to 50 lbs are also required.

  Studio 5000, Keyence vision system, Cognex camera, barcode scanner, ABB robot, Fanuc robot

• 4d

  Safety Specialist (Temporary/Term)

  Ontario

  Full Time

  BB

  BPLP Bruce Power L.P.

  6+ YOECandidates need a university degree in Engineering, Industrial Hygiene, Ergonomics or equivalent, and over 6 years up to 8 years of relevant experience. The Canadian Registered Safety Professional (CRSP) designation is noted as the normal route, along with strong analytical, report writing and communication skills.

  Inspection, Regulatory compliance, Research, Ergonomics, Loss prevention, Risk management

• 4d

  Administrative Support III

  Okotoks, AB

  

  Alberta Health Services

  1+ YOECandidates need Grade 12 or equivalent and one year of acute care registration experience within the last two years. They must be proficient in Connect Care, Netcare, Client Registry and Microsoft Office, know medical terminology, and type 40 words per minute.

  Connect Care, Netcare, Client Registry

  4d

  Certified Medical Device Reprocessing Technician

  Hinton, AB

  Per diem

  

  Alberta Health Services

  Candidates need completion of an accredited Medical Device Reprocessing program and an HSPA or CSA certification. The posting also names knowledge of infection prevention and Universal Precautions.

  Quality assurance

• 4d

  Laboratory Technologist I

  Cold Lake, AB

  Full Time

  

  Alberta Precision Laboratories

  Candidates need completion of an accredited Medical Laboratory Technology program and active or eligible registration with the College of Medical Laboratory Technologists of Alberta. Strong organization, attention to detail, problem-solving and communication skills are required, with preferred core lab and phlebotomy experience.

  XT3400 chemistry analyzer, Access II, iStat, Triage Meter, ACL Elite Pro, Sysmex XN550

• 4d

  2nd- 4th Year Instrument Apprentice

  Dawson Creek, BC

  Full Time

  

  Control Tech: Control Tech is a leading Electrical, Instrumentation & Automation solutions provider operating throughout Canada and the US.

  Candidates need a high school diploma, standard First Aid/CPR with AED, H2S Alive, CSO and CSTS. Registered apprenticeship, oil and gas experience, a clean driving record and a passed pre-employment drug and alcohol test are also required or preferred.

  Pressure test equipment, Electrical test equipment, Calibration equipment

  4d

  Journeyman Instrumentation

  Dawson Creek, BC

  Full Time

  

  Control Tech: Control Tech is a leading Electrical, Instrumentation & Automation solutions provider operating throughout Canada and the US.

  Candidates need a Red Seal Journeyman Certificate, oil and gas process experience, and intermediate to advanced computer skills. Standard First Aid/CPR, H2S Alive, CSO and CSTS are required, along with a clean driving record and a passed pre-employment drug and alcohol test.

  P&ID drawings, pressure test equipment, electrical test equipment, IFS Aurena Tech Portal, chemical pumps

  4d

  Journeyman Instrumentation

  Peace River, AB

  Full Time

  

  Control Tech: Control Tech is a leading Electrical, Instrumentation & Automation solutions provider operating throughout Canada and the US.

  Candidates need a Red Seal Journeyman Certificate, oil and gas process experience, and intermediate to advanced computer skills. They also need Standard First Aid/CPR with AED, H2S Alive, CSO and CSTS, plus a clean driving record and a pre-employment drug and alcohol test.

  ERP system, IFS Aurena Tech Portal, pressure test equipment, electrical test equipment, P&ID drawings

• 4d

  Hearing Instrument Specialist

  Calgary, AB

  Full Time

  ?

  Create an exceptional patient experience for the customer by counselling and instructing; Ensure repeat and referral business by creating an outstanding experience for every patient; New grads welcome!

• 4d

  Hearing Instrument Specialist

  Strathmore, AB

  Full Time

  ?

  Create an exceptional patient experience for the customer by counselling and instructing; Ensure repeat and referral business by creating an outstanding experience for every patient; New grads welcome!

• 4d

  Hearing Instrument Specialist

  Edmonton, AB

  Full Time

  ?

  Create an exceptional patient experience for the customer by counselling and instructing; Ensure repeat and referral business by creating an outstanding experience for every patient; New grads welcome!

  Counselling, Hearing aids, Hearing loss, Lead generation, Sales, Patient care

• 4d

  Technical Service Representative, ACT (Calgary, Alberta)

  Calgary, AB

  $68k–$75k/yr

  

  Getinge

  1+ YOECandidates need a biomedical engineering degree or diploma and 1 to 3 years of field service, bio-med or technical repair experience. A valid driver's licence and passport are required, along with strong troubleshooting, communication and customer skills.

  Test instruments, Microsoft Office, Telephone equipment, Company vehicle

17 companies