“Maintain mechanical equipment” jobs in Canada – Page 26
No matching filters. Try another name.
10,000+ jobs·Latest jobs · Canada··
Why we group jobs by company
Jobs from the same identified company share one card in each results page. As you load more, we merge that company’s additional jobs into its existing card, so large employers do not keep taking extra space. Use the arrows or numbered dots to browse, or View all to compare its loaded jobs and reach the company’s full list. Company pages show separate job cards.
5+ YOECandidates need registration with the BC Care Aide & Community Health Worker Registry, a minimum HCA Provincial Certification, and fluent English, spoken and written. At least 5 years of HCA or nursing experience in a continuing care setting, dementia care experience, and the ability to lift and transfer residents are also required.
3+ YOECandidates need a valid Ontario 310T Truck and Coach Technician certificate and at least three years of progressively responsible repair experience on heavy, medium and light-duty vehicles, including hydraulic and computerized systems. A valid class G driver's licence, a clear criminal record check and their own personal mechanical tools are also required.
Candidates need Journeyman Pipefitting certification, IRATA Level 1 or willingness to obtain it, and safety certifications such as OSSA or CSE/M. Fall Protection certification is an asset.
Sureway Construction Group: Sureway, established in 1973 by founder and President, Dennis O’Rourke, is one of Alberta’s largest privately owned civil construction general…
5+ YOESureway Construction Group needs a Red Seal Off Road journeyperson with 5 to 10 years of experience and off-road experience. Candidates must also have CAT E.T., S.I.S. or Komatsu component experience and be able to read hydraulic and electronic schematics.
Sureway Construction Group: Sureway, established in 1973 by founder and President, Dennis O’Rourke, is one of Alberta’s largest privately owned civil construction general…
5+ YOECandidates need Red Seal Off Road journeyperson status, 5 to 10 years of experience, and off-road experience. Experience with CAT ET, SIS or Komatsu is required, plus skills reading hydraulic and electronic schematics.
CAT ET, Komatsu diagnostic software, hand tools, steel toed boots
Calm Air needs candidates with a Transport Canada AME M2 licence, graduation from an accredited aviation program, and a valid driver's licence. Candidates must be able to lift 75 lbs, work shifts, travel, and obtain enhanced security clearance.
ACA, Work independently, Computer skills, Prioritization, Work efficiently, Valid driver's licence
Candidates need overall mechanical ability, strong customer service and communication skills, and pride in quality work. Agriculture equipment technician training, heavy equipment mechanics training, forklift experience and large equipment experience are assets.
Candidates need Grade 12 or GED, graduation from a Rehabilitation Assistant program covering both occupational and physiotherapy, and Basic Cardiac Life Support. They also need good communication and teamwork skills, body mechanics knowledge, basic computer skills, and French is preferred.
Candidates need mechanical aptitude with hand and power tools, the ability to read a tape measure and follow assembly drawings, and the physical capacity to lift and do repetitive shop tasks. Manufacturing, assembly, construction or general labour experience and forklift experience are assets.
Worley: Worley is a global professional services company of energy, chemicals and resources experts headquartered in Australia.
Candidates need a degree or diploma in electrical engineering, electrical engineering technology, electrical design, drafting or a related discipline, plus AutoCAD and MicroStation proficiency. Industrial electrical design experience, working knowledge of the Canadian Electrical Code and hazardous area design are expected.
AutoCAD, MicroStation, AVEVA 2D/3D, SP3D, PDMS, PDS/EERWAY
3+ YOECandidates need a 310T Heavy Diesel Mechanic trade certification, a valid Class G driver's licence (Class A preferred) and 3-5 years of diagnostic and repair experience. A clean driving and criminal record and experience with computerized maintenance systems are also required.
1+ YOECandidates need a valid DZ or AZ commercial driver's licence with a clean driver's abstract and CVOR, plus at least one year of commercial driving experience or truck driving school completion. They must show they can safely operate heavy collection vehicles and hydraulic packers, meet safety-sensitive standards, and have a strong attendance record.
rear pack truck, box truck, hydraulic packer, compaction system
GFL Environmental: GFL Environmental is the only major diversified environmental services company in North America offering services in solid waste management, liquid…
Candidates need forklift certification and must be able to obtain a Transfer Station/Landfill Operations Certification if required.
GFL Environmental: GFL Environmental is the only major diversified environmental services company in North America offering services in solid waste management, liquid…
1+ YOECandidates need a valid DZ or AZ commercial driver's licence with a clean abstract and CVOR, plus at least one year of commercial driving experience or truck driving school completion. They must be able to pass safety screening, have a strong attendance record, and be flexible about early starts and overtime.
GFL Environmental: GFL Environmental is the only major diversified environmental services company in North America offering services in solid waste management, liquid…
Candidates need forklift certification and must be able to obtain a Transfer Station/Landfill Operations Certification if required.
GFL Environmental: GFL Environmental is the only major diversified environmental services company in North America offering services in solid waste management, liquid…
1+ YOECandidates need a valid DZ or AZ commercial driver's licence with a clean driver's abstract and CVOR, plus at least one year of commercial driving experience or accredited truck driving school training. They must pass company safety standards, have a strong attendance record, and be available for early starts and overtime.
Systemair: Systemair is a Swedish International company and a global leader in the HVAC sector, Founded in 1974 in the city of Skinnskatteberg, Sweden.
2+ YOECandidates need 2+ years of hands-on experience with electrical, control or building automation systems and the ability to read engineering drawings and wiring diagrams. A technical diploma or degree in electrical, controls or mechanical technology is preferred, along with the ability to work independently.
Multimeters, Clamp meters, Power analyzers, CAD models, Data acquisition systems
University Health Network: University Health Network (UHN) is Canada's largest research hospital, which includes Toronto General and Toronto Western Hospitals, Princess…
Candidates need mechanical, electrical and plumbing knowledge, the ability to service beds and lifting devices, and the ability to read drawings. They must work independently, follow procedures closely, and handle heavy lifting, climbing and ladder work.
3+ YOECandidates need 3+ years repairing agricultural, automotive, heavy-duty or related equipment, strong mechanical and diagnostic skills, and independent, team-oriented work habits. A certified Journeyperson Ag Technician or related certification is ideal, and John Deere experience is an asset.
Diagnostic software, Electronic service tools, Computers
7+ YOECandidates need a college diploma or bachelor's degree in mechanical or electrical engineering, 7 to 10 years of industrial fabrication experience, and strong cost estimation skills. Proficiency in SolidWorks, Microsoft Office, and the Visual ERP system, plus knowledge of CSA and UL standards, is required.
Candidates need steel-toed safety shoes, the ability to lift 50 lbs repeatedly, and strong attention to detail. Warehouse experience and power equipment training are considered strong assets.
2+ YOEPoint Hope Maritime Ltd. needs candidates with a college diploma in industrial, manufacturing or mechanical engineering technology and at least two years of manufacturing or marine experience. Candidates must read technical drawings, understand quality assurance, and communicate well in English.
Calipers, Micrometers, Gauges, Torque wrenches, Microsoft Office, ERP systems
POSITION REQUIREMENTS:; High school diploma or general equivalency; an electronics technology degree/certification from an accredited technical institute is a value add; Minimum of 2 years of combined experience in…