“Engineering drawings” jobs in Canada – Page 7

No matching filters. Try another name.

Results

• 1d

  Project Coordinator

  Richmond Hill, ON

  $70k–$85k/yrFull Time

  

  Hays

  3+ YOECandidates need at least 3 years as a project or site coordinator on ICI construction projects in the Greater Toronto Area. They must communicate well in writing and speaking, know construction practices and safety rules, read drawings and use construction software, and hold a valid driver's licence.

  construction software

  1d

  Scheduling Manager, Buildings

  Etobicoke, ON

  $160k–$195k/yrFull Time

  

  Hays

  10+ YOE4+ MgmtCandidates need 10+ years of construction planning and scheduling experience and 4+ years of leadership or mentoring. Strong skills in Primavera P6 or Microsoft Project, CPM and construction sequencing are essential, and a related degree is preferred.

  Primavera P6, Microsoft Project

  1d

  Structural Design Engineer

  Ottawa, ON

  $80k–$100k/yrFull Time

  

  Hays

  5+ YOECandidates need about 5 years of structural consulting experience, a civil or structural engineering bachelor's degree, and PEO registration or progress toward a P.Eng. Strong AutoCAD skills, cold-formed steel design and cladding attachment experience are highly valued.

  AutoCAD, Revit, ETABS, S-Frame, SAP2000, SAFE

• 1d

  Architectural Project Coordinator H/F

  Toronto, ON

  V

  VINCI

  2+ YOECandidates need a diploma or degree in architecture, construction management or engineering technology, and 2-3 years of construction or project coordination experience. They must read drawings and specifications, coordinate subcontractors, and know architectural finishes and MEP coordination.

  Procore, Bluebeam, AutoCAD, Revit, Navisworks, Primavera P6

• 1d

  Maintenance and Job Planner

  Toronto, ON

  TT

  Toronto Transit Commission

  Candidates need a secondary school education or equivalent technical costing experience, plus proven scheduling and cost-control skills. Proficiency in MS Project, Excel, Word and Access is required, and Maximo experience is an asset.

  MS Project, Excel, Word, Access, Maximo

• 1d

  Senior Underground Transmission Line Engineer 2 - Grid

  Remote in Canada

  $111k–$153k/yrRemoteFull Time

  

  Jobgether

  7+ YOECandidates need at least 7 years on underground transmission projects, a CEAB- or ABET-accredited engineering degree, and skills in CYMCAP, cable tension calculations and XLPE cable design. Strong communication and attention to technical accuracy are also required, and candidates must be legally authorized to work in Canada.

  CYMCAP, Microsoft Office

• 1d

  Project Manager, Capital Planning

  London, ON

  Full Time

  EE

  Edison Engineers

  5+ YOEEdison Engineers needs candidates with a degree or diploma in civil engineering, building science or a related field, and at least 5 years of experience in building condition assessments and capital planning. Knowledge of the Ontario Building Code, condominium law and Tarion guidelines is required, and a P.Eng is an asset.

  1d

  Senior AutoCAD Technician

  Dundas, ON

  Full Time

  EE

  Edison Engineers

  3+ YOECandidates need a diploma or degree in architectural or civil engineering technology, 3 to 5 years of drafting experience, and strong AutoCAD skills. Experience with existing buildings and restoration work is strongly preferred, along with the ability to work independently and manage several deadlines.

  AutoCAD

  1d

  Electrical Engineer / Project Manager

  Ontario

  Full Time

  EE

  Edison Engineers

  5+ YOECandidates need a bachelor's degree in electrical engineering, a Professional Engineer licence in Ontario, and about five or more years of electrical engineering and project-management experience in existing buildings. Strong knowledge of Ontario electrical codes, building electrical systems, AutoCAD and Microsoft Office is required.

  AutoCAD, Microsoft Office

• 1d

  Senior Mechanical Building Systems Engineer / Technical Lead

  Montréal, QC

  Full Time

  II

  I8IS - Infiniti Software Solutions

  10+ YOECandidates need fluent French (oral and written), a university degree in mechanical engineering or a DEC in building mechanical systems, and ten years of HVAC or plumbing experience. Strong knowledge of Canadian building codes and CSA, NFPA and ASHRAE standards is also required.

  AutoCAD, Revit

• 1d

  Mechanical Product Designer

  Kitchener, ON

  Full Time

  QL

  Qidni Labs

  3+ YOECandidates need a Bachelor's or Master's in mechanical engineering or a related field and at least 3 years in a mechanical engineering role. Demonstrated skills in design for manufacturing, GD&T, materials selection and injection molding are expected, and familiarity with ISO 13485 or design controls is preferred.

• 1d

  Packaging Developer, Global Packaging & Labelling (12 Month Contract Full-time)

  Vancouver, BC

  Contract

  

  Lululemon: lululemon (NASDAQ:LULU) is an innovative performance apparel, footwear, and accessories company for yoga, running, training, golf, tennis, and other…

  Candidates need experience in packaging development, including structural design, material selection and vendor work, plus knowledge of packaging engineering and manufacturing. Candidates also need project management skills, design and documentation tool proficiency, and a degree in a related field or equivalent practical experience.

  CAD software, Adobe Creative Suite, PLM systems

• 1d

  Senior Process Engineer

  Calgary, AB

  Full Time

  BP

  Bunch Projects

  10+ YOECandidates need a chemical engineering bachelor's degree, P.Eng. registration with APEGA and 10 to 15+ years of process engineering experience on EPC or production projects. Strong analysis, simulation and communication skills are needed, with direct experience on Western Canadian gas, oil and energy infrastructure.

  HYSYS, VMGSim, Symmetry, Bluebeam Revu, Navisworks, Microsoft Office

• 1d

  Senior Mechanical Engineer

  Waterloo, ON

  Full Time

  WI

  WaveRyde Instruments

  8+ YOECandidates need a mechanical engineering degree and about 8 or more years of product development experience. They must have strong SolidWorks skills, hands-on MIL-STD-810 and shock and vibration testing experience, and experience supporting prototype or low-volume builds.

  SolidWorks, MIL-STD-810 test equipment, shock and vibration test equipment

• 1d

  Intermediate / Senior Qualified Aquatic Environment Specialist (QAES)

  Canada

  Full Time

  CG

  Compass Geomatics Ltd.

  5+ YOECandidates need a biology or environmental diploma or degree, 5+ years of aquatic or environmental experience, and QAES status or the ability to meet QAES expectations. Field leadership, strong communication and a valid driver's licence are required.

  GPS units, Avenza, Collector, tablets, ATVs, UTVs

• 1d

  Project Manager

  Montréal, QC

  Full Time

  L

  LEDPAX

  5+ YOECandidates need 5+ years of project management experience, preferably in lighting, construction or manufacturing, strong contract literacy, and proficiency in Excel and project tools. Bilingual English and French is an asset.

  Excel, Asana, Monday.com, Microsoft Office

• 1d

  Senior Mechanical Designer

  Woodbridge, ON

  Full Time

  OI

  ODL, Inc

  5+ YOECandidates need a diploma in mechanical engineering technology or a related field and at least 5 years of custom automated equipment design. They need advanced SolidWorks skills and proven experience with hydraulic presses, SMC molding, steel stamping and CNC door machinery.

  SolidWorks, CNC machinery, robotic handling systems

• 1d

  Electrical Project Leader

  Niagara Falls, ON

  Full Time

  CF

  CAN-ENG Furnaces International Ltd.

  Candidates need an engineering degree or three-year technology diploma, experience with PLC, HMI and industrial networks, and knowledge of Canadian or American electrical codes. Strong communication, team leadership and a valid unrestricted driver's licence are also required.

  PLC, HMI, AutoCAD, EPLAN

• 1d

  2026-67 Capital Projects Manager (FT, Permanent)

  Dawson Creek, BC

  Full Time

  CO

  City of Dawson Creek

  5+ YOECandidates need a two-year civil engineering technology or related diploma, at least 5 years of directly related experience, and AScT registration with ASTTBC or equivalent. A valid Class 5 driver's licence and AutoCAD proficiency are also required.

  AutoCAD, ArcGIS Pro, GPS RTK units, Total station

• 1d

  Senior Project Manager

  Toronto, ON

  Full Time

  SP

  STUDIO PAOLO FERRARI

  8+ YOECandidates need 8 to 15+ years of project management experience in interior design, architecture, hospitality or luxury sectors, plus a relevant degree. Strong knowledge of building codes, construction practices and advanced proficiency in project and CAD platforms are required.

  Bluebeam, AutoCAD, Microsoft Office Suite, Excel, Outlook, Procore

• 1d

  Marine Mechanical Engineer (Office-Based) – All Levels

  British Columbia

  Full Time

  3M

  3GA Marine Ltd.

  Candidates need a bachelor's degree in engineering, an EIT or P.Eng. eligibility in British Columbia, and strong CAD and drafting skills. Shipyard experience is preferred, along with clear technical writing and a willingness to travel and survey confined spaces.

  AutoCAD, Rhinoceros 3D, SolidWorks, ANSYS, ShipConstructor, Pipe Flow

• 1d

  Electrician for farm equipment

  Taber, AB

  Full Time

  PE

  PGS Equipment Ltd.

  Candidates need a strong foundation in electrical principles and experience with wiring, components and electrical schematics. Advanced troubleshooting skills, a trade certification or progress toward one, a valid driver's licence and a willingness to travel are required or preferred.

  Diagnostic equipment

• 1d

  Senior Project Manager - EPC

  Toronto, ON

  Full Time

  AE

  Aiolos Engineering Corporation

  15+ YOECandidates need 15-20 years of multi-disciplined EPC experience, including engineering design, fabrication and construction, and project controls. A post-secondary degree or diploma in engineering or construction management is preferred, along with fluent English and strong leadership and travel ability.

  Microsoft Excel, Microsoft Office, Email

• 1d

  Mechanical Engineer

  Vancouver, BC

  Full Time

  PG

  Pontem Group

  4+ YOEPontem Group needs candidates with a mechanical engineering degree and a P.Eng. from EGBC, plus 4+ years in building or mechanical consulting. They must know HAP, Trace 700, AutoCAD and Microsoft Office, hold a Class 5 driver's licence and communicate well.

  HAP, Trace 700, AutoCAD, Revit, Bluebeam, Microsoft Word

20 companies