“PLC control systems” jobs in Canada – Page 18

No matching filters. Try another name.

Results

• 20d

  Mechanical Engineer

  Hamilton, ON

  $80k–$100k/yrOn-siteFull Time

  

  Smiths Group

  5+ YOECandidates need a bachelor's degree in engineering and 5+ years of similar technical experience in an industrial setting. Strong knowledge of rotating equipment, mechanical seals, pumps and hydraulic systems is required.

  Solid Edge, CAD, MS Office

  21d

  CNC Machinist (Rotating Shift)

  Hamilton, ON

  $65k–$82k/yrOn-siteFull Time

  

  Smiths Group

  5+ YOEJohn Crane needs a candidate with hands-on CNC milling or turning experience, the ability to read blueprints and G-code, and a high school diploma plus two years of technical training. Over five years of related experience and Red Seal or equivalent are also listed, along with the ability to work loud plant-floor conditions wearing PPE.

  CNC mill, vernier calliper, CMM, Mazak, Okuma, Haas

• 20d

  Warehouse Manager

  Pitt Meadows, BC

  Full Time

  

  Unlimited Potential

  3+ YOECandidates need 3 to 5 years of related experience or an equivalent mix of education and experience; a bachelor's degree is preferred. They must know OHS and DOT regulations, hold forklift and hazmat certification, and show strong leadership and organization skills.

  AS400, forklift, pallet jack, stock picker

  21d

  Warehouse Manager

  Pitt Meadows, BC

  Full Time

  

  Unlimited Potential

  3+ YOECandidates need 3 to 5 years of related experience or an equivalent mix of education and experience; a bachelor's degree is preferred. They must know OHS and DOT regulations, hold forklift and hazmat certification, and show strong leadership and organization skills.

  AS400, forklift, pallet jack, stock picker

• 21d

  Electrical Engineering Software Designer (Nuclear)

  Cambridge, ON

  $35–$55/hr

  

  Eclipse Automation

  7+ YOECandidates need 7 to 8 or more years of experience in an OEM custom automation environment and a post-secondary engineering degree or diploma in electrical, systems or computer engineering. Strong programming, electrical and mechanical problem-solving skills and hands-on robotics and control system experience are also required.

  PLC, PC, Robots, Motion controllers, Vision systems, Lasers

  21d

  Software Design Co-op, Nuclear

  Cambridge, ON

  $25–$30/hr

  

  Eclipse Automation

  Candidates need to be enrolled in a post-secondary engineering program in mechanical, electrical or systems engineering that includes a co-op work term. They need strong organization, advanced Excel skills, excellent written and oral communication, and the ability to work in a team with minimal supervision.

  PLC, PC, robots, motion controllers, vision systems, lasers

  21d

  Controls Software Design Co-op

  Cambridge, ON

  $24–$28/hr

  

  Eclipse Automation

  Candidates need to be currently enrolled in a post-secondary engineering program requiring a co-op term, specializing in mechanical, electrical or systems engineering. Strong organization, advanced Excel skills, teamwork and excellent written and oral communication are needed.

  PLC, PC, Robots, Motion controllers, Vision systems, Lasers

• 21d

  Applications Engineer

  Mississauga, ON +1

  ST

  Securitas Technology Canada Corporation: Securitas Technology, part of Securitas, is a global provider of integrated security, health, and safety solutions and services.

  5+ YOECandidates need at least 5 years of estimating experience in fire alarm or security low-voltage work. They must know NFPA and NEC codes, read construction drawings, and work well with manufacturers' products. NICET Level III is preferred.

  MS Office, Acrobat, Visio, DWG Writer, Big Machines

• 21d

  Cybersecurity Research Scientist

  Fredericton, NB

  Full Time

  

  Canadian Nuclear Laboratories LTD

  2+ YOECandidates need an undergraduate degree in computer science, engineering or applied math and 2 to 5+ years of experience across industrial control systems and cyber security. Strong problem-solving, communication skills and eligibility for Reliability Status clearance are also required.

  SCADA, PLC, DCS, HMI, Siemens, Allen Bradley

• 21d

  Electrical Engineering Co-Op Student

  Bowmanville, ON

  $25/hr

  

  VCNA

  Candidates need to be enrolled in an Electrical Engineering undergraduate program at a recognized Canadian institution, ideally with 1-2 years of study. They need a basic understanding of industrial electrical systems, Microsoft Office skills, and the ability to work in a physically demanding plant.

  PLC, HMI, AutoCAD Electrical, Microsoft Office

• 21d

  Senior Control Systems Engineer

  Calgary, AB

  Full Time

  F

  Fluor: Fluor Corporation is a global engineering, procurement and construction company.

  10+ YOECandidates need a Bachelor's degree in engineering, preferably electrical, control systems or automation, and 10+ years of control systems experience. Strong hands-on skill with DCS, PLC, SIS and instrumentation, plus leadership and communication ability, are required; a P.Eng. or eligibility is an asset.

  DCS, PLC, SIS

• 21d

  Senior Control Systems Engineer

  Calgary, AB

  FC

  Fluor Careers: Fluor Corporation is a global engineering, procurement and construction company.

  10+ YOECandidates need a Bachelor's in Engineering, ideally electrical, control systems or automation, and over 10 years of control systems experience on industrial projects. Strong hands-on knowledge of DCS, PLC, SIS and instrumentation is required, along with leadership and communication skills. A P.Eng. or eligibility for registration is an asset.

  DCS, PLC, SIS, P&ID, 3D models

• 21d

  Electrical Engineer (Controls and Infrastructure)

  Richmond, BC

  

  General Fusion Inc

  5+ YOECandidates need a bachelor's degree in electrical engineering, P.Eng. registration or eligibility with EGBC, and 5+ years designing and commissioning control systems. Strong panel wiring, PLC programming in IEC 61131-3 languages, knowledge of the Canadian Electrical Code and CSA panel standards, and grounding and noise practices are required.

  Beckhoff TwinCAT, PLC, multimeter, insulation resistance tester, oscilloscope, AutoCAD Electrical

• 21d

  Technicien.ne en automatisation

  Québec, QC

  

  LAPORTE L.E.C.: LAPORTE is a consulting engineering firm specializing in pharmaceutical, agrifood, industrial biotech and industrial plant processes, which has been…

  3+ YOEDEC en électronique industrielle; 3 à 5 ans d'expérience en conception de systèmes automatisés; Connaissance de la suite Rockwell et des produits Siemens

  Rockwell, Siemens, AutoCAD, AutoCAD Electrical

• 21d

  Technical Service Manager

  Edmonton, AB

  LG

  Lotus Group

  8+ YOECandidates need 8-10 years in instrumentation, electrical or automation, ideally in oil and gas. A Red Seal Instrumentation and Control or Electrician ticket, or an Electrical Engineering degree, plus Allen-Bradley or Siemens experience and Modbus knowledge are required.

  Allen-Bradley, Siemens, Modbus, PLC, VFD

• 21d

  Maintenance Technician (Electrician)

  Windsor, ON

  $45.23–$45.98/hr

  

  CpK Interior Products Inc

  2+ YOECandidates need a high school education, a valid Electrical License (309A or 442A) and 2-3 years of manufacturing or automotive experience. They must read electrical schematics and manuals in English and troubleshoot electrical and mechanical problems; robotics, PLC and HMI experience is preferred.

  PLC, HMI, robotics systems, LOTO equipment, communication devices

• 21d

  Project Manager

  Delta, BC

  Full Time

  

  Goldbeck Recruiting: Goldbeck Recruiting is a recruitment and executive search firm based in Vancouver, BC helping companies fill challenging positions since 1997.

  5+ YOECandidates need at least 5 years of project management experience in industrial manufacturing, engineering or automation, plus a university degree or diploma in a technical discipline. Working knowledge of AutoCAD, SolidWorks, PLC controls and SCADA is required, and a PMP is an asset.

  AutoCAD, SolidWorks, Microsoft Excel, Microsoft Word, Microsoft PowerPoint, Microsoft Outlook

• 21d

  Instrumentation Technician

  Saskatoon, SK

  Full Time

  CC

  Cameco Corporation-Saskatoon

  3+ YOECandidates need a red seal or Saskatchewan journeyperson instrumentation certificate and three to five years of industrial or mine experience. Teamwork and comfort with a rotation schedule and flying to site are also required.

  DCS, PLC, flowmeters, pH transmitters, density gauges, pressure transmitters

• 21d

  Instrumentation Technician

  Canada

  

  Cameco: Cameco is a global nuclear energy company.

  3+ YOECandidates need an interprovincial Red Seal or Saskatchewan journeyperson industrial instrumentation certificate and three to five years of industrial or mine experience. They should be able to work in a team and on a rotation schedule with air commuting.

  DCS, PLC, Foxboro DCS, SAP, flowmeters, pH transmitters

• 21d

  Apprentice, Instrument Mechanic

  Trail, BC

  On-siteFull Time

  T

  Teck

  Candidates need Grade 12 completion, at least pre-apprentice standing as an Instrument Mechanic, and WHIMIS certification. Experience in an industrial setting, a valid driver's licence and safe use of hand tools are also needed, with Foxboro, ABB, Modicon PLC and Wonderware HMI knowledge as assets.

  Foxboro, ABB systems, Modicon PLC, Wonderware HMI, basic hand tools

• 21d

  Industrial Electrician

  Brantford, ON

  $42/hrFull Time

  

  Kelly Services

  Candidates need an industrial electrician licence (442A) or Red Seal, or a 309A with industrial experience. They also need PLC, motor control and troubleshooting experience, and the ability to read electrical schematics.

  PLC, robotic systems, injection molding machines, pneumatic equipment, hydraulic equipment

• 21d

  Ingénieur en Automatisation

  Quebec

  Full Time

  GS

  Groupe SGM

  3+ YOEDEC en technologie de l'électronique industrielle ou baccalauréat en génie de la production automatisée; Minimum de 3 années d'expérience pertinente; Connaissance des technologies Rockwell, Siemens ou Schneider

  Rockwell, Siemens, Schneider, HMI, SCADA, VMware

• 21d

  Technicien électrique SAV

  Canada

  LI

  Les Industries Fournier inc.

  DEC en génie électrique ou formation pertinente; Forte connaissance des automates (Allen Bradley, Siemens, Schneider); Disponibilité pour voyager 50 à 75 % du temps

  Allen Bradley, Siemens, Windows, PLC

• 21d

  OT Systems Engineer

  Yellowknife, NT

  $66.22–$80.48/hrFull Time

  

  NORTHWEST TERRITORIES POWER CORPORATION: NTPC also owns and operates alternative energy assets used for the supply of residual heat, solar power and co-generation.

  5+ YOECandidates need an electrical engineering bachelor's degree, five years of supervisory OT systems experience (utility experience preferred), a Class 5 licence and a satisfactory criminal records check. Eligibility for NAPEG registration and strong English communication are required.

  SCADA, HMI, PLC, RTU, IED, data historian

20 companies